drive shafts..
 

Ok i bought the Integy drive shafts and no joke i was taking my truck out for the first time. i brought it in cuz it quit climbing so i looked it over all 4 pins are loose and one of them is gone. soo i am pissed off. I wrote them a email nothing back yet just wanted to let you guys know that the upgraded shafts suck just as bad as the stock ones...other then that the truck was working great "thumbsup"

most of us run revo shafts... sorry to hear you had problems

BigSky
i was just reading a post on the hpi Baja forum
it was about the integrety parts and no one realy had anything good to say about theese parts
might be better off paying a little more and get good parts than paying less for bad parts.
Dirby

i just got a set of integrijunk axles (they call them drive shafts) for mine, what peices of shit. The pin is 1/2 the size of the stock pin and they will not even stay in the joint, also the splines are not cut deep enough fnd the axles bottom out before they will insert all the way.
Biggest waste of money.

Good thing that this was the only thing i bought from intejunk and it will be my last.

Finaly Arrived
 

My shocks finaly arrived yesterday arvo.
Still will be the first and last thing i buy from them.
They only replied yesterday aswell, all they had to say was check with usps tracking its not their problem

well i went to Montana bolt and got some roll pin's so it should hold alot longer then one half an hour like before..8)

I was going to try a set of the shafts guess i will try something else now.

well i tryed to fix them but it just seems like once i get one problem fixed one more pops up:-x so i have decided to buy something else what do you guys think about a punisher shaft from rc4wd?

Revos, you'll never regret it.

X2 on the revo's

I've run the Punishers for the AX10, and I think they are a good unit, but they are heavy. Revo's are still top of the food chain.;-)

well the whole truck weighs in at 12 pounds soo a little bit of weight wont make that big of differences to me. As for the revo shafts don't you have to mod. them? to make them work and that i need them to be 7in long max. All i am looking for is a shaft that i can just put in and leave it alone.without it falling apart.

http://i234.photobucket.com/albums/e...t/IMG_1389.jpg