my new Tuber the frame i just bought (it a Boyer) got it today . i put the good stuff on it today hpi wheels , masher tires , tlt axles , maxx shocks & 5645 servo (hitec) got a super rooster , 3300 mh battery and Hitec radio (srx) to put in it . it had the stock tranny but i have a pede to go in it . bought a cut board tonite to make a new skid/tranny mount . got to get some drive shafts and some gears. i did order some bearings today .i think i will call it " Nucking Futs TLT " here is a lnk to a pic http://groups.msn.com/TeamM-C-RC-R-C...oto&PhotoID=12 what do you guys think of it ? |
I dig it;-) The skins look really good |
that's pretty slick, I need to get going on mine |
He does a great job on those chassis's. Looks good. |
thanks guys , i need to get some Rockrings for it. hey Unimoger what do you have ? oh yes i have a 55 turn lathe motor to go in it . what would be the best spur /pin gear to run on the pede tranny ? |
Very Nice. I'm gald that you like it. It'll be a better crawler with out that stock tlt tranny in there. |
Quote:
|
Quote:
I allways knew you liked the shaft:flipoff: Looks good man now get to work and get it ready for the arse kickin it will recive at bucks pocket. |
Looks real trick man.Boyer does kickass work! |
here is a link to another pic http://groups.msn.com/TeamM-C-RC-R-C...oto&PhotoID=13 |
Looks pretty good. I Like the color, it contrasts well with the aluminum. |
That's pretty sweet. I couldn't own something like that. It'd be a wasteful shelf queen. |
Thats a pretty sweet tuber! I really like the tube link mount in that last pic |
Quote:
|
very nice tubers are cool:-P |
well i worked on getting the pede tranny in tonite . i want to lay it down but it was just no way to do it . making the mounts was not hard. I used 1 1/2" alum. angle . I used the holes in the frame that was used for the stock tranny. it was still a very tight fit had to remove the ears on the tranny and set it abit to the front but it worked. now it look as if the frame was made for a pede tranny. i will try and get some more pics of it up soon . |
That's a sweet lookin rig ya got there :) |
here is a link http://groups.msn.com/TeamM-C-RC-R-C...oto&PhotoID=14 showing a pic of the pede tranny in .like i said before it was a tight fit had to breakout the old shoehorn . lol I got to get the sliders done now . |
i got the sliders done and the steering links made . i narrowed the wheels and put some of Unimoger's Rock Rings on .i got the batteries mounted . i put 2 on each side in the middle of the frame alittle bit closer to the front stacked on each other and 2 across the front axle end to end behind the servo. the super rooster looked out of place in there it was to big . so i got a novak XRS on the way . anyway a new pic for everyone . http://i109.photobucket.com/albums/n...FutsTLT007.jpg |
that last pic shows the shocks mounted to the links you might want to change that it has evry reson for torqe twisting out the A$$ but they are standing more upright then laid down so i dont really know how they react looks killer tho |
He will be ok as long as the springs are stiff enough. But you are right Marcus if its present its going to be hard to fight with the shocks mounted there. |
awsome looking rig, another rig from boyer i met john last sunday at the Bradenville comp he had some chassis with him up there. |
torque twist is really bad . this is my first shafty and man is it hard to get the twist out . as in the pics the shock are mounted to the links . my problem is the links roll causing the twist . try different springs / shock oil / even shocks . back to the drawingboard :shock: |
What do you mean your links roll causing the twist? |
as i have stated move the shocks to the axles and mopve the top of the shock to the front hole on the mount they will be laid back a little more giving more artic but also should fix most of the torque twisting problems |
yet another pic of the little guy . this time posing on top of my Super trucks . maybe you can see in the pic i moved the rear shocks to the axles and droped the front of the shock down. this really helped with twist . i also changed springs again . moved 2 of the batteries to the rear axle . anyway on to the pic http://i109.photobucket.com/albums/n...rawlers002.jpg |
It looks tiny next to your supers. It looks great. |
here is a pic of it at S.E.R.C.R.C comp (Buck's Pocket) on the final course . ended up with a 6th place finish . not bad for me and it being a new truck . only has 3 packs thru it even now . http://i109.photobucket.com/albums/n...e/03844910.jpg and another http://i109.photobucket.com/albums/n...sPocket016.jpg http://i109.photobucket.com/albums/n...sPocket121.jpg http://i109.photobucket.com/albums/n...sPocket026.jpg |
8-) Here's a link for a video... : http://www.rccrawler.com/forum/videos/43065-badds-boyer-%2A%2Anws%2A%2A.html |
Nice rig! DO you know if that is solid rod or tube? I am guessing solid as I don't see a ton of bracing. The aluminum plates could be hiding it, but I can only see the last few pics (I cannot see the ones on MSN). I hope to put one together this winter (when its not 100 outside) and am slowly putting togther my tools. |
Trikster it is made from solid rod . the builder is John Boyer , he does really great work . I have always wanted a Boyer Buggy . here is a few more pics of it getting "NUCKING FUTS" . http://i109.photobucket.com/albums/n...GT91706056.jpg http://i109.photobucket.com/albums/n...GT91706052.jpg |
wow thats an awesome video...???? |
well I think this pic ends the Boyer story . lol my little girl has takin' over !!!!!!!!! http://i109.photobucket.com/albums/n...cherCTN016.jpg |
nice job on that rig and vid.. |
well the little Boyer now has a new home in OR. it was sad to see it packed up and going out . @tw!ll is the new owner maybe he will love the little rig like I did and keep the pics coming |
Oh yeah! Can't wait to get it. Scoping out some cool crawling spots right now. Definately get a few pics when I get it (if it's not raining:-(). |
Got it! Wouldn't you know, it's pouring rain.:-( Just my luck. Hopefully this weekend it will dry out a little.:) Thanks to Badd for such a bada$$ ride. |
you can change the name of the little BOYER , but to me it will always be Nucking Futs . lol I name all my rigs and that name just fit it well . it is to do with how I got it . anyway glad you like it / drive the piss out of it and have fun . "thumbsup" |
I wanted to add this link http://www.rccrawler.com/forum/showt...ighlight=boyer it is the Boyer . the new owner is doing a good job on it . "thumbsup" this is the one I'm sorry I didn't keep . but at the time I need to get 2 more rigs up and running . |
thats a very nice rig boyer knows his stuff "thumbsup" |
All times are GMT -6. The time now is 02:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com