here is my new christmas pres to me....lol i couldn't have built it with out the information based off of these forums so to all who are on here thanks much...it has a pede tranny, integy lathe 55 turn, moabs, associated bead locks and my own dirty hand cut bulu look alike plates... http://i142.photobucket.com/albums/r...h_P1010007.jpg http://i142.photobucket.com/albums/r...h_P1010009.jpg |
3 Attachment(s) This is my TLT BRONCO, running stampede tranny, 2.2 Dawgs, locked all diffs, Traxxis links top and bottom,TNX Shocks. |
|
The Shadow 1 Attachment(s) Here is my latest addition to the stable. |
The new kuala. By the turtle! |
1 Attachment(s) here's mine with a Koala Chassis by M&L. |
1 Attachment(s) ok will do |
My Competition Rig “Hayward” now water proofed My Competition Rig “Hayward” now water proofed with pictures and new updates sw2 pede tranny pede shafts 55turn axles shaved, locked, trimmed, greased and shimmed rooster tq3 with rear steer mod hs 645 mg the usual lots of time put into it waterproofed extensive build up recap the build up thread http://www.rccrawler.com/forum/tamiya-tlt-crawlers/44693-my-competition-rig-%93hayward%94-now-water-proofed-pictures-new-updates.html http://img209.imageshack.us/img209/5...pageqo5gi3.jpg http://img209.imageshack.us/img209/5...nsetam1cs9.jpg http://img209.imageshack.us/img209/5...ffedki0ev6.jpg http://img461.imageshack.us/img461/483/10flexir8sf8.jpg http://img209.imageshack.us/img209/3...akedph2ul9.jpg |
Wow, I Need A Bigger Photo |
It needs a new tranny, chassis and I'm gonna extend it another inch and it should be good! http://img.photobucket.com/albums/v2...Crawler003.jpg |
Here's my crawler, body's new but the chassis has been beaten up a bit...luckly its hard to tell. http://img150.imageshack.us/img150/7...ncedhx2.th.jpg http://img45.imageshack.us/img45/553...ncedxx0.th.jpg Tracer Chassis TEU-101BK w/stock tamiya can motor Futaba S3010 servos front and rear Traxxas extra long plastic shocks w/45wt oil Hpi wheels w/moabs Full ball bearings Traxxas slipper pegged centre diff Sort of posi front and rear diffs...the spider gears are shimmed with belville washers to provide differential resistance but still allow some differential action. The tension is enough to pull the truck up rocks without one wheel spinning however it still turns well on high traction surfaces like asphalt. |
Custom Jeep Wrangler 2.2 - Handmade chassis - Integy 55T - Pede tranny 83T/19T (tamiya module) - Jeep Wrangler Rubicon body - Tires -Yokohama Geolander - ESC Tamiya TEU-101BK - servo Acoms AS-16 :mrgreen: http://img170.imageshack.us/img170/9...6496hu0.th.jpg http://img444.imageshack.us/img444/6...6556uz4.th.jpg http://img230.imageshack.us/img230/3...6466kz4.th.jpg Action Video (~48MB wmv) http://www.upitus.com/download.php?file=32c9a755 |
3 Attachment(s) sw2 645mg integy 55t e maxx shocks all t's narrowed stampede wheels stampede tranny |
4 Attachment(s) some pics of my P4 |
|
Finally got my Dodge done I finally got this thing done, seems work takes up most of my time. Anyways, I cut the frame out of an aluminum bumper reinforcement from a car, reciever and controller from an old car I have. I also had some servos from my old tmaxx and the tires/wheels from a HPI nitro mt. http://dodgetruckworld.tenmagazines....360/339945.jpg http://dodgetruckworld.tenmagazines....360/339944.jpg |
2 Attachment(s) Specson FLASH: XRS ESC Pede shafts Pede tranny ( locked ) Locked tlt axels RPM wheels I found somewhere. Masher tires. (will be masher 2ks soon) on some beadlocks Deans plugs Will have reciver pack soon F-650 Body. |
