RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Tamiya Txt-1 and Juggernaut (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/)
-   -   TxT-1 Juggernaut Gallery (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/5661-txt-1-juggernaut-gallery.html)

CaptainSafety 02-11-2005 09:36 PM

TxT-1 Juggernaut Gallery
 
i know this has been done before but i've only seen 1 or 2 posts in all those threads. Lets try and get everybodys, truck conglomerated here. Post mods, electronics, anything you think is relavent.

*************************
EDIED BY BADGER:
Lets keep this thread for details and pics of your rigs only NO CHATTING. There are plenty of other forums/threads to get your chatting fix in.

*************************

i'll start

TXT-1
Super-rooster
stock motors ( gd-600 and 9 tooth pins in mail)
Futaba radio, receiver, and one servo
Hitec servo
Servo mounts coming soon
Cut Chassis
Relocated trans
narrowed stock wheels with stock tires
Wheelbase approx 15.5

http://captainsafetyman.com/Pictures/txt/IMG_1981.jpg
http://captainsafetyman.com/Pictures/txt/IMG_1980.jpg

rckjeep 02-12-2005 12:46 AM

Here's my TXT

Cut chassis & trans
15 3/4" WB
GD600 @ 2.5 : 1 & 9t
INTEGY MSR4 Shocks (no Canti's)
cut BFT's on narrowed TXT wheels
and the usual locked diffs, traditional steering yada yada yada

http://www.nor-calrcrc.com/albums/em...8744.sized.jpg

BENDER 02-12-2005 03:26 AM

3 Attachment(s)
ROCTAPUS the Clod killing TXT. :-P

WHEEL BASE-16 3/4"
TIRE DIAMETER-7"
WIDTH-15 1/4"
DIFF. CLEAR.-2 1/8"
TRANNY CLEAR-4 1/4"
TOP OF FRAME-7 3/4"
TOP OF BODY-9 5/8"
WEIGHT-9 3/4 LBS.

The rest of the stats are in the sig.

EeePee 02-13-2005 11:02 AM

TXT
Hacked it, links flipped top to bottom
T-Maxx driveshafts all twisted up
Either a reverse Mag Mayhem or stock can on a GD-600 @ 2.5 with a 15 tooth inside
Stock shocks, no springs, 80 wt oil
Maximizer beadlocks with Ace's adapters
Retarded narrowed and hacked stock tires that keep it entertaining by sucking
TQ3 radio with Futaba 3305 servo (front steer only)
Super Chicken

http://img182.exs.cx/img182/4919/img03454vb.jpg

That's my indoor rock pile. Who needs a dining room?

Mazlem 02-13-2005 11:29 AM

Here's mine:

Powered by Johnson 550 motor w/ 9T
BFT's on Maximizer beadlocks
16" Wheelbase w/ re-located links and Revo driveshafts
Cut chassis / tranny w/ 4.5" clearance
Servo mounts from 1beatjeep, locked diffs, battery moved, etc

TO DO: Mammoth gear reduction and rear steering

Tree Crawlin' Pic

http://i222.photobucket.com/albums/d...ler/Bigger.jpg

EeePee 02-14-2005 09:29 PM

New look for me.
LSTs on Maximizers.
And a Proline Toyota Land Cruiser body that needs some serious trimming, and lowering.

http://img171.exs.cx/img171/9615/yellah5of.jpg

http://img171.exs.cx/img171/9400/yellah26on.jpg

braceysdad 02-17-2005 09:42 AM

TXT boyer chassis
revo shafts
emaxx tranny
55t motor on gd600
lst tires
15.5" wb



http://img197.exs.cx/img197/157/boyers310bw.th.jpg

stlcrawler 02-17-2005 11:14 PM

Limestone cowboy specs

TXT-1
Hacked frame
Relocated trans.
Lincoln locked diffs
Savage shocks
Revo drive shafts
Moab tires on Outback rims
Twin 55t lathe motors in series with 13t pinions
Super rooster
Single 645mg servo
JR python radio
Steel skid plate (new addition)

Trans clearence 4.5"
Axle Clearence 2.625"
WB 15"
Track (outsice to outside) 14.5"
Top of frame 7.75"
Top of shock tower 10.0"
Top of body 10.2"
All the photoos you could ever want
http://pg.photos.yahoo.com/ph/neonrcr97/my_photos

DirkDigler 02-18-2005 12:04 PM

What classifies the rig a TXT?
I still have a TXT chasis and tranny. Good enough?

