TLT 10 Lathe motor 14 pinion, 96 spur, 3600 smc bat., ESC rooster, Hobbyco CS 80 servo, futaba mag sport radio. Moabs on Tamiya rims narrowed on inside only, locked front and rear w/jb weld. custom links 96mm dogbones front and rear. WB is 11 5/8, The rig is under construction as of today the 26th getting a pede tranny laid down, new chassis made from aluminum and a XRS instead of the rooster. keeping the moabs. maybe this build I will give the fj 40 a paint job and rest it on top of the new rig. I will update with progress...oh and a new wb of 12". http://photobucket.com/albums/a89/stump_/ http://i9.photobucket.com/albums/a89...13_5178693.jpg |
mine too! |
1 Attachment(s) My scale 2.2 Clod |
|
Tlt My TLT all scratched up with custom gearbox Click for larger image. http://img119.imageshack.us/img119/4...08077ha.th.jpg http://img120.imageshack.us/img120/1...08151vg.th.jpg |
1 Attachment(s) Finally got a TLT , TSC-10..... |
|
|
Realized that i never put a pic of my rig in here http://i17.photobucket.com/albums/b6...nginditch4.jpg Problem solved |
1 Attachment(s) Mine at home.... Ed |
Sw-2 |
Here's R-tich ROAR CHASSIS 12.5 " LONG TRAXXAS LINKS HPI'S WRAPPED WITH MOABS http://img265.imageshack.us/img265/4282/img02712ul.jpg |
This is my crawler purchased from Kingcobra. http://img169.imageshack.us/img169/971/x8th8dy.jpg |
http://img.photobucket.com/albums/v7...n/100_0062.jpg Hulk Werks prerunner ford f-150 extended cab tlt axles locked layed down stampede trans complete metal geared locked rpm narrowed wheels moab tires super rooster esc novak fm reciever jr 590 front servo futaba 9402 rear servo Juggsterr rock rings traxxas aluminum 4 links traxxas aluminum shocks traxxas sliders http://img.photobucket.com/albums/v7...r/100_0831.jpg Ford Courier- custom built lader frame standup locked pede trans tlt axles locked maxx shocks maxx aluminum links traxxas sliders maxx shocks blackfoot roll bar w/ 3 ram lights hpi narrowed 5 star wheels geolander tires rear sway bar custom hood mounted high lift jack rock rings JR esc JR 650z servo JR synthesized reciever Mike |
Ok I'm adding a pic of all my scale rigs. The RBX Jeep, the Truggy, and the Mountaineer. Enjoy http://www.nor-calrcrc.com/albums/album02/ada.sized.jpg |
project "Billy Bob" |
|
1 Attachment(s) My latest build. Seen here: http://www.rccrawler.com/forum/tamiya-tlt-crawlers/22511-scale-bronco-comp-crawler.html |
|
1 Attachment(s) TLT, Masher 2K's/Stampede rims, Lathe, Tekin Titan. Stock chassis/trans with locked TA04 gear center diff. |
1 Attachment(s) TLT tuber. RC10 tranny, Maxx shafts, 3-linked fr/rr, winch, XRS, lathe motor, 2.2 swamp dawgs, sorry for the counter crawler pose- camera is fried. Will post an action shot as soon as I can. |
Here are two of my trucks. first, the toyota fj-40 scale build.http://www.nor-calrcrc.com/albums/album21/aae.jpgsecond is my comp TLT cj-8. http://www.nor-calrcrc.com/albums/album20/aaa.jpg |
2 Attachment(s) My Tlt |
Chassis: BrandO tube frame Wheels: Pede front (Painted black) Tranny: Pede (Locked) Axles: TLT-1 (Locked) Tires: Imex Swamp Dogs Drive shaft: Jato Wheel base: 12" Body: HPI Ford Bronco http://image.rcuniverse.com/forum/up...75/Yt61363.jpg |