*TLT axles locked with quick steele *Home made chassis *Home built servo/upper link mounts *Maxx shocks *Pede tranny locked with quick steele, metal top and center gears *Driveshafts built with pede shafts and steel yokes at the axles. Plastic yokes at tranny as a weak link *Nitro Rustler wheels-single narrowed *M2k tires, 3 oz weight in fronts, 2 oz in rears *Home built links from 6-32 and sleeved with aluminum *Parma 454ss body-slightly trimmed *645mg servo *Tazer ESC Yesterday was my 1st time driving it, or any crawler for that matter. Took 6th place with her. "thumbsup" http://memimage.cardomain.net/member...03_20_full.jpg http://memimage.cardomain.net/member...03_21_full.jpg http://memimage.cardomain.net/member...03_22_full.jpg |
|
stock tlt mtroniks viper esc traxxas tq3 integy 45t locked central diff with silicon locked front and rear diffs spider way onto the pictures http://img19.imagevenue.com/loc135/t..._122_135lo.jpghttp://img160.imagevenue.com/loc216/..._122_216lo.JPGhttp://img101.imagevenue.com/loc18/t...2_122_18lo.JPGhttp://img154.imagevenue.com/loc224/..._122_224lo.JPG http://img127.imagevenue.com/loc160/..._122_160lo.JPG click the pictures |
Yet another first attemp with a TLT 1 Attachment(s) RYY's first attempt at a TLT crawler; 12.25 wheel base G-made widners Sw2 chassis Jrxs, Tekin rebel II, Matrix 55t pro, Locked pedes, Locked TLT diffs. Narrowed HPI w/ custom foams. Attachment 27624 I am hooked w/ more to come............. |
My first cut up stock chassis: http://img.photobucket.com/albums/v2...ssisrtside.jpg My new Kuala chassis: http://img.photobucket.com/albums/v2...ect/Kuala7.jpg http://img.photobucket.com/albums/v2...ect/Kuala4.jpg Current stats: Kuala chassis Stampede tranny locked with JB Weld Traxxas hard anodized aluminum idler gear Traxxas steel outdrives at the axles, plastic at the tranny Pede axle driveshafts TLT-1 axles locked with JB Weld Tamiya TG-10 stub axles (so the wheelnuts have full thread engagement) Stampede wheel hexes Maxx lower links AE 4" shocks inverted Pede rear wheels Pro-Line Moab 2.2s Hi-Tec HS645MG steering servo Inverted Y steering linkage (thanks to Deiselpower for the idea) Integy 45 turn lathe motor 12/87 gearing Airtronics MX-3 tx Novak Rooster ESC Hi-Tec micro rx 12.5" wheelbase Proline 70 Ford F100 body |
pimping "R2D2" all i have to say is thanks to kila and sheldon"thumbsup" ......... http://i74.photobucket.com/albums/i2...a/DSC00368.jpg http://i74.photobucket.com/albums/i2...a/DSC00376.jpg |
2 Attachment(s) SW2 now a SW3 Pede trans 2.2 Moabs Narrowed 2.2 Stampede Hot Bodies shocks -adjustable Team Losi Sport ESC Hitec 645 servo Integy 55t Traxxas transmitter & receiver |
California Tuberalis Home made tuber,links and mounts pede trany Hacker brushless w/mamba 25 rc4wd super narrow beadlocks moabs Woodland camo (1st paint job) http://i141.photobucket.com/albums/r...erwithcamo.jpg Desert camo (2nd paint) http://i141.photobucket.com/albums/r...x/IMG_1384.jpg |
i froze my what off for what? This was recently completed (outside in the shed) during the ohio freeze. I miss global warming. Raided the SW2 to get this far, it sure doesn't crawl as well. The SW2 will be reincarnated when the weather is nice enough to actually go outside. That Bender must really know his stuff. "thumbsup" http://i162.photobucket.com/albums/t...lers/frame.jpg http://i162.photobucket.com/albums/t...rawlers/W2.jpg |
My SW2: 1. Silver SW2 chassis 2. Integy 55 turn hand wound motor 3. Stampede transmission 4. M.troniks ESC 5. Traxxas TQ3 and reciever 6. Hitec 645MG Servo 7. Proline Masher 2000 tires on Black HPI Spike Wheels 8. HPI Jeep body 9. Stampede Driveshafts http://i128.photobucket.com/albums/p...0/IMG_0555.jpg http://i128.photobucket.com/albums/p...0/IMG_0563.jpg |
