And ware and what side does the dig servo go ? Fish phone |
2 Attachment(s) Well best I can do with what I had Fish phone |
Re: OverkillRC's: The Phoenix Here is mine not quite done yet but almost, with any luck I'll be able to test it today. http://i674.photobucket.com/albums/v...4_101403-1.jpg http://i674.photobucket.com/albums/v...4_101419-2.jpg http://i674.photobucket.com/albums/v...4_101446-2.jpg |
Re: OverkillRC's: The Phoenix Quote:
Your rear uppers need to be moved higher on the chassis |
Re: OverkillRC's: The Phoenix Quote:
My opinion, take it back to the stock link under the servo. |
Re: OverkillRC's: The Phoenix Yup, it's on top of my rear servo mounted to a piece of kydex that I cobbled real quick. |
Re: OverkillRC's: The Phoenix Quote:
Also, what tranny is that? It puts that motor way to high up, you'll have less than desirable stability |
Re: OverkillRC's: The Phoenix its an lnc trans with some hr aluminum housings. and agreed on clocking the motor back down to stock position, i think that that is just going to be a headache on rock. |
Re: OverkillRC's: The Phoenix Hey guys, i put 4 more chassis up on my website as a pre-order. ETA ship date is in about 4 weeks (late april) once i get the new fins and skids I have material headed to the new machinist (appox 1 week), it'll take him about a week to get the program written/proven, 1 week worth of shipping to me to approve the parts, then it'll be another week for him to run the rest of the parts and ship them to me. Once i get them, they will be shipped out. |
Re: OverkillRC's: The Phoenix I should have my first fin in a week, once i approve it my machinist will run the rest, skids are afew more days out. So were talking 2-3 weeks and i'll be shipping out good parts |
Re: OverkillRC's: The Phoenix Just pre-ordered "thumbsup" |
Re: OverkillRC's: The Phoenix 1 Attachment(s) This new fin look good? :mrgreen: |
Re: OverkillRC's: The Phoenix I'm working on a pretty cool insert how-to as well...the format its very time consuming, but the end results are spectacular...i'll be doing this for all my products from here on out, i'm the using inserts as my lab rat to figure stuff out. The approach for install is abit different than petes, the way i'm writing it up is easier todo with less risk involved but its more time consuming |
2 Attachment(s) :) Fish phone |
Re: OverkillRC's: The Phoenix Looks awesome. Can't wait. Pre-Ordered mine a few days ago. Thanks guys. Keepin the Worm alive!!!! |
1 Attachment(s) Mmmm wtf I did not eving take a hard hit Fish phone |
Re: OverkillRC's: The Phoenix Quote:
|
It fail from 2foot maybe 3 it's **** ever time it flexes it pulls it out Fish phone |
Re: OverkillRC's: The Phoenix Interesting, kinda disturbing it broke there...i've abused the hell out of mine with 10-20ft falls/tumbles. I believe i sent everyone a spare insert, if you still have it, drill the skid out, and thread it in, then drill a hole a the chassis there and bolt it back together. If that doesn't fix it i'll try and get you another one |
Idk if that will work bc it's right bye the hole for the bar that holds the links Fish phone |
All times are GMT -6. The time now is 09:22 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com