Motor for TLT Would a magnetic mayhem motor fit on a TLT that has an extended wheelbase? Would Lathe motor? Would any stock 27 turn? |
Re: Motor for TLT i know a 27 will, i have a p2k pro2 right now until i get a lathe motor and for being a 27 it works fine |
Re: Motor for TLT The MM and lathe motors are 540-size motors so both will work. Any 540 size motor will fit. |
Re: Motor for TLT I was not aware that MM and lathe motors were 540 in size. Thanks for help |
Re: Motor for TLT Don't own a TLT but aren't MM's a little longer than normal? Dunno how tight the motor mount is in a TLT... Lathe motors are actually a little shorter than normal. |
Re: Motor for TLT Several peeps are running the MMs. They fit, but I don't recall any mods having to be done to the chassis or radio tray because they are longer. Should be a simple drop-in motor. |
Re: Motor for TLT Mag Mayhems are 550 which is a little bigger. It should fit, the motor cut out in the chassis seems a little longer than nessecary. I personally like the Multiplex 600, but that might be too long for the stock TLT chassis and tranny. |
Re: Motor for TLT :oops: I thought the MMs were 540s. |
Re: Motor for TLT A MM will fit in a stock TLT. I have, opps, had one in mine when it was together. It will also go back in the modded truck until I find something else that I might like better. |
All times are GMT -6. The time now is 06:29 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com