http://i15.photobucket.com/albums/a3.../021007-30.jpgrdxl4 chassie, inetrc alum axels, 55t lathe, hpi landy body, |
Purple Pimp slap modded edition Prototype Pimp Slap chassis Pede tranny Revover2 w/mamba 25 2c lipo stick pack Mashers on narrowed pedes w/ Hand Bros roc rings 72 Chevy body Thanks to Syco133 for the chassis. http://i141.photobucket.com/albums/r...x/IMG_1308.jpg http://i141.photobucket.com/albums/r...IMG_1366-1.jpg http://i141.photobucket.com/albums/r...x/IMG_1304.jpg |
Here's my TLT /SW2 crawler. 55t lathe motor, Super Rooster ESC, 87t spur w 12t pinion, 1400 6 cell Intellect battery (get about 45 min runtime), Pede tranny, Moded Jato driveshafts with metal yokes, 105mm lower links covered by 1/4" fiberglas tube, T-Maxx shocks w/ 2.5"orange Losi springs, Moab tires w/ Trailmaster rock rings mounted on chrome Stampede wheels w/ 6oz of weight in each tire, 3/4" wheel wideners, HPI bug body, Boyd Dark smoke metallic paint and gloss black paint for the windows. http://i99.photobucket.com/albums/l3...DSC00647-1.jpg http://i99.photobucket.com/albums/l3...S/DSC00642.jpg http://i99.photobucket.com/albums/l3...DSC00648-1.jpg |
Sure Joe, heres a couple of different angles and yaa that's the bantha skull from Star Wars. Have a buddy that can make vinyl decals and thought it would be a cool design to have on the crawler. http://i99.photobucket.com/albums/l3...S/DSC00654.jpg http://i99.photobucket.com/albums/l3...S/DSC00653.jpg http://i99.photobucket.com/albums/l3...S/DSC00652.jpg |
my Rig TLT chassis and tranny traxxas 108mm, 118mm link 55t itegy lathe motor TQ3 tx, 2215 rx custom servo mount 5645 front, 2055 rear steering servo baja bug body traxxas emaxx shocks/losi white springs junfac front skid plate imex red rock tires, ebay bead lock rings http://img.photobucket.com/albums/v3...n/DSCN2678.jpg http://img.photobucket.com/albums/v3...n/DSCN2679.jpg http://img.photobucket.com/albums/v3...n/DSCN2680.jpg http://img.photobucket.com/albums/v3...n/DSCN2674.jpg http://img.photobucket.com/albums/v3...n/DSCN2681.jpg enjoy |
The MMMonster Heres the rig!(yes Ed thats your beautiful) Tlt based Hpi ford bronco "the monster" integy 55 turn 15t pinion Bulu2 chassis"thumbsup" Proline Moabs Stock traxxas rims Locked pede tranny Tq3 radio hfx-r ESC(unmounted at the time) (soon to be replaced) turbo-rix survo MG995"thumbsup" shoe-lace tow strap:flipoff: On to the pics http://i171.photobucket.com/albums/u...monster004.jpghttp://i171.photobucket.com/albums/u...monster007.jpghttp://i171.photobucket.com/albums/u...Monster002.jpghttp://i171.photobucket.com/albums/u...monster005.jpg |
scale frame tlt |
"Mee" Pimp Slap 12.5" WB 55t Lathe Pede Tranny XRS Nothing special... "DRAMATIC" Ummmm Hmmmm http://i12.tinypic.com/35i3pfm.jpg http://i9.tinypic.com/2agsw40.jpg http://i12.tinypic.com/47iu838.jpg http://i17.tinypic.com/4e08ks1.jpg |
SW2 Reborn!! |
I just got a Treo and I get my work e-mail and stuff now - so I can try to post a pic and see how it looks... http://img171.imageshack.us/img171/6...0207003nx3.jpg Ugh - that's disgusting. Maybe I could clean them up w/ Photoshop or something. I need a real camera... |
5 Attachment(s) project cetane... was a bmv2 now its a k2-3s |
5 Attachment(s) action shots of cetane and blacksmoke in st george ut |
4 Attachment(s) Couple different bodies on the same rig.... Attachment 30282 Attachment 30283 Attachment 30284 Attachment 30285 |
All times are GMT -6. The time now is 08:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com