06-02-2020, 01:12 PM | #1 |
Newbie Join Date: Nov 2018 Location: LA
Posts: 3
| Greetings!
Hello fellow RC enthusiasts, greetings from southern California! I have a few RC projects on the shelf and one in particular has started staring at me lately, mainly because everytime I try to climb a rock either a stearing rod pops off, suspension link fails, or the drive axle slips...TXT-1.../sigh. Lotsa research and time thinking about it has me braking down and Modding my ride, still not ready and have a question I have not seen answered. Almost done (right) with most of the mods, just have to move the servos me thinks. I know alot ditch the cantilevers and move the shock mounts to the axles, but what if you replace the rod with another shock. What I did was use the stock shocks I had replaced and mounted them to the axle brace next to the lower link mounts. So basically it just looks cool ;) Has anyone ever tried this or is this just a silly venture of a man with too much time on his hands? Pics: https://photos.google.com/share/AF1Q...p3Vk5GYUdHM2pB https://photos.google.com/share/AF1Q...cyT21UN3V5NERn https://photos.google.com/share/AF1Q...lvajI4X093SDhB Thank you for the thoughts Newb Last edited by Pheadrus; 06-02-2020 at 03:12 PM. Reason: Added pics me thinks |
Sponsored Links | |
07-03-2020, 02:22 PM | #2 |
Newbie Join Date: Nov 2018 Location: LA
Posts: 3
| Update...
Update for you crawlers out there, I have gone with more of a traditional setup, the 8 shock system was way too loosey goosey. Got the drive shafts all mounted up, went with the rc4wd punisher II the 150+mm was perfect, just had to bore the holes out 1mm to fit up. Next up is fabricating the skid place, going to try and re-purpose all the cut parts off the chassis to make mounts and for the servos as well. It's doing fairly well so far me thinks, have a multilayer flower garden to crawl around in. Needs a skid plate for sure. Okie Dokie, will keep you posted on updates... |
07-14-2020, 01:32 AM | #3 |
Newbie Join Date: Nov 2018 Location: LA
Posts: 3
| Meh...
Update take 2, got the skid plate all mounted up and picked up that extremerc servo mount kit and am kinda bummed. Best I could do mounting the servo up is save about 1/2 inch really. It mounts onto the axle brace mounts unlike the one in the sticky whick looks to save at least an inch. Think it's a runner now though, it was a brand new kit so am just gonna use the stock motors for now, will upgrade to hand turned and a gd600 when those burn out. Other than that, will post a couple new pics and hopefully someone can chime in with some feedback on things I can do better. Stay Safe... https://photos.app.goo.gl/dvuNxEWqmYc3zvQX8 https://photos.app.goo.gl/8jRmNKiYxGPZmgbHA |
07-31-2020, 07:56 PM | #4 |
Pebble Pounder Join Date: Jun 2009 Location: Hudson, NH
Posts: 100
| Re: Greetings!
Nice - I still have a TXT-1 that I turned into a crawler.. Main mods are Revo Shafts, 4:1 Axles, ThunderTech CVD axles. I am always modifying it...
|
10-28-2020, 08:42 PM | #5 |
Rock Stacker Join Date: Oct 2007 Location: On the edge of sanity...
Posts: 60
| Re: Greetings!
Nice stuff! I also have one, older version, has Tamiya after market blue frame and TTR Emaxx 2-speed transmission. Slow first gear to crawl and zippy second gear for bashing. Sad, sits on the shelf now. Have fun!
|
| |