Pics? I may do this Sunday. I was thinking a 15t would be pretty good, keep us posted on that 18t tho!

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

Any smaller than 15t would require more extensive work on the motorplate,- I think :)

18t after the mod equals about 30t with stock LNC......;-)

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

love in one of your vids you pick the losi up and walk ten feet with it then set it down to run next spot. only us losi guys can understand why we do that.:lmao: how are your shocks setup, piston spring and shock oil? and do you like it?

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

Hey,

I'm also running the JENS mod, it is pretty amazing"thumbsup"
Thanks to JENS for showing"thumbsup"
I'm running a 19t pinion... I found that it is nice:)

"Shocks


Traxxas Bog bores – 4” - #2662


Rod end cap mod -


Front: 4.5”


Rear: 4.75” - externally limited 12mm – Fuel tubing


Losi mini T springs (front – Pink; rear – Red)


Hacked up (sensing a theme here) Traxxas spring cups


35 wt oil – front and rear. May go thicker, but it is running awful good."

Page one first post

There have been a few changes since then.
Silver (soft) in the rear
35wt oil front
60wt rear

Piston and all is stock.

Well it ran great today. I think that I may have to drop a few teeth on the pinion. The motor got barely warm, but lacked a little low end. I could comp it like that, but would like a little more grunt. It was very, very smooth. But I got to say the top end is astonishing. If an 18T pinion is comparable to a 30, I can see why. But it definitely did not lack the bottom end like I was running a 30 pinion on the stock tranny.

I'm impressed!

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

The more I read this, the more it makes me smile.

I guess the LCC conditioning has gotten the best of me, because I do the same thing with my Berg.

I haven't drivin another crawler other than my lnc. I do this as well. I'm building an moa interested to see if i carry that everywhere too haha

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

You won't be able to pick up that pig.:lmao:

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

Hey Dentonmac,

could you post a pic of your decased MMP, pls?:)


regards

Re: dentonmac's LCC Shaftsman - Pic Heavy
 

Say it with a cherry on top and I guarantee he will."thumbsup"

dentonmac's LCC Shaftsman - Pic Heavy
 

What...no cherry? Man you guys are rough!

Well I got pix for you anyways. Not good pix but there is a lot going on. I have a comparison shot of the cased MMP (ET-3s), decased MMP, Tekin RS, Tekin FXR. And a pix of a cased MMP next to the decased one.

http://img.tapatalk.com/d/14/04/25/4uduzudy.jpg

http://img.tapatalk.com/d/14/04/25/hepusara.jpg

There is a pretty drastic size difference. If you decase the MMP be sure to shrink wrap it or cover the bottom somehow. I didn't (stupid, I know) and blew it. Totally my fault.

You could take the heat sink off the top, but I couldn't muster the cojanas to try it.

Let me know if this is what you are wanting to see.

I did this once. Once. Once. Oh yeah, once.........fail..........:ror:

It made really crazy noises after and some nifty smoke show though!

Thanks :thumbup:
That is what I wanted to see :D
I hope this is same with a MMP 1cell :)

Regards,
Jeff