| |
04-14-2010, 12:09 PM
| #1 |
| Rock Stacker Join Date: Aug 2008 Location: cincinnati
Posts: 97
|  dogbones?
anyone ever had many problems with breaking dogbones
|
|  |
| Sponsored Links | |
| | |
|
04-14-2010, 12:50 PM
| #2 |
| Quarry Creeper Join Date: Jan 2008 Location: san jose
Posts: 293
|
I bent a few. I suggest the GPM universals they are made out of steel.
|
|
| |
|
04-15-2010, 10:18 AM
| #3 |
| Rock Crawler Join Date: Jul 2006 Location: The Netherlands
Posts: 911
|
i Broke the gpm universals (pin) en they were slightly twisted... not that good  . but for the price you can have a few sets as a spare ;)1 run a 35T with a 3s lipo ;) running fast |
|
| |
|
04-15-2010, 03:35 PM
| #4 |
| Newbie Join Date: Oct 2008 Location: SALT ROCK,WV
Posts: 44
| busted bones BY far the best replacements are < DTXC7475 >. I have replaced mine several times before i went on the hunt for something that would be a sure fix so this is what i found.The hpi cvd do fit but not strong enough,the gpm's is a nice fit for a STOCK suspenion but no one has a cc-01 that not been lifted in the front at least a little so gpm's are a little short. I was brousing the duratrax section at my LHS and ran across these DTXC7475 axles i dont know what they are for but these are a perfect fit and with the front lift mods on my cc-01 they are a little longer and are very strong i bought all 3 packs they had on the shelf but 2 gear sets later and 3 motor rebuilds im still on the 1st set i installed. So i highly recommend these and as a bonus they was only $3.99 a pack. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
