| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
10-04-2006, 05:36 PM
| #1 |
| Newbie Join Date: Jan 2006 Location: canada
Posts: 6
|  Emaxx Tranny VS TXT Tranny w/ gd600
hey guys i was wondering is a 55 turn lathe motor [ 9 tooth pinion] and 72 tooth spur gear on the emaxx tranny better than a gd600 on the stock txt tranny. Also I have 2 esc a super rooster and a rooster which one is better for a emaxx tranny set up I'm also using gp3300 matched batteries.THX FOR ANY REPLIES
Last edited by ROCKSTEADY; 10-04-2006 at 05:42 PM. |
|  |
| Sponsored Links | |
| | |
|
10-04-2006, 06:16 PM
| #2 |
| Rock Crawler Join Date: Jul 2004 Location: Salt Lake
Posts: 684
|
If your using larger tires, you'll need the GD on the maxx tranny with the GD. I like the maxx tranny becuase of the durability, however, the TXT tranny is smaller and just as durable.
|
|
| |
|
10-04-2006, 06:41 PM
| #3 |
| MODERHATER™   Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
I run a maxx tranny in mine w/ a gd, and a 55turn. I tried it w/out the gd and it stalled alot, then i tried w/ a silver can and a gd, a little better but still stalled in 1st gear, now even w/ the lathe and the gd it stalls when bound, although once i broke both rear shafts at the same time!
|
|
| |
|
10-04-2006, 08:28 PM
| #4 |
| Newbie Join Date: Jan 2006 Location: canada
Posts: 6
|
THX THE INFO >what if i used 2 lathe motors or MM in series on the emaxx tranny would i still need a gear reducer?
Last edited by ROCKSTEADY; 10-04-2006 at 08:31 PM. |
|
| |
|
| |
Linear Mode
