Let's see your Losi!

[NFG]

My LCC awaiting it's turn on "The Pile of Doom!" at Mike's Garage.





Mike has been hosting a fun Comp season until our official one starts in the spring. I am the only Losi in our club and one of the few running a Shafty. Last Sunday I placed 2nd in Novice beating a few MOAs and another shafty. I will be running this rig again on Sunday and hope to do better now that I have a bit more time on it. I just put in a Tekin 35t motor to replace the one I had borrowed from my MOA project. Wheel speed is your friend....

[crawlers71]

just picked it up 12/2/12

[zim35]

it is now down to 3.75 lbs

[old man 52]

New project in the making.

[minicrawlerguy530]

Just started slapping electronics on it for now. Got some white dot rovers for the front and blue dot rovers for the rear and C.I foams( thanks guys your awesome). I'm gonna flip and center my trans and try to mount everything nice and low.

[HellGoneWild]

fresh from the work bench

[NFG]

Well I picked up a BJ3 chassis a few weeks ago and switched over my MOA set up. Not happy with a lot of the basics at this point. It is a work in progress.....

Will be running two micro Sidewinders and Novak "The Dig". Two cheap 35t motors for now. All synced and running just waiting on getting the thing semi set-up so I can start testing. I am in the middle of moving so the next few weeks are a right off. Packing sucks!

[Stonewall]

Here's my LCC with some light mods.

[jgrim]

Time for an update. Lots of changes to the LNC since April 2012.
Hitec 7955 servo
HeyOK adjustable BEC
Gens Ace 1000mah 3S Lipo
Losi receiver
Castle SV2 ESC
Holmes 35T motor
HD worm/spool in front
Rover white dot tires with C.I. foams
Axial Rockster wheels
LCC lower links
0.9 lb/in CKRC springs
Losi Grappler Pro body

Add in acres and acres of large granite outcrops nearby and you have crawler heaven.

[crelesy]

Update on my LNC.
-new body + hack at the chasis
-LCC tranny with te hitec 82MG as servo (small!!)
-little stirdy 1050kv outrunner (Cheap!)
-Ezrun 35ah ESC ( even cheaper!)
-3s 850mah
-Savox 30kg servo at 6v
-shaved rovers white dot
-HD worm gear up front
-5a BEC 6v (Only on steering servo, Dig servo is regulated from the ESC)
Wheelspeed is'nt great, but loads of power!
Nothing besides the axel's and wheels is standard now.

[GrimJeeper91]

Update on the NC:

Tekin Roc 412 2300kv
Castle Mamba Max Pro
Castle BEC
JR 8711 High Torque Servo
Gens Ace 1000mah 3S Lipo
HD worm/spool in front
Rover white dot tires with C.I. foams
Motoworx 5 spoke aluminum beadlocks
LCC shocks & upper shock mounts
LCC lower links and steering links
Proline Crowd Pleazer Body

[[crawlosi]]

out of the box
black/ weighted wheels

[maRRtin]

here is my LNC. Im running an enroute Neon s 9.5 sensored esc with an enroute XRS 10.5t motor. 14toot pinion, bent linksthunderpower 800ma 3s lipos. bent lower links and a few other goodies. Slowly converting it to a LCC.

M.

[ngc]

Losi Night Crawler:
- Traxas Titan 21T motor
- Losi MSC 12L Speed Control
- Proline Titus Wheels with weights in the front
- Hot Bodies Rover white dot
- Hitec HS-645mg Servo
- Homemade Lower links
- Zippy 2200mah 2s lipo
- Futaba 3PRKA Transmitter
- Homemade roll cage

Waiting on this delivery:
- Castle BEC
- LCC Shock Arms
- Losi Gold springs

All the electronics nice and low in the chassis...



With my friends SCX10



All bruised up after a comp...

[akatimshady]

Just got it today, havent got to use yet as when I went to test drive Novak 2s Goat went poof. Cant wait to get her going as this is my first crawler.

Sent from my SCH-I605 using Tapatalk 2

[Workdaddy]

First body trim and paint. Proline Ford F150

[Workdaddy]

My latest body, love the truck... But the VDub lets 'er flex a little more

[[crawlosi]]

[MAXIMUS-05RAVEN]

Heres a couple pics of my Losi, waiting on a Novak 3s Goat went with a 21.5t using a 1300mah 3s lipo. 10 amp castle BEC and have a 7950TH steering servo a 225mg dig servo. High clearance links, some nightcrawler lights with a turnigy receiver switch to turn them on and off. white dot HB Rovers mounted on proline wheels 6oz up front 3oz in the rear using a 4PL for a radio. Thanks for all the tips and helpful info from forum members . On with the pics...

[alterchristopher]

My night crawler