RCCrawler Forums

TwistedXT · 03-20-2006, 12:34 PM

sweet setup

i bet if you put some part kits together, a bunch of guys would buy em!!! Me included! make some extra money, then buy more cool stuff

hvydty1 · 03-20-2006, 12:36 PM

Sweet! Just wondering what your 40 tooth was origionally. Is it a Tamiya gear? How were you able to connect the shafts to it? Take it that the 12 tooth is a standard pinion gearwith an enlarged shaft hole size. Genius!!!!

rerock · 03-20-2006, 12:52 PM

I will be looking into this mod further. It gives me ideas for light weight tranny alternatives...

EGRESSor · 03-21-2006, 05:29 AM

Quote:

Originally Posted by TwistedXT

sweet setup

i bet if you put some part kits together, a bunch of guys would buy em!!! Me included! make some extra money, then buy more cool stuff

you mean the gears ?
i will check the costs and let you know

rerock · 03-21-2006, 06:38 AM

Heck yeah the gears! Can you provide P/N#'s for which parts you used? That's what everyone has been asking for! This is a great step forward for shafty's if you can tell us what you used. We can look at your pics and figure out how you modified them, but we need to know which gears you used.

EGRESSor · 03-21-2006, 07:15 AM

Quote:

Originally Posted by rerock

Heck yeah the gears! Can you provide P/N#'s for which parts you used? That's what everyone has been asking for! This is a great step forward for shafty's if you can tell us what you used. We can look at your pics and figure out how you modified them, but we need to know which gears you used.

as here

Quote:

Originally Posted by EGRESSor

i use a 12t pinion and a 40t gear modul1

bought the gears here
www.conrad.de
#240311 and
#237370

modify the pinion like this

and make a hollow shaft

grind the inside of the axle housings to fit the bigger 40t gear , a dynafile works great

rerock · 03-21-2006, 07:47 AM

Thank you! That is exactly what I (we) are looking for!!!! Nice diagrams!

BARK · 04-02-2006, 06:50 PM

Can anyone translate the linked page and place an order in the U.S. ?

TLTCrawlin · 04-06-2006, 12:39 AM

Looks sick, Good job. :P

www.freetranslations.com and do it yourself im too lazy to do someone elses lazy work.

EGRESSor · 04-08-2006, 01:38 AM

in action Jugg2.2 clips

Jackyl · 04-20-2006, 11:37 PM

Anything knew about these gear sets? Are the kits available yet ?

EGRESSor · 04-21-2006, 12:17 AM

still in progress

i will let you know when they are ready

rerock · 04-21-2006, 09:43 AM

I think I'll be picking up a set if you do a kit form. You might make a couple dollars... Just be sure to buy a star if you haven't already done so if you sell stuff. Don't want to get in trouble.

Zero · 04-21-2006, 05:35 PM

Whoa, wait, I must have missed the part where these are going to be available! Sign me up to that list, if there is one!

supercrawlerfreak · 04-29-2006, 11:40 PM

It wont let me translate it

EGRESSor · 06-17-2006, 02:05 PM

now some sets ready

how to use http://www.photobox.co.uk/album/3252964

do you think it is realizable for the average rc user to build the gears in ? ;)

coolhandcountry · 01-26-2007, 03:30 PM

Is there any update on this gear mod? Has many tried this and how did it turn out?

Could some one update the pics or give new links?

Brainstain · 01-26-2007, 03:42 PM

I tried searching the part number through the page and had no luck. :(

EeePee · 01-26-2007, 04:03 PM

I have em, but I'm seriously dragging my feet installing them.

Sparky J · 01-26-2007, 04:20 PM

I run them in my 14'er and they make a sick difference. The hardest part is having to trim the housings to fit.

06-17-2006, 02:05 PM	#36
EGRESSor RCC Addict Join Date: Jan 2005 Location: Germany north Posts: 1,669	now some sets ready how to use http://www.photobox.co.uk/album/3252964 do you think it is realizable for the average rc user to build the gears in ? ;) Last edited by EGRESSor; 06-17-2006 at 03:45 PM.

