My Custom Super Comp 15er-k2-5-s
 

Wanted to get back into the super's sceen so what better then to build another 14-15er based TXT. I've been looking around for quite some time now for a chassis that I could use for the base of this build. So of course when I saw the all new super stunning K2-5 tummy tucked chassis:lol: I new it was the one I've been longing for. I want to thank Brett from REIGN for sending me one of his prototypes and for his understanding on the mods about to take place."thumbsup" So with that being said I'm stoked to get started.
The body and chassis are what I have been working on until my parts start showing up. I modified the K2-5 to a modest 12" S model;-) in order to tuck tightly under the grapler body I have chosen to use.
http://img508.imageshack.us/img508/7...1049ow7.th.jpg

http://img296.imageshack.us/img296/9...1051px2.th.jpg

http://img184.imageshack.us/img184/9...1053ur4.th.jpg

http://img184.imageshack.us/img184/7...1054qr6.th.jpg

Is it done yet? You've got 2 weeks until the next comp. ;-)

:lol::lol: If I only had sponsors:roll:

:lol:

What tranny did you decide on?

WATER LILIES?!? Is that your plan of attack? :lol:

Will it be painted snowbunny white too?

:lol:
Aroma therapy"thumbsup"

Oh I'm sure it will be something of that sort8)

I"m leaning towards the AX-10 with VF dig and all metal gears.

Specs
 

So far this is what I have planned.

SPECS:

CHASSIS: Reign modified K2-5

BODY: Losi Grapler

AXLES: TXT W/ EGRESSor 4:1 Gears

TIRES: Proline Max Mashers

WHEELS: Maximizer

SERVO: Front JR 8711; Dig Servo JR DS 3421

TRANSMITION: AX-10 W/VF DIG all metal gears

MOTOR: HH 10 Turn Colbalt

LINKS: 3/8" Delrin W/Jayto ends

DRIVESHAFTS: Max

SHOCKS: Losi 4" Crawler

ESC: Mamba Max

BEC: Castle

RADIO: Spectrum DX3

Battery: Holmes Hobies Elite 8 Cell Hump Packs

Gonna be sweet J! What is the deal with you and 14'ers??:)

:mrgreen: Must be little man syndrom:)

This is going to be a sick build.

I can't wait!

8)

I'll be watching, I love me K2-3S TXT"thumbsup"

14er?






















http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg
http://www.chickensnack.com/flash/haha.jpg

:shock::shock:

Sick! Let me know when I get to buy it!!:lol:

:lol::lol:You had your chance on the last one:twisted:

Got my axles and starting to figure out how I am going to link everything together. I decided to use 3/8" delrin for all my links and 3/16" for the front tie rod and steering arm. I will be using TLT suspention stays mounted on the back side of the axles for lower link and shock mounts. Next is tring to figure out how to make the rear a straight locked axle.

http://img508.imageshack.us/img508/9...1079ap8.th.jpg

http://img210.imageshack.us/img210/7...1080fr2.th.jpg

http://img210.imageshack.us/img210/1...1081go6.th.jpg

http://img210.imageshack.us/img210/4...1082mj0.th.jpg

Done yet? ;-)

Looks good. Started painting the body yet? What color is it going to be? :lol:

Best post of 2008!