Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Superclass Crawlers > Tamiya Txt-1 and Juggernaut
Loading

Notices

Thread: Beefed Steering Linkage and Rear Lockout

Reply
 
LinkBack Thread Tools Display Modes
Old 10-28-2004, 06:21 PM   #1
Quarry Creeper
 
Join Date: Sep 2004
Location: St.Louis, MO.
Posts: 369
Default Beefed Steering Linkage and Rear Lockout

Hello all
Finally had it with the stock weenie linkage that comes with the TXT. Replaced them with .250 aluminum. Dead headed 6/32 x3/4 set screws in the links then attached the rod ends. This gave .375 screw in the link and the same in the rod end, plenty beefy. Also added a ball stud to one of the rear upper blocks for the rear steer lockout. While it was all apart also added a drilled/tapped hole for another ball stud on each upper block. This was suggested by Grizzly to allow placement of lower links above the axle to gain clearence. Have seen this done on quite a few TXT's lately as well as the scratch built crawlers. May experiment with that later. Figured out skids might be a nice addition too since my pretty steering linkages got munched while running the proving grounds :( My neighbor is moving and he had all sorts of nice size rocks over there. Asked if I could have a few and ended up draqging a pretty good pile over to my backyard. Just sort of threw them to the ground, will rearrange later for a crawling course to try out new parts on. Pics attached for your viewing pleasure.


RCALLOYS is offline   Reply With Quote
Sponsored Links
Old 10-28-2004, 09:03 PM   #2
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Default Re: Beefed Steering Linkage and Rear Lockout

Ya know, I remember when you got that TXT...

"What the hell am I going to do with this?"

he-he.
JasonInAugusta is offline   Reply With Quote
Old 10-28-2004, 10:06 PM   #3
Quarry Creeper
 
Join Date: Sep 2004
Location: St.Louis, MO.
Posts: 369
Default Re: Beefed Steering Linkage and Rear Lockout

Ya got me thinking Jason, I had to look back in my files and see when I got this TXT. Was January 5th of this year Sheesh, after all these months I finally get around to modding it. Seems this rock crawling stuff is taking off quite well. Currently researching servo options. Perhaps you can enlighten me on this hydraulic steering set up eh?
RCALLOYS is offline   Reply With Quote
Old 10-28-2004, 10:17 PM   #4
06 Super National Champ
 
JasonInAugusta's Avatar
 
Join Date: Jun 2004
Location: Stark Industries Bar and Grill
Posts: 11,361
Default Re: Beefed Steering Linkage and Rear Lockout

http://www.projecttwin.com/Scorpion_...awler_5081.cfm
JasonInAugusta is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com