|
| LinkBack | Thread Tools | Display Modes |
05-08-2007, 02:17 PM | #21 |
I wanna be Dave Join Date: Feb 2006 Location: Campbell, CA 4 hrs 2Rubicon !
Posts: 2,044
|
Awseome ! show us the frame and links ! Last edited by toy4crawlin; 05-09-2007 at 03:49 PM. |
Sponsored Links | |
05-08-2007, 03:48 PM | #22 |
MODERHATER™ Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
Looks like your screwing around to me! TXT axles? 2.2 comp? Bumpers? Last edited by 666; 05-08-2007 at 03:52 PM. |
05-08-2007, 04:31 PM | #23 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
| |
05-15-2007, 12:58 PM | #24 |
MODERHATER™ Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
Still screwing around?
|
05-17-2007, 08:51 PM | #25 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
| Yup... some of you may have seen this type of design before... look familiar? a little bit of hard gasket maker to help keep everything in place... gears engaged Dig engaged i put the hole under the main shaft and re-enforced the shaft with a piece of brake line... after reading the review of this mod i noticed how the hole was starting to ream out. this should help work against that. Now i just have to work on the servo mount. among other things.... and yes.. those are bushings... unlike bearings... bushings are pretty much bomb proof. in fact, the older they get, the better they work. (stealing thought from JIA from one of his RcDriver articles..... i think... i dont know - i read it somewhere and it made perfect sense.) Last edited by TwistedXT; 05-17-2007 at 09:10 PM. |
05-18-2007, 12:00 PM | #26 | |
Quarry Creeper Join Date: Nov 2005 Location: LBC
Posts: 370
| Quote:
I dig that wheelbase jig. I need to set something up like that! | |
03-25-2008, 09:34 PM | #27 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
|
so heres a project that fell along the wayside... heres whats taken place since those pics.. got her done.. torsion drove like crap... took it apart and chopped up the stock TXT chassis, added a crowd pleazer body, Cut and shut Losi Zombie Maxx Tires with Proline Masher 2K Sidewalls... Hitec 5645 servo, rear dig is still in the works.. just gotta figure how to mount the servo... i may have to build a whole new rear bracket. CEN racing shocks... springs are a little too hard.. need to swap em out.. custom axle mounted battery pack, Traxxas XL-5 Esc, Integy 45 Turn, Pede tranny, Maxx half shafts. hpi black 5 spoke rims and spektrum RX....... and a parking ticket. she will be running for the first time at the Bunny Bash on Sunday at Finishline rc in Denver.. we shall see how she does. she is sitting at 12" wide and the wheelbase is 12.5". tires are just over 5" tall and the rims are 2.2 |
03-27-2008, 01:04 PM | #28 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
|
well.. thats what i get for talking about it... took it out to get it diale din for this weekends comp... and it was driving like it was pullin a boat. just would not go and then the ESC got hot as hell and the motor started smokin... so, i thought either the esc or the motor were bad, so i swapped in a 75 turn motor and a rooster crawler esc i had layin around... same thing.... so.. i took the motor out.. this thing will not free roll... acts like the internals are bound up.. took the tires off... spins freely... no marks on the rims from rubbing... tried different tires/rims.. same thing.. so.. for now.. she's in peices waiting for new bearings.. gotta rebuild her from scratch..... again. |
03-28-2008, 10:07 AM | #29 |
Powered by Awesome Join Date: Sep 2004 Location: Parker, Colorado
Posts: 3,622
| correction.. old bushing suck! they were mud and dirt proof at first, but when one decides to stck to the shaft.. "your going to have a bad time." |
Thread Tools | |
Display Modes | |
| |