| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
07-31-2019, 08:00 PM
| #21 |
| Newbie Join Date: Jul 2019 Location: China
Posts: 29
|  Re: Build a crawler type CC01 using 3D print parts
Finally! my under drive gearbox for CC01 has been fully installed! Took less effort than expected, just redesigned the support parts for once, and replaced the rigid coupling with a new universal joint, and now everything seems right! Later I'll take the chassis for a field test and try to find if any thing not right...  At first I overrated the overall accuracy of the entire structure, and try to use a rigid coupling to connect the gearbox with the transfer case, and then the gearbox wouldn't stop wriggle...had to buy some new universal joint for the input shaft of my gearbox. The gearbox has a reduction ratio of 1.1(19T/21T), which means the rear wheel has a 10% under drive I assume.    Last edited by ShouryLiu; 07-31-2019 at 08:07 PM. |
|  |
| Sponsored Links | |
| | |
|
07-31-2019, 09:18 PM
| #22 |
| I wanna be Dave Join Date: Jun 2017 Location: Humboldt county
Posts: 4,482
| Re: Build a crawler type CC01 using 3D print parts
Very nice work! I always love the creative CC01 builds on here. |
|
| |
|
07-31-2019, 09:43 PM
| #23 |
| Rock Crawler   Join Date: Apr 2014 Location: Portland
Posts: 835
| Re: Build a crawler type CC01 using 3D print parts
Awesome Idea with the rear gear reduction.. I'm building one and also having rear shock issues.. Have some custom mounts but can't get the ride height I want and the droop I want. |
|
| |
|
08-01-2019, 07:44 AM
| #24 |
| Rock Stacker Join Date: Aug 2018 Location: Australia
Posts: 64
| Re: Build a crawler type CC01 using 3D print parts
Here's mine 313 4 runner cc01 I'm fight the issue of front ground clearance need longer arms but performs really well  Sent from my SM-G965F using Tapatalk |
|
| |
|
08-15-2019, 08:52 AM
| #25 |
| Quarry Creeper Join Date: Dec 2012 Location: Pioneer, 95666
Posts: 397
| Re: Build a crawler type CC01 using 3D print parts
That's a really good idea to use the space left open from relocating the motor, good job!
|
|
| |
|
09-05-2019, 01:42 AM
| #26 |
| Newbie Join Date: Jul 2019 Location: China
Posts: 29
| Re: Build a crawler type CC01 using 3D print parts
Cool 4runner! I also have the issue of front ground clearance, I haven't found a CVD shaft that has enough working angle, lifting the front suspension will result in shaking of the wheel.
|
|
| |
|
09-05-2019, 02:21 AM
| #27 |
| Newbie Join Date: Jul 2019 Location: China
Posts: 29
| Re: Build a crawler type CC01 using 3D print parts
Anyone feel excited about the new CC02? finally!! I love CC01, but I definitely want a evolved CC platform. I was a little suprised at the front rigid axle of CC02, but then I realised what TAMIYA was thinking: CC02 will not be a replacement of old CC01, they will appear on shelf simultaneously. It seems the working angle of CC02's drive shaft is better than CMX/CFX, also the battery is lower, but the gearbox seems to be too low...Anyway, I must buy one... I even prepared the wheels for CC02, HAHA...  |
|
| |
|
09-19-2019, 07:04 AM
| #28 |
| Newbie Join Date: Sep 2019 Location: Australia
Posts: 3
| Re: Build a crawler type CC01 using 3D print parts
Mate, really enjoyed reading about your build on the cc01 and what creative ideas you have had. Makes me won’t to get mine back out and start giving it some upgrades/updates. I’m not to shore on the new cc02 chassis, looks a little to “boxy” to me, and I really was wishing that it to would have the ifs setup like the cc01 but with a better steering setup and steering angle. |
|
| |
|
10-03-2019, 05:48 AM
| #29 |
| Quarry Creeper Join Date: Feb 2008 Location: Oakdale, MN
Posts: 420
| Re: Build a crawler type CC01 using 3D print parts
Cool build! You have a lot of interesting features and enjoyed reading this through out. Not sure how I feel on the new CC02, but time will tell. With all the other scale kits out, I think it is outdated before its release. We will see though.
|
|
| |
|
04-23-2020, 01:34 AM
| #30 |
| Newbie Join Date: Nov 2011 Location: england uk
Posts: 11
| Re: Build a crawler type CC01 using 3D print parts
Fantastic work ,please can I have the STL files I really need to gear down my motor is so hot send Stl to machinedred@gmail.com thanks so much
|
|
| |
|
Build a crawler type CC01 using 3D print parts - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| looking for someone to 3D print me parts | kgb424 | Vendors Miscellaneous | 1 | 01-19-2017 11:58 AM |
| My First CC01 build...Or crawler for that matter! | laxboy411 | Tamiya XC/CC01 | 9 | 03-01-2014 01:39 PM |
| Print your own rc parts? | RusT808 | Chit Chat | 16 | 11-27-2011 10:45 AM |
| |
Linear Mode
