My first trail truck journey. So I'm new to the whole crawler/trail truck world (converted nitro head) so I started out sorta small with a CC 01 Unimog. I ditched the 1.5 wheels and put on some 1.9", but I might drop back down to the 1.5" rims and some agressive tires. I also ended up ditching the Mog body, I prefer the more durable hard bodys. I also removed the rear shocks for bigger 90mm ones (I had 90 mm in the front, but that didn't allow much travel). I'm going to update this thread whenvever I put new stuff on, as well as do some pictures. Mog body with the bigger wheels, shocks and lightbar: http://i1213.photobucket.com/albums/...462739_n-1.jpg Pajero hardbody with lightbar: http://i1213.photobucket.com/albums/..._1669780_n.jpg Pajero hardbody again: http://i1213.photobucket.com/albums/...950668_n-1.jpg Pajero hardbody with custom blue LEDs (didn't have lighting kit) and brick removed. I will be putting up a rubber wall and putting lights in the lightbar: http://i1213.photobucket.com/albums/...660467_n-1.jpg And yes, the downstairs bathroom is my designated "hobby room" :D |
Looks good so far. But the body is mounted a bit high. Nice tires though! |
Thanks! Yeah the body is a bit high. Was having problems with the tires catching in the wheel wells when articulating. I'm thinking of dropping down to a 1.5" beadlock set with either some Mud Slingers or Super Swampers (assuming I can get those in 1.5"). |
the Boggers don't come in 1.5 but the IROK's and also the Mickey Thompson Baja MTZ do. I'd go with either one of these. "thumbsup" |
Thanks for the heads up on that, I'll check those out next time I'm at the LHS. |
So stopped down in the 'ol hobby shop to see if my CC Sidewinder ESC was in. Turns out for some strange and unknown reason it won't be here for another 2 weeks. So I just traded it in for an XL-5. I also picked up some 90mm RC4WD white shocks and a Novak 45t Rock Star motor. I also put an order in for some 1.55" Stamped Steel RC4WD beadlocks (white) and 1.55" Rock Crusher X/T tires to go with them. I like the 1.9s I currently have on, but they catch too much in the wheel arches for me. I also was introduced to the Junfac 4 link conversion kit for the CC01 and that really interested me. I might have to pick up that and put some portals on the front to gain a little clearance. I'll post some picks once I get some spare time. |
Just an update here, haven't done one in awhile. Needed an excuse to try the camera out on my new android phone, hopefully they look nice and crisp. Picked up a Novak Rock Star turn motor http://i1213.photobucket.com/albums/...nxx/IMG003.jpg Motor in truck http://i1213.photobucket.com/albums/...nxx/IMG002.jpg My Sidewinder V2 got lost in shipment, so I just picked up this XL5 and the Novak http://i1213.photobucket.com/albums/...nxx/IMG001.jpg My waterproof box (originally made to encase the Sidewinder, but went with the XL5 so I have ALOT of spare room in there) http://i1213.photobucket.com/albums/...nxx/IMG004.jpg Picked up a set of 1.55" Stamped Steel RC4WD Rims (ditched the 1.9") http://i1213.photobucket.com/albums/...nxx/IMG006.jpg Also picked up a set of Rock Crusher X/T (1.55") from RC4WD http://i1213.photobucket.com/albums/...nxx/IMG007.jpg Top down view of the truck without the body http://i1213.photobucket.com/albums/...nxx/IMG005.jpg Side view with the body http://i1213.photobucket.com/albums/...nxx/IMG008.jpg Front view http://i1213.photobucket.com/albums/...nxx/IMG009.jpg Front view with the lights on (still need some in the lightbar) http://i1213.photobucket.com/albums/...nxx/IMG010.jpg Let me know what you guys think! |
Looks Good!!! "thumbsup" I think I may have to go to 1.55's How do you like the shocks? I have those shocks too, in black. I'm only using them on the back since they're too long for the front (I wonder if portals would fix that):mrgreen:. Did your 1.55's fit good without having to shave? I've been thinking of picking up some of those beadlocks also but, I was worried about having to shave the axles to fit them :???: |
I didn't shave any of the axles to fit these. I had to shave the body a bit to eliminate the rubbing when turning and articulating. I like these wheels a lot. I haven't had a chance to take them out crawling yet, just tested 'em in the backyard. |
Looks great man. good job |
Nice Job! I luv the look of those rims. I may have to pick up a set, and some tires, to see how they look on my Landy. |
Quote:
|
All times are GMT -6. The time now is 10:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com