Kyosho 4Runner TLT SAS 4 linked locked axles Lock pede trans JR ESC Kyosho motor with 12 tooth pinion airtronics radio JR 650z servo stock wheels with JUGGSTERR bead locks and Moabs http://img.photobucket.com/albums/v7...r/100_0231.jpg |
tlt base, pede tranny, imex hawgs |
Trilobite After many incarnations this is what I have arrived at SPECS: TLT axles Pede Trans 65 turn integy P2K mashers 2.2 Hpi rims Custom Aluminum back bone Custom Links 60/40 link setup Hitec servo inet rc axle widners Novak ESC Futaba receiver and radio http://i20.photobucket.com/albums/b2...t/IMG_0843.jpg |
Here are a couple of mine...They both have the usuall... http://i25.photobucket.com/albums/c1...cklogic017.jpg http://i25.photobucket.com/albums/c1...o/f-100010.jpg http://i25.photobucket.com/albums/c1...o/HPIM0776.jpg |
So here are the specs... UTRCRC Jefferson Chassis Full bearings 55t lathe motor msr4 piggy backs Super Rooster 3300 pack (Thanks Peter) 645's front and rear HPi narrowed wheels w/ moabs Pede tranny G-Made wideners 11 7/8 WB 2 3/4 gc 10 1/2 wide Body was airbrushed by RockBunnyIP thanks Peter! http://i1.tinypic.com/nb22s8.jpg http://i1.tinypic.com/nb22ye.jpg |
New lid for my bruiser http://img486.imageshack.us/img486/1534/pcdv00166lj.jpghttp://img528.imageshack.us/img528/5417/imga00393ay.jpg http://img486.imageshack.us/img486/2002/pcdv00171oo.jpghttp://img509.imageshack.us/img509/2552/imga00412gg.jpg http://img49.imageshack.us/img49/6826/imga00465de.jpghttp://img49.imageshack.us/img49/6905/imga00449uk.jpg OR should I use it for my TLT build up :twisted: |
here is my tlt crawler http://i47.photobucket.com/albums/f1...x/100_0931.jpg this is my first tlt biuld. cant take all the credit i bought some of it. |
Here's my TLT crawler courier scale body http://i40.photobucket.com/albums/e2...1/IMG_0685.jpg poser shot with a ford beater body http://i40.photobucket.com/albums/e2...1/IMG_0683.jpg http://www.rccrawler.com/forum/showt...815#post244815 |
Meet Black Sunshine |
1 Attachment(s) my 2.2" clod , not particularly scale but........ |
|
2 Attachment(s) Maxx 2.5 shafts Hot bodies Emaxx shock's, HPI MT springs Pede tranny 87,12 45T lathe Hitec 645 MG swamp dawgs (soon to be Moabs) RPM wheels W/ skipstr's rock ring's |
Scale Rubicon This is my first endeveur into rc's. Sw2 based TLT. Locked f/r diffs. Mechanically locked Stampede tranny. Splined slipper. Futaba electronics. Xl-1 esc. Pinched Moabs on Pede rims. Eagle 55t, 12t and 87t. 4x'aa' dump regulation. MSR-5 Piggies w/ the Stiff a$$ springs. W.B. 13.021" Standover: 3.15"http://http://img47.imageshack.us/img47/9899/dscn03238lx.jpg |
solid tube frame w/ hacked up Jeep Rubi body tlt axles locked locked pede trans traxxas links masher 2ks on narrowed HPI wheels with Daves rings simulated fuel cell (jr FM reciever hidden within) SR esc shovel and axe mounted Integy 170mm piggy back shocks jr650z high torque servo http://img.photobucket.com/albums/v7...tltjeep005.jpg |
Tlt-1 New here-Great site guys.Lots of useful info.Heres a few shots of my modded TLT-1!!!:mrgreen: http://img219.imageshack.us/img219/3...9medium9ky.jpg |
Tlt-1 Another!!!:mrgreen: http://img20.imageshack.us/img20/278...1medium6uo.jpg |
All times are GMT -6. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com