Pics of my new 2.2 rig... almost done.

[insanerc]

Originally Posted by srjeeper

How do I get the wider skid plate?I have 3/4" wheel wideners so clearance shouldn't be a problem,I hope.

Since you had originally asked for R2 holes we'll go ahead and make you up one for free. I'll let you know when we ship it out.

David
Xtreme Rc Hobbies

[srjeeper]

Originally Posted by insanerc

Since you had originally asked for R2 holes we'll go ahead and make you up one for free. I'll let you know when we ship it out.

David
Xtreme Rc Hobbies

Thanks, Your the greatest! does that include one of your windsheild decals? I'll be sure to order from you again.

Shawn

[xxizzer421xx]

i was wondering what battery u ran and about how ong it lasts

[dotson]

how did you gt the axles to point up so the driveshaft can get in without being on an axtreme angle ? i have the same chassis and dont know how to set it up for my pede tranny

[mrpink]

Originally Posted by dotson

how did you gt the axles to point up so the driveshaft can get in without being on an axtreme angle ? i have the same chassis and dont know how to set it up for my pede tranny

axles are not tilted in anyway.. I am not sure what the problem is with your setup; maybe try and snap some pictures of what you believe to be the problem area?

I know many, many people use this chassis with the pede; I am sure one of them can chime in on any issues they may have come across in thier build- using the R2, I had no problems what so ever.


As for the battery setup- see my first post in this thread- it goes over what I am using and where I got everything. Run times off a sh!tty charger are about 30min-45min with the BL setup.

[bmccoy]

I have to say, that is one awesome rig.

Ben

[mrpink]

Originally Posted by bmccoy

I have to say, that is one awesome rig.

Ben

well.... if you have to say it... then I guess I have to accept it.

thanks.

got some new stuff coming so look for some updated snaps soon.

[rubiconkid3]

i wish mine could look like that

[PaloAltoK5]

Originally Posted by dotson

how did you gt the axles to point up so the driveshaft can get in without being on an axtreme angle ? i have the same chassis and dont know how to set it up for my pede tranny

Adjust the length or mounting position of your upper links to get the proper pinion angle. Just like on the real thing!! Remember, in a perfect world your upper and lower links should be parallel, this keeps the pinion pointing in the same direction throughout the travel of the suspension.