RCCrawler Forums

cc01lover/97/ · 02-23-2011, 11:09 AM

Did a little update...

:mrgr een:

: mrgreen:

:mrgre en:

:m rgreen:

:mrgr een:

vtt · 02-25-2011, 01:21 PM

shanks · 03-02-2011, 05:20 PM

Digger · 03-07-2011, 12:43 PM

Here's a few of my Hx. It has been changed a little since these pics were taken, but I haven't taken more since the changes...

Specs in the pics:
Chassis: Tamiya CC01/XC
Body: Fastlane RC 1/10 Hummer Hx
Rims/tires: Axial SCX-10 beadlocks/Proline 1.9 Flatirons
Other: Proline roof rack and tools, RPM lightbar with custom mount, Traxxas Slash front bumper with working winch, Working headlights and tail lights, Full waterproof electronics(Traxxas XL5, 2056 servo, w/p radio receiver case), 55turn motor, custom 4 link rear with GPM rear axle mount.

Since these pics I have added some more decals and swapped out the flatirons for 1.9 TSL/SX Swampers from Proline. Still a work in progress.

FJ40Steve · 03-14-2011, 10:18 PM

This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it.
http://i1220.photobucket.com/albums/...40IMG_0003.jpg
http://i1220.photobucket.com/albums/...40IMG_0002.jpg
http://i1220.photobucket.com/albums/...40IMG_0001.jpg
http://i1220.photobucket.com/albums/...yzdek/FJ40.jpg
My 1:1 1979 FJ40

FJ40Steve · 03-14-2011, 10:24 PM

This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it.

My 1:1 1979 FJ40

Kuba93 · 03-17-2011, 05:02 PM

This is my second CC - Land Rover Discovery III

Thread of this build > Land Rover Discovery III by Kuba93

Motor - Integy 65T
ESC - Tamiya TEU 101 BK
Baterry - 2S Turnigy Hard Case Lipo 4000mAh
Steering servo - Hitec 645MG
Tires - Team Losi Mini Rock Bashers
Rims - Tamiya Porsche Carrera GT (

)
Shocks - Stock Tamiya oil filled..
4link, skid plate, shock holders, body mounts - homemade..

All fotos of this build http://kubamynar.rajce.idnes.cz/Land..._Tamiya_CC-01/

JS412 · 03-23-2011, 10:05 PM

tlt-1 · 03-28-2011, 02:06 AM

hi
this is my tamiya cc-01 from israel!

http://s804.photobucket.com/albums/y...eep%20crawler/

pardonmyn00b · 04-02-2011, 02:33 PM

Toyota Chinook

Mckilroy · 04-07-2011, 04:45 AM

Here is my restored Isuzu Mu, this photos are from my last vacation in south france (Cap Canaille)

If you want, you can take a look at my restored-report in the german-crawler-forum.

Greetings,
Matze

seabeejeep · 04-11-2011, 01:38 PM

revo_d · 04-14-2011, 01:03 AM

This is my cc01, standard motor and esc, savox high tourque servo and dsm 2.4, i have cut the front brick off, but i can still put the bar on.

Cheers,
Revo

msmith0322 · 04-28-2011, 09:48 AM

2forty3 · 05-03-2011, 12:59 PM

prosavage · 05-08-2011, 06:21 PM

cc01 in the lead

offacup · 05-15-2011, 08:38 PM

My first CC01 LandCruiser 40:

-cutoff front brick w/ custom skid
-shaved front arms for more droop
-gearcase mod
-homemade 4-link rear
-stock shocks up front/ SCX10 in the rear
-Integy 65T
-GD-600 GRU (not installed yet)
-TEU-104BK ESC
-RC4WD hi-Torque servo
-RC4WD OEM steelies beadlocks (two rearsides put together)
-Dick Cepek Mud Country tires

offacup · 05-15-2011, 08:44 PM

My Second CC01 (got in a trade):

-front brick cutoff (still gotta make skid)
-shaved front arms
-stock shocks up front/ 90mm scale shocks rear
-custom rear 4-link
-Terra Claw 55T
-TEU-104BK ESC
-Traxxas waterproof servo
-Flat Irons on Axial beadlocks
-Humvee body (I know I gotta lower it a bit)

xxCARLSONxx · 05-15-2011, 09:03 PM

My Pajero

Haven't had a chance to take her out yet with the new stuff. Btw, that's a badass Humvee.

