Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Superclass Crawlers > Tamiya Txt-1 and Juggernaut
Loading

Notices

Thread: BEST IDEA EVER!!!!LOOK HERE!!!!

Reply
 
LinkBack Thread Tools Display Modes
Old 10-19-2004, 06:14 PM   #1
Quarry Creeper
 
Join Date: Oct 2004
Location: Canada eh!
Posts: 240
Default BEST IDEA EVER!!!!LOOK HERE!!!!

I noticed some of u guys screwing around with the batt in the front, cant you just change the wiring on the motors, put the servo in the rear and your set? will this work or has someone tried and it doesnt? i would try it right now but my trucks aprart to lock the diffs! so let me know asap!!!! or just rotate to tranny 180 and put servo in back? but just change wires ( evern easyer right???)

so let me know if this will work with moving servo and fliping wires!!
thanks!
airranger is offline   Reply With Quote
Sponsored Links
Old 10-19-2004, 06:34 PM   #2
Pebble Pounder
 
Join Date: Aug 2004
Location: orange county n.y. , building the hydro crawler
Posts: 195
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

can you exlain more its rather confusing :?
sambmx is offline   Reply With Quote
Old 10-19-2004, 06:37 PM   #3
Rock Crawler
 
Join Date: Jul 2004
Location: Mt.View CA
Posts: 940
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

Quote:
Originally Posted by airranger
I noticed some of u guys screwing around with the batt in the front, cant you just change the wiring on the motors, put the servo in the rear and your set? will this work or has someone tried and it doesnt? i would try it right now but my trucks aprart to lock the diffs! so let me know asap!!!! or just rotate to tranny 180 and put servo in back? but just change wires ( evern easyer right???)

so let me know if this will work with moving servo and fliping wires!!
thanks!
thats what every is doing
bigred is offline   Reply With Quote
Old 10-19-2004, 07:33 PM   #4
Diggin' the new SCX10 II!
 
badger's Avatar
 
Join Date: Mar 2004
Location: Norcal
Posts: 11,402
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

You are better off not reversing the wires on the motor if the motor has advanced timing. This will cause the motor to draw more amps which will generate more heat and decrease your run times.

If you have a motor with 0 degrees of timing then you can reverse the motors without any negative affect.

If you install a mammoth gear reduction then you can put your battery in the front and your motor in the rear and you can leave your motor wired normally. The Mammoth gear reduction will reverse the rotation for you. This is the way my setup is.
badger is offline   Reply With Quote
Old 10-19-2004, 08:51 PM   #5
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

Like Badger said, the timing won't be right, and cause undo heat.
So, I bought a reverse Mag Meyhem motor and really just drove the truck backwards.
Well, until I got a GD-600 gear reduction. Then I went back to a 540 motor.
Well, until I mounted my batteries elsewhere...hehe. Which I'll post about...
Sounds like you're still using the 3 step mechanical speed control?
EeePee is offline   Reply With Quote
Old 10-19-2004, 10:44 PM   #6
Quarry Creeper
 
Join Date: May 2004
Location: Neosho
Posts: 301
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

OK - Badger I gots a bone to pick with you. - remember the "mammoth gearbox Q's" post of mine? - well I finally figured out why I wasnt understanding you --

badger wrote:
No the mammoth does not reverse anything which is nice when if you need to run a motor with adv. timing.

Just get a normal rotation motor.


But now you say --

badger wrote:

If you install a mammoth gear reduction then you can put your battery in the front and your motor in the rear and you can leave your motor wired normally. The Mammoth gear reduction will reverse the rotation for you. This is the way my setup is.


So which one is it?
_________________
jeep_boy02 is offline   Reply With Quote
Old 10-19-2004, 11:20 PM   #7
Diggin' the new SCX10 II!
 
badger's Avatar
 
Join Date: Mar 2004
Location: Norcal
Posts: 11,402
Default Re: BEST IDEA EVER!!!!LOOK HERE!!!!

Quote:
Originally Posted by jeep_boy02
OK - Badger I gots a bone to pick with you. - remember the "mammoth gearbox Q's" post of mine? - well I finally figured out why I wasnt understanding you --

badger wrote:
No the mammoth does not reverse anything which is nice when if you need to run a motor with adv. timing.

Just get a normal rotation motor.


But now you say --

badger wrote:

If you install a mammoth gear reduction then you can put your battery in the front and your motor in the rear and you can leave your motor wired normally. The Mammoth gear reduction will reverse the rotation for you. This is the way my setup is.


So which one is it?
_________________
Sorry Jeep_boy02, you are absolutly correct. I was incorrect in the thread "mammoth gearbox Q's" and Kona_joe corrected me later on in the posts. I forgot to go back and change my post so this does not happen.

I did change my post in the other thread to reflect the correct info in this thread.

Bottom line is: the Mammoth does reverse the rotation so depending on where you mount your motor in the chassis (front or back) you will want to buy a reverse rotation (front) or a normal rotation (rear) motor.

Sorry about the confusion.
badger is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com