And ware and what side does the dig servo go ? Fish phone |
2 Attachment(s) Well best I can do with what I had Fish phone |
Re: OverkillRC's: The Phoenix Here is mine not quite done yet but almost, with any luck I'll be able to test it today. http://i674.photobucket.com/albums/v...4_101403-1.jpg http://i674.photobucket.com/albums/v...4_101419-2.jpg http://i674.photobucket.com/albums/v...4_101446-2.jpg |
Re: OverkillRC's: The Phoenix Quote:
Your rear uppers need to be moved higher on the chassis |
Re: OverkillRC's: The Phoenix Quote:
My opinion, take it back to the stock link under the servo. |
Re: OverkillRC's: The Phoenix Yup, it's on top of my rear servo mounted to a piece of kydex that I cobbled real quick. |
Re: OverkillRC's: The Phoenix Quote:
Also, what tranny is that? It puts that motor way to high up, you'll have less than desirable stability |
Re: OverkillRC's: The Phoenix its an lnc trans with some hr aluminum housings. and agreed on clocking the motor back down to stock position, i think that that is just going to be a headache on rock. |
Re: OverkillRC's: The Phoenix Hey guys, i put 4 more chassis up on my website as a pre-order. ETA ship date is in about 4 weeks (late april) once i get the new fins and skids I have material headed to the new machinist (appox 1 week), it'll take him about a week to get the program written/proven, 1 week worth of shipping to me to approve the parts, then it'll be another week for him to run the rest of the parts and ship them to me. Once i get them, they will be shipped out. |
Re: OverkillRC's: The Phoenix I should have my first fin in a week, once i approve it my machinist will run the rest, skids are afew more days out. So were talking 2-3 weeks and i'll be shipping out good parts |
Re: OverkillRC's: The Phoenix Just pre-ordered "thumbsup" |
Re: OverkillRC's: The Phoenix 1 Attachment(s) This new fin look good? :mrgreen: |
Re: OverkillRC's: The Phoenix I'm working on a pretty cool insert how-to as well...the format its very time consuming, but the end results are spectacular...i'll be doing this for all my products from here on out, i'm the using inserts as my lab rat to figure stuff out. The approach for install is abit different than petes, the way i'm writing it up is easier todo with less risk involved but its more time consuming |
2 Attachment(s) :) Fish phone |
Re: OverkillRC's: The Phoenix Looks awesome. Can't wait. Pre-Ordered mine a few days ago. Thanks guys. Keepin the Worm alive!!!! |
1 Attachment(s) Mmmm wtf I did not eving take a hard hit Fish phone |
Re: OverkillRC's: The Phoenix Quote:
|
It fail from 2foot maybe 3 it's **** ever time it flexes it pulls it out Fish phone |
Re: OverkillRC's: The Phoenix Interesting, kinda disturbing it broke there...i've abused the hell out of mine with 10-20ft falls/tumbles. I believe i sent everyone a spare insert, if you still have it, drill the skid out, and thread it in, then drill a hole a the chassis there and bolt it back together. If that doesn't fix it i'll try and get you another one |
Idk if that will work bc it's right bye the hole for the bar that holds the links Fish phone |
Re: OverkillRC's: The Phoenix i mean drill out that hole and put the insert in it. You can still get a small pin through the insert to beat out the captured pin |
Ohhhhhhhhh ok I will tri that Fish phone |
I was looking at it looks like it hit the fin win it hit so it pulled the upper links back so thats y it did that Has this ever did that to you ? Fish phone |
1 Attachment(s) |
Re: OverkillRC's: The Phoenix i'm still trying to figure out how you broke it there :shock: on my protos, even in cold weather, i never broke a plate there. i broke the shock arm on the v3.1, and other than that, i haven't broke one since. i've thrown the thing across my shop for the hell of it and still never got that. |
Yea I don't but it's going now I gusse win I want over the fin hit pulled on it or something Fish phone |
Re: OverkillRC's: The Phoenix even that didn't do anything, i abused my truck with intent to break plates. |
Idk it did lol I have been talking ab going back to the stock chassis bc my side hill sucks now I tun over on the lil dum stuff now and I have mine just like yours so idk what it is Fish phone |
Ok so I'm a da I got some new lcc shocks they had some long ass rod ends had me at way over 4in. So it's at 3-1/2 now and wb is 12-1/2 Fish phone |
1 Attachment(s) |
Re: OverkillRC's: The Phoenix Quote:
Also widening the trackwidth helps too. |
Ohhh well I have ben playing with it and I'm geting it there and ant the losi white the softest ? Fish phone |
Re: OverkillRC's: The Phoenix no. the losi whites are 1.8 pound springs. next down is losi gray's at 1.6, then losi golds at 1.4, and losi blacks at 1.2. you gots alot of options there!! |
Ohhhhhh ok thanks Fish phone |
Re: OverkillRC's: The Phoenix Fish, are you running any knuckle weights? |
No I have the mayham wheels the front is 9oz rear is like 6oz Fish phone |
Re: OverkillRC's: The Phoenix Quote:
you ought to start a build thread fish"thumbsup" |
Re: OverkillRC's: The Phoenix Quote:
I don't think the fin could cause that, but i ran the shorty fin till the comp Saturday...i may have to try some fin impacts. |
I might just do that and on the Chassis I have one on the way he just want back to the stock chassis and put topper on it looks good to Fish phone |
Re: OverkillRC's: The Phoenix Any new eta on the kits? "thumbsup" |
All times are GMT -6. The time now is 12:07 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com