02-23-2011, 11:09 AM	#122
cc01lover/97/ Newbie Join Date: Jan 2011 Location: Jakobstad,Finland Posts: 16	pajero Did a little update... :mrgr een:: mrgreen::mrgre en::m rgreen::mrgr een:

03-14-2011, 10:18 PM	#126
FJ40Steve Newbie Join Date: Jan 2011 Location: Las Vegas Posts: 6	My CC-01 FJ40 & 1:1 FJ40 This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it. http://i1220.photobucket.com/albums/...40IMG_0003.jpg http://i1220.photobucket.com/albums/...40IMG_0002.jpg http://i1220.photobucket.com/albums/...40IMG_0001.jpg http://i1220.photobucket.com/albums/...yzdek/FJ40.jpg My 1:1 1979 FJ40

03-14-2011, 10:24 PM	#127
FJ40Steve Newbie Join Date: Jan 2011 Location: Las Vegas Posts: 6	My CC-01 FJ40 & 1:1 FJ40 This is my first post. I have a full sized FJ40 and have built a CC-01 FJ40 to match it. It is a work in progress and is my 1st RC truck. I have made some skid plates out of sheet aluminum for it. My 1:1 1979 FJ40

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/tamiya-xc-cc01/167619-cc01-xc-picture-archive-no-talking.html
Posted By	For	Type	Date
CC01 by TheTambu - Scalers & Crawlers	This thread	Refback	02-22-2013 01:20 PM
台北TAMIYA CC-01 AX10 SCX10 CR-01討論串!!! - 電動汔車	This thread	Refback	02-19-2013 09:55 AM

CC01/XC picture archive - no talking - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Redcat Picture Archive - No talking	EeePee	Redcat Crawlers	404	02-08-2024 06:23 PM
Tamiya CR-01 Picture Archive - No talking	EeePee	Tamiya CR-01	316	08-24-2023 01:33 AM
Axial AX-10 Picture archive - No talking	jason	Axial AX-10 Scorpion	1456	08-19-2023 09:13 PM
1.5 scale picture archive - No talking	1BadJeepBruiser	1.5 Scale Rigs	358	07-04-2023 03:22 PM
SCX10 Picture Archive - No talking	BENDER	Axial SCX-10	3332	06-04-2023 05:40 PM

02-07-2011, 05:43 PM	#121
JS412 Quarry Creeper Join Date: Feb 2011 Location: San Diego Posts: 224

02-25-2011, 01:21 PM	#123
vtt Rock Stacker Join Date: Jun 2008 Location: Israel Posts: 64

03-02-2011, 05:20 PM	#124
shanks Newbie Join Date: Feb 2011 Location: north GTA Posts: 48

03-07-2011, 12:43 PM	#125
Digger Quarry Creeper Join Date: Aug 2004 Location: Southwestern PA Posts: 259	Here's a few of my Hx. It has been changed a little since these pics were taken, but I haven't taken more since the changes... Specs in the pics: Chassis: Tamiya CC01/XC Body: Fastlane RC 1/10 Hummer Hx Rims/tires: Axial SCX-10 beadlocks/Proline 1.9 Flatirons Other: Proline roof rack and tools, RPM lightbar with custom mount, Traxxas Slash front bumper with working winch, Working headlights and tail lights, Full waterproof electronics(Traxxas XL5, 2056 servo, w/p radio receiver case), 55turn motor, custom 4 link rear with GPM rear axle mount. Since these pics I have added some more decals and swapped out the flatirons for 1.9 TSL/SX Swampers from Proline. Still a work in progress.

