No Name comp buggy pic added Well I've been sitting on some 3/16" Cromoly tubing for a while and today the latest RCKJEEP creation was started. I've got some pics taken but don't have a way to upload them here so you'll have to wait. It's a small buggy with function in mind. It'll be filled with a 45t lathe motor attached to a stealth tranny. I'll use some front associated truck shocks most likely and will sit low. A WB is yet decided but probably 12.5 inches. Once it's done We can figure out a name for it. What was the other dogs name from the Warner Bors. cartoon. There was Ralph and ? Anyway I'll try and get some pics up soon. Now I have to decide which rig to dismantel for parts the Rockstar chassis or the truggy? Hmmmmm |
Cool. Can't wait to see some pic's.:) |
Quote:
rich |
it has to be as sweet as your rig now... |
I'll try and upload the pics today. It's not much currently but I'll let you guys be the judge. EDIT: Of course I can't find my USB cable to upload the pics. Man moving is frusterating. I did how ever order another 6' of tube to finish it off. Hopefully it'll get here before the weekend so I can finish the chassis. |
1 Attachment(s) So I may trade my clod roller for some RC4WD narrowed beadlocks which I think would be sweet on this buggy build. Here's a pic of them |
Sounds sweet. Congrats on moving. |
Quote:
|
finally a pic |
I like it.:) |
Sweet dude! looks cool :) :) |
Really cool!!! |
i like that idea in desgin work. rich |
Thanks guys I may end up cutting the front off and tweak it a bit. I just got another 6' of tube to finish it off this saturday. |
here's a mock up of the WB and would be ride height. The front end is definitely getting cut off. http://www.nor-calrcrc.com/albums/album40/aaf.sized.jpg http://www.nor-calrcrc.com/albums/album40/aad.sized.jpg |
Looks mean, I like it. I saw leave the front section, it looks like nostrils... |
Quote:
|
Looking good.... The stance in post #15 looks great! I can't wait to see how this project turns out. Great start. 8) |
Looks good. I have buggy in the works that looks alot like that. |
so here are the stats I'm shooting for. Cro-Moly tube chassis Stealth tranny TLT axles spider gear locked and shaved(ooohhhh shaved) Inet Knuckles up front (when they are available) Masher 2k's on narrowed HPI's or narrowed & dyed Pedes with Rock Rings 12.75" wheelbase 2.25" of GC Driveshafts are still up in the air depending on how I adapt them to the stealth tranny. Shocks will be Associated 3.5" truck fronts most likely |
All times are GMT -6. The time now is 08:21 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com