Knuckle weights and steering links 4 Attachment(s) I can not believe I am about to release a product for the Losi Comp Crawler! Truth be told, I have always wanted to make these so just a little push was all it took. I am glad I did too as I really think they turned out great. These knuckles have a bigger than stock outer bearing that measures 5x13 and use a 6x12 inner bearing. This will add reliability. Top that off with bearings in the kingpins, proper length steering arms, proper ackerman, knuckle weight and strength and you will see that these are an obvious choice. You use stock C hubs. The only mod you will need to do to get these to fit is to trim the length of the stock kingpin down a hair so it does not rub the CVD. An all brass knuckle is shown but you can get them in any material just like the other knuckles I make. Pricing is on my website. I have the pair shown that I can send today. All other orders will take approx 2 weeks as I will need to wait and make them in a batch. https://dluxfab.ecwid.com/#!/Knuckle...tegory=6232191 Steering links also available https://dluxfab.ecwid.com/#!/LCC-Ste...nks/p/67907189 |
Re: Knuckle weights and steering links I thought I saw LCC was an option |
Re: Knuckle weights and steering links Ordered good sir! Can't weight to try these out! (Pun intended) lol Sent from my SM-N900V using Tapatalk |
Re: Knuckle weights and steering links Thanks man! I will get on them! |
Re: Knuckle weights and steering links Nice Sent from my iPhone using Tapatalk |
Re: Knuckle weights and steering links Just ordered knuckles and a few others for my comp crawler, dasco recommended you Sent from my SM-G930V using Tapatalk |
Re: Knuckle weights and steering links Quote:
Sent from my HTC One M9 using Tapatalk |
Re: Knuckle weights and steering links Thanks for the good words guys! I have the order together, I just need to make the knuckles since I dont normally stock the LCC knuckles. It will be a little bit more and then I will get it all out for you. |
Re: Knuckle weights and steering links Talk about perfect timing!! I just got my LCC in ze mail. I bet you can't guess what I'm ordering next!"thumbsup""thumbsup""thumbsup" Cheers, Nasty |
Re: Knuckle weights and steering links If youre ordering these, you should order them ASAP. I am about to make a batch and it would help avoid the wait. |
Re: Knuckle weights and steering links Quote:
And by the way, I get some of my parts /products from Erik, mainly because he has great prices and a great guy to work with.;-);-) Ernie |
Re: Knuckle weights and steering links Thanks for the good words Ernie. Youre a good guy! |
Re: Knuckle weights and steering links Anyone built a set of these yet?..I can't seem to get the king pin to center ..there is a lot of room around it. I know the little tab goes on top to capture the king pin..I left it off for a referencehttps://uploads.tapatalk-cdn.com/201...9e11d7af5c.jpg This is the third set of Dlux knuckles I've built and haven't had this issue...is there supposed to be pillow balls that surround the king pin?..a build thread or any info would be helpful..thx fellas Sent from my HTC One M9 using Tapatalk |
Re: Knuckle weights and steering links Quote:
knuckle install at 1:01:30. link is on Eriks site. Hope it helps.:roll: Ernie |
Re: Knuckle weights and steering links Quote:
Sent from my HTC One M9 using Tapatalk |
Re: Knuckle weights and steering links Quote:
I got some specialness happening. I just need c hubs and a axle housing... Sent from my SM-G935V using Tapatalk |
Re: Knuckle weights and steering links Just wanted to show Erik's Weighted knuckles on a XR width modified Losi axle. This one has a clamping style C-hub, and the axle weighs in at 460 grams. http://i1264.photobucket.com/albums/...2-IMG_7858.jpg http://i1264.photobucket.com/albums/...3-IMG_7859.jpg Nice product Erik!!!"thumbsup" Ernie |
Re: Knuckle weights and steering links Top work Ernie...super clean Sent from my HTC One M9 using Tapatalk |
Re: Knuckle weights and steering links Wow! That setup is super legit Ernie! |
Re: Knuckle weights and steering links Ok Erik, here is your knuckles on the new VP Ascender Currie axle. I just finished the formula for marrying these today. http://i1264.photobucket.com/albums/...4-IMG_8029.jpg Couldn't use all of that could you? http://i1264.photobucket.com/albums/...5-IMG_8030.jpg Got her mounted up this afternoon. http://i1264.photobucket.com/albums/...7-IMG_8032.jpg http://i1264.photobucket.com/albums/...8-IMG_8033.jpg http://i1264.photobucket.com/albums/...9-IMG_8034.jpg And a look from under side. http://i1264.photobucket.com/albums/...1-IMG_8037.jpg "thumbsup" Ernie |
All times are GMT -6. The time now is 05:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com