Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Superclass Crawlers > Tamiya Txt-1 and Juggernaut
Loading

Notices

Thread: Revo shafts

Reply
 
LinkBack Thread Tools Display Modes
Old 12-21-2004, 06:35 AM   #1
Quarry Creeper
 
Join Date: Sep 2004
Location: On my acre and a half of Gods Country. Prosper, TX
Posts: 347
Default Revo shafts

I want to lengthen the links on my new TXT this weekend or next week. I saw something about using the Revo shafts when this is done, but somewhere I thought I saw something about using the Revo axle shafts, not the driveshafts.

Does anyone have any info on this? and if you have the part #'s that would be even better.

Mark
T-Man is offline   Reply With Quote
Sponsored Links
Old 12-21-2004, 08:56 AM   #2
Diggin' the new SCX10 II!
 
badger's Avatar
 
Join Date: Mar 2004
Location: Norcal
Posts: 11,402
Default Re: Revo shafts

Here you go T-man. All the info you want on Revo's.

http://www.rccrawler.com/postt2497.html
badger is offline   Reply With Quote
Old 12-21-2004, 10:14 AM   #3
Quarry Creeper
 
Join Date: Sep 2004
Location: On my acre and a half of Gods Country. Prosper, TX
Posts: 347
Default Re: Revo shafts

Thanks Badger.

Is all I need the " 5451 --- Traxxas Drive Shaft Assy Revo " ?

That is all I see in the link, but I was also told that I might need all these other parts.

5450 - get 1 pkg ---- Traxxas Half Shaft Set L&R Revo ---
5452 - get 1 pkg ---- Traxxas U-Joints Drive Shaft Revo ---
5455 - get 2 pkgs ---- Traxxas Center Front and rear half shafts Revo ---
T-Man is offline   Reply With Quote
Old 12-21-2004, 10:25 AM   #4
I wanna be Dave
 
Join Date: Jun 2004
Location: San Jose
Posts: 5,207
Default Re: Revo shafts

yep thats it. you can the parts seperately with those other #'s or complete with the #5451. just remove the pin the holds the steel stub axle in and pull the stub out. then use that yoke on your tranny with the mod Badger did.

its pretty easy as long as your WB is long enough.
rckjeep is offline   Reply With Quote
Old 12-21-2004, 11:42 AM   #5
Quarry Creeper
 
Join Date: Sep 2004
Location: On my acre and a half of Gods Country. Prosper, TX
Posts: 347
Default Re: Revo shafts

I just ordered 2 packages of 5451 for $7 a piece.

I looked at the description of each while at the LHS and found out that 5451 was the complete set-up, and the others were all pieces.

BTW, these are Axle shafts, not the drive shafts. That was one of the questions I had.
T-Man is offline   Reply With Quote
Old 12-21-2004, 11:57 AM   #6
Rock Crawler
 
Join Date: May 2004
Location: DFW, Texas
Posts: 662
Default Re: Revo shafts

P/N 5451 comes with these yokes
Here's a pic of the completed driveshafts.



This is a close up of the yoke INCLUDED with P/N 5451
It works with a TXT tranny from what I understand



The OTHER yoke is P/N 5458. Here's a pic
It works with a emaxx tranny b/c that is what I used.



Hope this clarifies things.
cman_1500w is offline   Reply With Quote
Old 12-21-2004, 01:32 PM   #7
I wanna be Dave
 
Join Date: Jun 2004
Location: San Jose
Posts: 5,207
Default Re: Revo shafts

Quote:
Originally Posted by cman_1500w
P/N 5451 comes with these yokes
Here's a pic of the completed driveshafts.



This is a close up of the yoke INCLUDED with P/N 5451
It works with a TXT tranny from what I understand



The OTHER yoke is P/N 5458. Here's a pic
It works with a emaxx tranny b/c that is what I used.



Hope this clarifies things.
Did you make any mods to fit the emaxx. I haven't been able to get them to fit without modding.
rckjeep is offline   Reply With Quote
Old 12-21-2004, 09:44 PM   #8
Rock Crawler
 
Join Date: May 2004
Location: DFW, Texas
Posts: 662
Default Re: Revo shafts

rckjeep, I had to drill the yoke to the size of the tranny's output and grind the end down flat. Takes 2minutes tops.
cman_1500w is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com