Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Tamiya XC/CC01
Loading

Notices

Thread: Do CR-01 Bodies Fit on CC-01?

Reply
 
LinkBack Thread Tools Display Modes
Old 03-03-2010, 11:37 AM   #1
I wanna be Dave
 
Join Date: Nov 2009
Location: Houston
Posts: 2,004
Default Do CR-01 Bodies Fit on CC-01?

Well looking at RPP Hobby, I'm thinking of either getting a Unimog or Bronco body set which I think is for the CR-01 chassis.

I bought a CC-01 chassis with no body and was wondering how I can mount these bodies nicely.

I can't seem to find replacement CC-01 bodies. Any help would be appreciated!
alexchen86 is offline   Reply With Quote
Sponsored Links
Old 03-03-2010, 11:47 AM   #2
Quarry Creeper
 
Join Date: Jan 2008
Location: san jose
Posts: 293
Default

some1 on here put the unimog body on the chassis. so yea its doable.
tpliquid is offline   Reply With Quote
Old 03-03-2010, 11:54 AM   #3
I wanna be Dave
 
Join Date: Nov 2009
Location: Houston
Posts: 2,004
Default

Yep I just saw a Unimog and a Bronco on a CC-01 chassis. I don't know how I can mount them though as I have the older CC-01 w/o the vertical mount.

Anyone know where I can find the part numbers? Thinking about using velcro or some strong magnets...
alexchen86 is offline   Reply With Quote
Old 03-03-2010, 12:00 PM   #4
Rock Crawler
 
Join Date: Jan 2010
Location: Pacifica, CA.
Posts: 919
Default

Quote:
Originally Posted by tpliquid View Post
some1 on here put the unimog body on the chassis. so yea its doable.
I wonder Who?









Grumpster1980 is offline   Reply With Quote
Old 03-03-2010, 12:04 PM   #5
I wanna be Dave
 
Join Date: Nov 2009
Location: Houston
Posts: 2,004
Default

Grumpster1980,

How did you mount the Unimog body on the CC-01 chassis?
alexchen86 is offline   Reply With Quote
Old 03-03-2010, 12:08 PM   #6
Rock Crawler
 
Join Date: Jan 2010
Location: Pacifica, CA.
Posts: 919
Default

Quote:
Originally Posted by alexchen86 View Post
Yep I just saw a Unimog and a Bronco on a CC-01 chassis. I don't know how I can mount them though as I have the older CC-01 w/o the vertical mount.

Anyone know where I can find the part numbers? Thinking about using velcro or some strong magnets...
Quote:
Originally Posted by alexchen86 View Post
Grumpster1980,



How did you mount the Unimog body on the CC-01 chassis?




The best way to check if a body will fit another RC is to measure the wheel base. Take a ruler and measure where the nut attaches your wheels to the axle then check the wheel base against the bodies measurements. You can also adjust your rear links to either shorten or lengthen your rear axle to fit the body.

The best way to mount the body is up to you. I used Velcro and made my own mounts for the rear (cut up tuperware type container screwed to the chassis then velcron on the top of the container (tub This also helps keep my RX dry and dust free) and matching velcro on the underside of the body, for the front I used a thin strip of velcro on the original hook/latch mount for the Wrangler cc-01 and then used the double sided tape suplied for electronics to mount the other sdie of the original mount from the wrangler with a matching pice of velcro and it holds strong. I did pop off a couple of times in a roll over but after I added a few more stips of velcro to the back it holds fine.

The CC-01 land cruiser body posts will also work if you do not mind the holes.


Last edited by Grumpster1980; 03-04-2010 at 11:17 AM.
Grumpster1980 is offline   Reply With Quote
Old 03-03-2010, 09:49 PM   #7
Pebble Pounder
 
Join Date: Oct 2009
Location: Farmington/Lakeville
Posts: 165
Default

You could go to Tamiyausa.com and find the part numbers of the mounts they use for the cc-01 fj40 land cruiser. The dimples for the Cruiser, the Mog and the Bronco all line up.

edit: here you go, you need two 9115264 and one 9005741. Those are what I used to mount my Bronco body on my CC-01.

Last edited by Adamsdad; 03-03-2010 at 09:53 PM.
Adamsdad is offline   Reply With Quote
Old 03-04-2010, 08:02 AM   #8
I wanna be Dave
 
Join Date: Nov 2009
Location: Houston
Posts: 2,004
Default

Adamsdad,

Thanks for that update but I can't find the part listing to order online. Seems like eTamiya and TamiyaUSA do not have those parts.
alexchen86 is offline   Reply With Quote
Old 03-04-2010, 09:55 AM   #9
Quarry Creeper
 
Join Date: Jan 2008
Location: san jose
Posts: 293
Default

grumpster would u mind bringing the unimog this weekend for me to see?
tpliquid is offline   Reply With Quote
Old 03-04-2010, 10:12 AM   #10
Pebble Pounder
 
Join Date: Oct 2009
Location: Farmington/Lakeville
Posts: 165
Default

Quote:
Originally Posted by alexchen86 View Post
Adamsdad,

Thanks for that update but I can't find the part listing to order online. Seems like eTamiya and TamiyaUSA do not have those parts.
http://www.tamiyausa.com/product/ite...uct-id=9005741
http://www.tamiyausa.com/product/ite...uct-id=9115264

It says no further info available, but if you look it says add to cart and your good to go. Thats how I did it at least, or you could just have you LHS order them for you.
Adamsdad is offline   Reply With Quote
Old 03-04-2010, 11:06 AM   #11
Rock Crawler
 
Join Date: Jan 2010
Location: Pacifica, CA.
Posts: 919
Default

Quote:
Originally Posted by tpliquid View Post
grumpster would u mind bringing the unimog this weekend for me to see?
Can do!
Grumpster1980 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com