RCCrawler.com Bulletin Board

EeePee · 06-03-2007, 06:24 AM

- Super rugged aluminum construction
- Manufactured with advanced internal spline technology
- Engineered & manufactured by RC4WD
- Optimized for severe driving conditions
- Direct fit for Tamiya TLT-1 & F-350

Conventional "open" differentials tend to equalize the power delivered through both wheels. Thus if one wheel loses traction - "spins out" on snow, mud, sand, or gravel - it delivers very little power to the ground. The other wheel will deliver only very little power. Often this is not enough to keep the vehicle moving - it's stuck. A locked differential or spool maximizes traction by delivering 100% of axle torque and power to both wheels.

1x RC4WD TracGear for TLT-1 & F-350 - $34.99

Raptor Crawler Black Axle

The Raptor axle is the most advanced crawling axles on the market today. It utilizes micro size hardened gears to ensure it's ultra compact size. The Raptor axle is light, beefy, compact and offers maximum ground clearance.

- CNC machined aluminum housing
- 10:1 to 30:1 Gear Ratio (with 8tooth pinion gear)
- Hardened steel gears
- Heavy duty stainless steel drive/axle shafts
- Huge heavy duty aluminum axle tubes
- Use 32 Pitch pinion gears (8 to 20 Tooth)
- Monster size clear dust cover for fine tuning gear mesh
- Fit 12mm wheel hex
- Designed for 1/7 to 1/10 scale size trucks
- Engineered by RC4WD USA
- Full metal shield bearings
- Width: 290mm / 11.4inch
- Heigh: 51mm / 2inch
- Weight: 411grams / .9 lbs

What's included:

1x Raptor Black Axle
1x Aluminum upper 4 links posts
2x Drive & axle shafts
2x Aluminum knuckles
1x 8 tooth pinion gear
1x Clear dust cover (PVC)
Note: For a complete truck, you will need 2 of these axle
Note: Raptor axle uses a spool instead of a differential. It is designed for off-roading use only.

1x RC4WD Raptor Crawler Black Axle - $129.99

RC4WD 32 Pitch Pinion Gears are $7.99 each

6 Tooth pinion - 7 Tooth pinion - 9 Tooth pinion

Aluminum knuckles for the WK and the straight axle adapter for the TLT are coming very soon.

www.tcscrawlers.com

06-03-2007, 06:24 AM	#1
EeePee TEAM MODERATOR Join Date: Jul 2004 Location: Chit Chat Posts: 14,103	New RC4WD Products at The Crawler Store - www.tcscrawlers.com TracGear Spool Locker for TLT-1 & F-350 - Super rugged aluminum construction - Manufactured with advanced internal spline technology - Engineered & manufactured by RC4WD - Optimized for severe driving conditions - Direct fit for Tamiya TLT-1 & F-350 Conventional "open" differentials tend to equalize the power delivered through both wheels. Thus if one wheel loses traction - "spins out" on snow, mud, sand, or gravel - it delivers very little power to the ground. The other wheel will deliver only very little power. Often this is not enough to keep the vehicle moving - it's stuck. A locked differential or spool maximizes traction by delivering 100% of axle torque and power to both wheels. 1x RC4WD TracGear for TLT-1 & F-350 - $34.99 Raptor Crawler Black Axle The Raptor axle is the most advanced crawling axles on the market today. It utilizes micro size hardened gears to ensure it's ultra compact size. The Raptor axle is light, beefy, compact and offers maximum ground clearance. - CNC machined aluminum housing - 10:1 to 30:1 Gear Ratio (with 8tooth pinion gear) - Hardened steel gears - Heavy duty stainless steel drive/axle shafts - Huge heavy duty aluminum axle tubes - Use 32 Pitch pinion gears (8 to 20 Tooth) - Monster size clear dust cover for fine tuning gear mesh - Fit 12mm wheel hex - Designed for 1/7 to 1/10 scale size trucks - Engineered by RC4WD USA - Full metal shield bearings - Width: 290mm / 11.4inch - Heigh: 51mm / 2inch - Weight: 411grams / .9 lbs What's included: 1x Raptor Black Axle 1x Aluminum upper 4 links posts 2x Drive & axle shafts 2x Aluminum knuckles 1x 8 tooth pinion gear 1x Clear dust cover (PVC) Note: For a complete truck, you will need 2 of these axle Note: Raptor axle uses a spool instead of a differential. It is designed for off-roading use only. 1x RC4WD Raptor Crawler Black Axle - $129.99 RC4WD 32 Pitch Pinion Gears are $7.99 each 6 Tooth pinion - 7 Tooth pinion - 9 Tooth pinion Aluminum knuckles for the WK and the straight axle adapter for the TLT are coming very soon. www.tcscrawlers.com Share Share this post on Digg Del.icio.us Technorati Twitter Facebook Last edited by EeePee; 06-03-2007 at 06:28 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links

RCCrawler.com Bulletin Board

Thread: New RC4WD Products at The Crawler Store - www.tcscrawlers.com