RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Tamiya Txt-1 and Juggernaut (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/)
-   -   Man Im havin tough time searchin, please help/ (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/269999-man-im-havin-tough-time-searchin-please-help.html)

Mighty1 09-14-2010 04:57 PM

Man Im havin tough time searchin, please help/
 
Can I get 17mm hub adapters for txt axles so I can use my axial rocksters? And where? Thanks, I owe you one. I might be a tamiya owner soon!

Grizzly4x4 09-14-2010 05:21 PM

These are wide, but may be right with the Axial wheels.
http://www.tcscrawlers.com/Integy-17...N-p-16650.html

or

http://www.tcscrawlers.com/Hot-Racin...6-p-16819.html

Your track width will be very narrow with these.
http://www.tcscrawlers.com/RC4WD-17m...1-p-16687.html

Mighty1 09-14-2010 06:18 PM

Thanks man. How much more narrow you wreckon? Im going to own a txt even if i have to buy a new one.

CraZySteve 12-20-2010 08:26 AM

Quote:

Originally Posted by scriner (Post 2636018)
Can I get 17mm hub adapters for txt axles so I can use my axial rocksters? And where? Thanks, I owe you one. I might be a tamiya owner soon!

Grizzly got it right - but you also have a few more options as I am in the same situation as you and been doing my homework (finally it only took me 30 years to start doing homework :lmao:) I have a TXT-1 that I am putting Axial Oversized Beadlock wheels on.. I REALLY wish Bender Customs 17mm Delrin Adapters where still available.. but they are not :cry:
http://www.rccrawler.com/forum/showp...07&postcount=1


RCP 12mm-17mm adapters - The description specifically states " Use this adapter with stock clod hexes, and Axial Racing beadlock wheels on clod axles" (no picture on website - but I emailed them so details soon to follow )

http://rcpcrawlers.com/product.php?p...2&cat=0&page=1

New Era Models 12mm-17mm Machined aluminum Adapters
For TXT-1 (probably due to longer stub shaft)
http://www.neweramodels.com/item.cgi?part_id=8467

For Clod - These are a better deal as they come with a machined bushing and the 4mm Lock nuts for $33!
http://www.neweramodels.com/item.cgi...=&part_id=9488


Since I live in Northern Massachusetts and New Era models is literally "on the way home from work" I am going to stop in one night with my Truck and Axial Wheels and see how their adapters work out - In depth report to follow "thumbsup"

-CS-


All times are GMT -6. The time now is 09:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com