CC01 stock springs
 

Hi,

I find the stock springs to firm, what options do I have for softer springs.

I can not seem to find out much about the sizes I would need to fit.

Why do they have different ones for the front and back?

Any recommendation for springs?

Or should I just change the shocks completely?

I just find it bounces a bit too much, even after I changed the wheels for softer RC4WD wheels and tires.

Thanks

Re: CC01 stock springs
 

Customworks long springs will fit. You can buy an assortment of 9 pair for $26... i'm building my kit now and have not used them but they do fit.

they range from a 2lb rate to a ten. but if it bounces to much you could ad thicker shock oil.

Re: CC01 stock springs
 

thicker shock oil and add a touch of weight to the bottom of the tub.

Re: CC01 stock springs
 

Stock springs are good for the hardbodies, but a little too hard for the lexan bodied rigs. Tamiya part# 9805576 is the perfect spring rate I've found.