01-26-2007, 03:30 PM	#37
coolhandcountry Newbie Join Date: Jan 2007 Location: Woodford va usa Posts: 30	Is there any update on this gear mod? Has many tried this and how did it turn out? Could some one update the pics or give new links? Last edited by coolhandcountry; 01-26-2007 at 04:03 PM.

01-26-2007, 04:03 PM	#39
EeePee MODERATOR™ Join Date: Jul 2004 Location: Ohio Posts: 18,928	I have em, but I'm seriously dragging my feet installing them. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2006, 12:34 PM	#21
TwistedXT Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado Posts: 3,622	sweet setup i bet if you put some part kits together, a bunch of guys would buy em!!! Me included! make some extra money, then buy more cool stuff

03-20-2006, 12:36 PM	#22
hvydty1 Quarry Creeper Join Date: Feb 2006 Location: Angier N.C. Posts: 387	Sweet! Just wondering what your 40 tooth was origionally. Is it a Tamiya gear? How were you able to connect the shafts to it? Take it that the 12 tooth is a standard pinion gearwith an enlarged shaft hole size. Genius!!!!

03-20-2006, 12:52 PM	#23
rerock Quarry Creeper Join Date: Sep 2005 Location: Minneapolis Posts: 440	I will be looking into this mod further. It gives me ideas for light weight tranny alternatives...

03-21-2006, 06:38 AM	#25
rerock Quarry Creeper Join Date: Sep 2005 Location: Minneapolis Posts: 440	Heck yeah the gears! Can you provide P/N#'s for which parts you used? That's what everyone has been asking for! This is a great step forward for shafty's if you can tell us what you used. We can look at your pics and figure out how you modified them, but we need to know which gears you used.

03-21-2006, 07:47 AM	#27
rerock Quarry Creeper Join Date: Sep 2005 Location: Minneapolis Posts: 440	Thank you! That is exactly what I (we) are looking for!!!! Nice diagrams!

04-02-2006, 06:50 PM	#28
BARK Quarry Creeper Join Date: Apr 2004 Location: Louisiana Posts: 327	Can anyone translate the linked page and place an order in the U.S. ?

04-06-2006, 12:39 AM	#29
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	Looks sick, Good job. :P www.freetranslations.com and do it yourself im too lazy to do someone elses lazy work.

04-08-2006, 01:38 AM	#30
EGRESSor RCC Addict Join Date: Jan 2005 Location: Germany north Posts: 1,669	in action Jugg2.2 clips

04-20-2006, 11:37 PM	#31
Jackyl Rock Stacker Join Date: Feb 2006 Location: West Bend, Wisconsin Posts: 84	Anything knew about these gear sets? Are the kits available yet ?

04-21-2006, 12:17 AM	#32
EGRESSor RCC Addict Join Date: Jan 2005 Location: Germany north Posts: 1,669	still in progress i will let you know when they are ready

Sponsored Links

04-21-2006, 09:43 AM	#33
rerock Quarry Creeper Join Date: Sep 2005 Location: Minneapolis Posts: 440	I think I'll be picking up a set if you do a kit form. You might make a couple dollars... Just be sure to buy a star if you haven't already done so if you sell stuff. Don't want to get in trouble.

04-21-2006, 05:35 PM	#34
Zero Newbie Join Date: May 2005 Location: P-land Posts: 48	Whoa, wait, I must have missed the part where these are going to be available! Sign me up to that list, if there is one!

04-29-2006, 11:40 PM	#35
supercrawlerfreak Rock Crawler Join Date: Mar 2005 Location: Murrieta Posts: 806	It wont let me translate it

01-26-2007, 03:42 PM	#38
Brainstain Nope.. Join Date: Aug 2005 Location: Whiteland, Indiana Posts: 1,849	I tried searching the part number through the page and had no luck. :(

01-26-2007, 04:20 PM	#40
Sparky J RCC Addict Join Date: Mar 2005 Location: DODGING ROCK CHUCKERS Posts: 1,137	I run them in my 14'er and they make a sick difference. The hardest part is having to trim the housings to fit.

RCCrawler Forums

Thread: 1:4 gear ratio Jugg axle