|
| LinkBack | Thread Tools | Display Modes |
11-17-2011, 04:00 AM | #1 |
RCC Addict Join Date: Feb 2010 Location: New Jersey shore
Posts: 1,482
| what can be done to tighten up the steering?
I was thinking traxxas ball ends. not sure how to make the servo stiffer? any ideas thanks
|
Sponsored Links | |
11-17-2011, 06:25 AM | #2 |
I wanna be Dave Join Date: Sep 2011 Location: Douglassville, PA
Posts: 4,218
|
TRX ball ends help a ton. Aside from the GPM steering mod, remove the servo saver and use a solid arm on the steering servo. Helps quite a bit. If you don't have a solid arm, cover the servo saver spring with a zip-tie. Will keep it from flexing as much. |
11-17-2011, 07:13 AM | #3 |
Quarry Creeper Join Date: Nov 2010 Location: Canada
Posts: 223
|
I went with a solid servo arm. So far my steering seems pretty good. We shall see how it lasts as I use it.
|
11-17-2011, 09:24 AM | #4 |
Quarry Creeper Join Date: Feb 2008 Location: Oakdale, MN
Posts: 420
| |
11-21-2011, 07:14 AM | #5 |
RCC Addict Join Date: Feb 2010 Location: New Jersey shore
Posts: 1,482
|
ok thanks guys.. i was thinking about using threaded rod with aluminum over it and a strength upgrade. cant seem to find small rod tho. any ideas how to make the whole servo stiffer.. seems to flex a lot thanks
|
11-21-2011, 08:17 AM | #6 |
Quarry Creeper Join Date: Jul 2008 Location: Garden State
Posts: 298
| Your servo is flexing because you don't have your endpoints adjusted making your servo pull and push to far than needed.
|
Thread Tools | |
Display Modes | |
| |