TLT Crawler Picture Archive Ok here's the deal guys, if you would like to submit a picture of your truck you can do so here. There are some rules, so allow me to bold these so you read them :lol: *Pictures must not be any larger than 640x480 *You may only submit ONE picture of your truck *Your truck must be complete, no poser shots of your truck without driveshafts, or shocks, or the chassis sitting on a spray can *You may link to a thread about your truck and you may link to a site containing more pictures *Do NOT list out addresses to individual pictures *If you would like to change your truck's picture, please edit your post accordingly *Anyone not following these rules will have the rules enforced onto their post as the mods see fit, ie: removing excess pictures, deleting multiple links, deleting of the entire post if too many rules are being broken for us to simply edit the post The main thing here is we want to show off your trucks, but we don't want people suffering with long load times to get the pics up. We also don't want rccrawler's bandwidth to go down the toilet. Not everyone is running monitors at 1600x1200, so small pictures are appreciated. Thank you and post away! |
1 Attachment(s) Allow me to start: This is my TLT-10 with my custom TSC-10 chassis. I will get a link to information on the truck itself later. New comp. ready setup (yes, I drove up and over this obstacle): |
Edited Hey PWT's I've seen that pic like 3 times before in different threads. But its so awesome, I'm fine seeing it a fourth time! :flipoff: But you know it's missing something. Mmmm oh Rock RIngs Ya that's it! Here's mine, and I don't know how to resize yet. Badger Help! http://www.nor-calrcrc.com/albums/TTC1/aff.sized.jpg Though I don't own it anymore :cry: I'm leaving this picture up because I miss Ralph. Anyway one to the latest creation http://www.nor-calrcrc.com/albums/album13/aal.sized.jpg http://www.nor-calrcrc.com/albums/album13/aag.sized.jpg Here's the latest http://www.nor-calrcrc.com/albums/album40/aat.sized.jpg |
Pitbull Here's Pitbull. http://www.photodump.com/direct/Rikpal/22147.jpg Modified Tonka Body, TLT axles, TXT tranny, homemade frame, working lights (all) and winch, homemade rollcage and bumper, snow chains, snow plow. Link to the site page will be added when the page will be updated :) |
1 Attachment(s) I dont actually have it yet, but I sent my money out yesterday! Can't wait till she's here! |
hey im been cruzin round this forum for a while now and decide to register. here my tlt. http://img65.exs.cx/img65/8213/rockbuster0153zd.jpg thats wat it look like in dec. now i got a stampede tranny with plexiglass chassis. |
|
|
Here is my TLT with 1/6 scale GI Joe body and Emaxx 2 speed tranny http://www.imagestation.com/picture/...9/f5471aab.jpg |
my tlt |
Tlt-bulu 2 Here is my TLT-B2 "VADER", it has an 12.75" WB http://i3.photobucket.com/albums/y52...BAYPICS008.jpg A Link a Thread with more Pictures "Lord Vader" |
Trail TLT WB-12.5" W-10.5" H-9" TS-4.75" http://www2.mini-zracer.com/albums/a...5/DSCF0158.jpg Custom: Chassis Tranny mounts Links Shortened maxx tranny Servo mounts Shock Mounts Body mount Locked Diffs E Maxx tranny Lathe motor Maxx shocks Maxx shafts Mashers Pro-line FJ40 HPI split 5's |
Here's my TLT - Project Bummer. More info here: http://www.rccrawler.com/forum/tamiya-tlt-crawlers/5420-project-bummer-buildup-crawling-pics.html http://img131.exs.cx/img131/6850/dscn50191cn.jpg |
1 Attachment(s) Here's my newly completed 2.2 TCS Extreme: Truck base: TCS Extreme chassis, clod axles w/stock pinions WB: 12.25" Track width: 12.5" (outside to outside) Weight: 5lbs. 14oz. (RTR w/batt. & body) Clearance: 1 5/8" under axles, 5 3/16" under chassis :flipoff: Overall height (with body on): 10.5" Tires/Wheels: Imex All-T's, dyed HPI wheels #2135 Motors: 55T integy lathes Batt.: 8 cell Kahn brick (2/3A - 1050mAh) Elec.: HS-645MG's F&R, mod. TQ3 from http://www.thecrawlerstore.com , Novak EVX esc. |
Truck: Tamiya TLT-1 Wheel Base: 12.25" Width: 11.5" (outside to outside) Tranny: Stampede Chassis: Modified TLT chassis Shocks/Springs: Dynamite Shocks – Associated green rear truck springs – 80wt oil Tires/Wheels: Pro-line Masher 2000/Ofna 2.2 wheels Motor: 27T Integy modified to 0 degrees timing Servo: Hitec HS-5645MG Digital http://www.thefordmccord.com/pics/rc...t/Mvc-199f.jpg |
-TLT Axles- -tamiya carbon fiber chassis -locked center and rear diff -custom 4 links and steering links -traxxas sliders -RPM typhoons 2.2 -2.2 swamp dawgs -axle mounted shocks -4 wheel steer sorry for the crappy pic couldnt find my good camera http://pic3.picturetrail.com/VOL18/6...2/91132574.jpg |
Newly built TLT Crawler (from Custom Crawlerz) 1 Attachment(s) Here is a pic from yesterday of my TLT. It sticks to the rocks better than my TXT. :) It's features are. Stampede tranny, INTEGY Lathe motor, Masher 2000's on HPI superstar rims (w/o foams), Independant 4 wheel steering, MAXX shocks, CUSTOMCRAWLERZ TLT chassis,(to NEW to be in production yet) 13" WB, NOVAK Super Rooster, and a custom 4/5AA pack. |
Buster Custom TLT12L chassis carbon and Kydex WB- 12 3/8" Track- 10" Center clearance- 3 1/4" Height- 5 1/2" Weight- 5 lbs 2 oz TLT axles w/alloy knuckles TCS clocked Cs frt RC4WD straight axle adapters rr RC4WD spools, WK/AX10 clamping hexes, and full ball-bearings Hitec 5998TG BTA Hitec 5645MG rear axle forced articulation and Hitec 85MG transfercase Custom V.3GT2 transmission w/4.09 to 1.0 ratio inline transfercase w/4WD,FWD, and front dig Mamba 25 w/TCS BM6 brushless and 1400mah 9.6v pack Torsion bar frt and rr suspention M2K M2s w/hacked foams w/Axial beadlocks rear M2K M3s w/hacked foams w/narrowed Axial beadlocks frt with 2.5oz B.B. weights in each front B3 type buggy body DX6 tx/rx http://i82.photobucket.com/albums/j2...7/IMG_1759.jpg http://i4.photobucket.com/albums/y13...r/IMG_1642.jpg Build Thread http://www.rccrawler.com/forum/tamiya-tlt-crawlers/8374-project-bula-buster.html |
Here are my two latest rigs http://www.imagestation.com/picture/...f/f47e488d.jpg http://www.imagestation.com/picture/...f/f45fe98a.jpg |
Here's my TLT: http://i2.photobucket.com/albums/y5/...T/DSC01336.jpg Homemade chassis, pede tranny, M2K's, Traxxas shocks, Cirrus servo, and Hummer body |
All times are GMT -6. The time now is 06:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com