TXT chasis modified
TXT tranny
Orion motor(GD600 awaiting install)
XFactor axles
modified Revo shafts
Narrowed Kongs
Custom bead rings
Savage Stubbies
Custom steering
645's
Shaved diffs(more clearance than Twin force axles)
polished Xfactor shocks
custom links 17.5 inch wheel base
Sooper Rooster
etc, etc, etc

http://img193.exs.cx/img193/4499/dsc036564su.th.jpg

CSR 02-20-2005 02:08 PM

Here's mine:

http://pics.montypics.com/csr/2005-0...6_may04_05.jpg

Check signature line for specs ;)

hotrod 03-09-2005 08:19 PM

4 Attachment(s)
ok heres my 2 crawlers:

ones a txt wid all the mods:
GD600
15 3/4 " wb
batteries up front
tranny turned around
super rooster esc
4 ws
and all the rest of the stuff


now the other is a full custom made from a bowlink legends car chasis wid clod axels , maxx shocks , custom carbon links , and all that other important sruff.

dynamaxxed 03-16-2005 12:55 AM

couldnt get pic to come up, but its at this site

http://www.streetsourcemag.com/uploa...733PM40401.jpg

azvader 04-27-2005 10:54 PM

Jugger 2
 
Here's my Jugg 2 or what's left. I fabbed the chassis, links, mounts, and gear drive.

http://i4.photobucket.com/albums/y13...r/IMG_2529.jpg
http://i4.photobucket.com/albums/y13...r/IMG_2700.jpg

16" wb 15 3/4"track 4 7/8" gc
8 3/4" top of trans 10 3/4" top of body

G-10 and aluminium 4-link chassis
Chopped and dropped Jugg 2 trans w/TXT output
Axle mounted Super Rooster and 6-cell 3600 mah battery
Lathe motor w/2.44:1 gear drive
Jugg 2 axles w/TXT outputs, alloy knuckles, TTRs, and Revos
Moabs on narrowed Outbacks w/weights wo/foams
3PDF w/5645MGs and independent rear steering
MRS4 piggybacks

jeep_boy02 05-05-2005 01:18 PM

Here is mine. I posted a long time ago before the new board so just thought I would put some more up.

http://img159.imageshack.us/img159/8517/30087bt.jpg

http://img159.imageshack.us/img159/3982/30091li.jpg

broncotxt 05-15-2005 07:15 PM

Heres mine

Truck Base :TXT

ESC:Supa roosta

Motor(s):lathe

Servo(s):hitec HS645MG

Trans:txt GD 600 at 85:1

Axles:txt j/b welded

Tires:stock

WB:15"

Overall Width:14"

Diff clearance:2.5"

Center Chassis clearance:4.5"

Overall height:9.5"

http://img221.imageshack.us/img221/6...atxt0076zg.jpg

Train Of Thought 06-06-2005 11:58 PM

Standard hack and bash TXT-1. I've had this thing since before you could buy them in the US, but only recently did much to it. You can see my original work here:
http://www.theshreves.com/rc_stuff/txt-1/

So I found this website/forum and did some reading and monkey-see-monkey-do type stuff. Right now I am trying to narrow up a set of Jumbo Kongs. WannaBeDigler, WTF method did you use? I am getting through it, but jeeeeez...

Anyways, here you go:

http://pics.theshreves.com/rc/txt1lapine060505f.jpg

http://pics.theshreves.com/rc/txt1lapine060505c.jpg

Some more recent ones:
PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9

WRMorrison 06-07-2005 06:01 AM

2 Attachment(s)
Here's mine, better pics will be added/swapped later...

Chassis: TXT (REALLY hacked, soon to be replaced with custom plates)
Axles: TXT (of course) locked with hot glue
Tranny: TXT, bottom mounts shaved off, left-side motor location removed, layed down on its side, GD-600
Motor: Integy 55T, 21T on the motor, 18T on the GD
Shocks: TMaxx, top of cap cut off, drilled, maxx rod end attached to cap
WB: about 15.25 at the moment, will be extended to 16" shortly
Links: custom link/shock mounts inside the axle, allowing for battery placement on top of the axle tube
Elec: SR, Airtronics VG6000, 6cell GP3300's
Wheels/Tires: Custom aluminum wheels with Heydco adaptors/ cut and sanded K-Rocks (newer compound)
Servos: HSC-5998TG's, 250 oz.in. torque!
Body: stock TXT, chopped up, shortened bed, antenna stitched in the bed

TwistedXT 06-07-2005 11:21 AM

Heres Some Pics of TwistedXT
http://img278.echo.cx/img278/3723/ad3c3rh.jpg

http://img278.echo.cx/img278/9892/53598pn.jpg

http://img212.echo.cx/img212/369/13570ub.jpg

http://img212.echo.cx/img212/8681/49d84bx.jpg

http://img212.echo.cx/img212/8463/31d15ee.jpg

http://img212.echo.cx/img212/2862/9c7e9gi.jpg

http://img212.echo.cx/img212/5098/7ce08mt.jpg

http://img212.echo.cx/img212/7668/6da97nw.jpg

http://img74.echo.cx/img74/6614/4d3d7ky.jpg

http://img71.echo.cx/img71/7568/dcp06281du.jpg

http://img99.echo.cx/img99/2488/dcp06272cr.jpg

http://img46.echo.cx/img46/9430/43d4.jpg

braceysdad 06-08-2005 03:38 PM

his pix


http://img8.echo.cx/img8/5451/his16dg.th.jpg

http://img8.echo.cx/img8/1581/his21up.th.jpg

http://img8.echo.cx/img8/8117/his37zk.th.jpg

DSpy 06-12-2005 06:35 AM

My TXT Pics n Vids
 
Vids

Pics

Files are big, thus the links instead.
Cheers.


All times are GMT -6. The time now is 07:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com