|
| LinkBack | Thread Tools | Display Modes |
04-17-2019, 11:35 AM | #1 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| My late dad's CC01 re-build
Hello from MNL! Here's a 23 year old kit of my dad that I am re-building. It was left in a storage at my parents house since my dad passsed away in 2003. Last year, I picked it up when I decided to get back to RCing and re-build it. Here it was when I got it from the storage First was upgrade the suspension with new 100mm shocks Rear: Front: I created a new shock tower and made holes on the chassis to accommodate the 100mm shocks... Then next was replaced all plastic bushings with rubber sealed bearings Last edited by Nicadraus; 05-11-2019 at 09:34 PM. |
Sponsored Links | |
04-17-2019, 11:44 AM | #2 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
Replaced the stock plastic hex hub to aluminum 12mm... Wider wheel base by a few mm... New set of wheels and tires... The stance... Next was steering upgrade... Replaced the steering column to GPM aluminum steering set Last edited by Nicadraus; 04-18-2019 at 08:03 PM. |
04-17-2019, 11:50 AM | #3 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
Ordered (arrived yesterday) a PowerHD digital waterproof 20kg servo ($22) and some extra dogbones (4 pcs for $3) I have also installed a new Radiolink RX. Ordered a brushed 60A brushed ESC and 27T & 55T motors yesterday. Should be here by next week (April 24-29). Last edited by Nicadraus; 04-18-2019 at 08:05 PM. |
04-18-2019, 01:12 AM | #4 |
Newbie Join Date: Sep 2016 Location: GB
Posts: 22
| Re: My late dad's CC01 re-build
Looks great. Good idea for fitting the longer shocks. Your dad would be proud. Glad to see it rebuilt rather than left and forgotten. Hope you enjoy using it. Sent from my SM-T820 using Tapatalk |
04-18-2019, 06:43 AM | #5 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build Thanks! I've always wanted to set up a crawler/rally type of off-roader and I remembered that this kit was still at my parents' house (along with others, FF01, M-01, nitro boats, etc) and decided to get it and rebuild it instead of buying a new (or used) kit.
|
04-18-2019, 11:38 AM | #6 |
RCC Addict Join Date: Nov 2014 Location: Nowhere
Posts: 1,326
| Re: My late dad's CC01 re-build
Great use for an old rig |
04-22-2019, 06:42 PM | #7 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build |
04-22-2019, 08:46 PM | #8 |
Rock Crawler Join Date: Mar 2015 Location: Waltham
Posts: 707
| Re: My late dad's CC01 re-build
I love this. Well done.
|
04-23-2019, 07:32 AM | #9 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build |
04-23-2019, 07:39 AM | #10 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
New arrivals and installed them... - 60A Waterproof brushed ESC from GoolRC bundled with 27t motor and another 55t motor - LED light set Did a few thing during my spare time... - Changed the ESC's plug to deans - soldered the wires on the new motors - installed the new 55t motor and ESC. |
04-27-2019, 07:32 AM | #11 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
Got a new battery and modified the battery bay to fit it... Replaced the plug to deans Perfect fit |
04-27-2019, 07:41 AM | #12 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
Preparation for painting... Sanded down removed the "orange peel" effect from the previous paint. Filled the antenna hole with putty. Covered the hole underneath first then applied the putty. After sanding... created holes for the tail lights... Need to improve and clean the edges of the holes with a file. |
04-27-2019, 08:31 AM | #13 |
Quarry Creeper Join Date: May 2010 Location: ny
Posts: 466
| Re: My late dad's CC01 re-build
Keep up the good work Sent from my SM-G965U using Tapatalk |
04-27-2019, 11:34 PM | #14 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build |
04-29-2019, 06:29 AM | #15 |
Rock Crawler Join Date: Mar 2015 Location: Waltham
Posts: 707
| Re: My late dad's CC01 re-build
This is going well!
|
05-06-2019, 07:19 AM | #16 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
My daughter requested a Teal color. So I mixed the color today and sprayed 5 coats as base color for the body using automotive polyurethane paint. Will cure the paint and start masking the flairs for secondary color (silver with a few drops/mix of yellow). Clear top coat next and wet sanding to remove minimal orange peel texture then 3 step buffing. Will detail the window trims, grill, light frames, signal lights, door handles, key slots and others too. Final touch will be the installation of the lights, front and back. Last edited by Nicadraus; 05-06-2019 at 07:21 AM. |
05-06-2019, 11:17 AM | #17 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,073
| Re: My late dad's CC01 re-build
very nice, i forgot how old that kit really is until i saw the mechanical speed control, i have a montero cc-01, but it came with the newer esc (200, i think.
|
05-08-2019, 12:53 AM | #18 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
So did the masking of the flairs and painted them to the secondary tone. *Masked the inner windows Masked everything else that should not be painted. Mixed the paint, catalyst and thinner. Color is silver with drops of yellow. Painting... After curing the flairs overnight, I masked the signal and tail lights for silver |
05-08-2019, 12:55 AM | #19 |
Pebble Pounder Join Date: Apr 2019 Location: Tatooine
Posts: 155
| Re: My late dad's CC01 re-build
Then sprayed... Removed the masking once dried Hand painted the clear orange and clear red lights Will spray the clear to coat tomorrow if the weather is good. Then wet sand, buff and finish the details of the window trims, grill, emblem, and install the lights. |
05-08-2019, 06:12 AM | #20 |
I wanna be Dave Join Date: Sep 2011 Location: Douglassville, PA
Posts: 4,218
| Re: My late dad's CC01 re-build
Loving the colors, they compliment each other well.
|
My late dad's CC01 re-build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Late to the Party Losi MRC BWD Mini Wedge LP 2.0 Build | psupaulb | Losi Mini-Rock Crawler | 10 | 01-12-2019 11:43 AM |
A Late Thread To My Build... | VTHDAN4467 | Vaterra Twin Hammers | 6 | 01-18-2016 08:17 AM |
First RC Build CC01 | BTaylor20 | Tamiya XC/CC01 | 20 | 05-12-2015 10:56 AM |
My late to the party eclipse build | motojeep | Axial AX-10 Scorpion | 29 | 03-11-2013 09:43 PM |
Thread Tools | |
Display Modes | |
| |