03-17-2011, 05:02 PM	#128
Kuba93 Newbie Join Date: Aug 2010 Location: Czech Republic Posts: 39	This is my second CC - Land Rover Discovery III Thread of this build > Land Rover Discovery III by Kuba93 Motor - Integy 65T ESC - Tamiya TEU 101 BK Baterry - 2S Turnigy Hard Case Lipo 4000mAh Steering servo - Hitec 645MG Tires - Team Losi Mini Rock Bashers Rims - Tamiya Porsche Carrera GT ( ) Shocks - Stock Tamiya oil filled.. 4link, skid plate, shock holders, body mounts - homemade.. All fotos of this build http://kubamynar.rajce.idnes.cz/Land..._Tamiya_CC-01/

03-23-2011, 10:05 PM	#129
JS412 Quarry Creeper Join Date: Feb 2011 Location: San Diego Posts: 224

03-28-2011, 02:06 AM	#130
tlt-1 Newbie Join Date: Aug 2009 Location: israel Posts: 4	hi this is my tamiya cc-01 from israel! http://s804.photobucket.com/albums/y...eep%20crawler/

04-02-2011, 02:33 PM	#131
pardonmyn00b I wanna be Dave Join Date: Apr 2009 Location: Unnecessary Surgery Land Posts: 3,406	Toyota Chinook

04-07-2011, 04:45 AM	#132
Mckilroy Newbie Join Date: Nov 2010 Location: Germany Posts: 3	Here is my restored Isuzu Mu, this photos are from my last vacation in south france (Cap Canaille) If you want, you can take a look at my restored-report in the german-crawler-forum. Greetings, Matze

04-11-2011, 01:38 PM	#133
seabeejeep Pebble Pounder Join Date: Jan 2010 Location: flatland Posts: 144

Sponsored Links

04-14-2011, 01:03 AM	#134
revo_d Newbie Join Date: Apr 2011 Location: Gold Coast, Queensland, Australia Posts: 5	This is my cc01, standard motor and esc, savox high tourque servo and dsm 2.4, i have cut the front brick off, but i can still put the bar on. Cheers, Revo

04-28-2011, 09:48 AM	#135
msmith0322 Pebble Pounder Join Date: Feb 2011 Location: Moncks Corner Posts: 95

05-03-2011, 12:59 PM	#136
2forty3 Newbie Join Date: Jan 2011 Location: Northwest CT Posts: 33

05-08-2011, 06:21 PM	#137
prosavage Rock Stacker Join Date: Jan 2009 Location: SYDNEY, AUSTRALIA Posts: 58	cc01 in the lead

05-15-2011, 08:38 PM	#138
offacup Rock Stacker Join Date: Feb 2011 Location: On the Rock in the Middle of the Sea Posts: 92	My first CC01 LandCruiser 40: -cutoff front brick w/ custom skid -shaved front arms for more droop -gearcase mod -homemade 4-link rear -stock shocks up front/ SCX10 in the rear -Integy 65T -GD-600 GRU (not installed yet) -TEU-104BK ESC -RC4WD hi-Torque servo -RC4WD OEM steelies beadlocks (two rearsides put together) -Dick Cepek Mud Country tires

05-15-2011, 08:44 PM	#139
offacup Rock Stacker Join Date: Feb 2011 Location: On the Rock in the Middle of the Sea Posts: 92	My Second CC01 (got in a trade): -front brick cutoff (still gotta make skid) -shaved front arms -stock shocks up front/ 90mm scale shocks rear -custom rear 4-link -Terra Claw 55T -TEU-104BK ESC -Traxxas waterproof servo -Flat Irons on Axial beadlocks -Humvee body (I know I gotta lower it a bit)

05-15-2011, 09:03 PM	#140
xxCARLSONxx Rock Stacker Join Date: Mar 2011 Location: Alberta, Canada. Posts: 56	My Pajero Haven't had a chance to take her out yet with the new stuff. Btw, that's a badass Humvee.

RCCrawler Forums

Thread: CC01/XC picture archive - no talking