Go Back   RCCrawler Forums > RCCrawler Brand Specific Tech > Team Losi Comp Crawler
Loading

Notices

Thread: Where do I go from here?

Reply
 
LinkBack Thread Tools Display Modes
Old 06-06-2019, 05:33 AM   #181
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Quote:
Originally Posted by mikro383 View Post
That's good it doesn't change, the chassis I used did and I could never get my link geometry where it wouldn't and I'd get the dreaded worm stall, had to use dig a lot just to settle it out, still have it in pieces been thinking of putting it back together with the stock chassis just for old times sake, had fun competing against XR's in pro class, only scale comps around Colorado anymore I could just make it a scaler.

Sent from my SM-G930V using Tapatalk
It seem the scaler is taking over . Most of my area is scaler too western PA
Rattzo1 is offline   Reply With Quote
Sponsored Links
Old 06-06-2019, 12:13 PM   #182
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Ok one last big order for this one and it’ll be gtg.i should have my Dlux knuckles ,Ottsix pins , CI comp cut 2stage foams and body by Saturday. Last order will be the biggest motor esc and servo that’s gonna hurt lol. May have to break that one into two orders lol.
Rattzo1 is offline   Reply With Quote
Old 06-09-2019, 07:24 PM   #183
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Got some of my stuff this weekend. But I ran into a few issues. My new shafts I had Dlux make me are well just to big diameter for codyboys beeftubes so I’m going to try to pick up where robbob left off when he first started his losi build. And I’m also ordering a housing from CM9000 because I’m a fugin idiot and I’m sure I will fugg this mod all up so at least I’ll have a back up when mine goes completely wrong. But this is where I’ve got it too so far
Attached Images
   

Last edited by Rattzo1; 06-09-2019 at 09:21 PM.
Rattzo1 is offline   Reply With Quote
Old 06-09-2019, 07:27 PM   #184
Rock Stacker
 
Join Date: Jan 2017
Location: Bakersfield
Posts: 86
Default Re: Where do I go from here?

What do you mean by to high?


Live it love it crawl it
tjsnyder is offline   Reply With Quote
Old 06-09-2019, 09:20 PM   #185
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Edit : too big
Rattzo1 is offline   Reply With Quote
Old 06-12-2019, 11:12 AM   #186
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Here’s a few shots of my comp crawler so far . I know this isn’t part of my build but I’m working on it while I’m throwing a fit about my sporty. Going to put my pit bulls on it and my vp slw ‘s when I get some carbon fiber wheels for my sporty. Im also going to run my goat3s on it 18.5t with a 14 t pinion for starters and adjust from there. Once I get these two done im going to build another night crawler using all losi stuff . Like all but links steering and electronics the rest will be losi.
Attached Images
  
Rattzo1 is offline   Reply With Quote
Old 06-12-2019, 04:25 PM   #187
Quarry Creeper
 
Join Date: Nov 2008
Location: grand junction
Posts: 305
Default Re: Where do I go from here?

I know you made yours, but I miss my DMG topper should have never sold it but i dont think it was comp legal.

Sent from my SM-G930V using Tapatalk
mikro383 is offline   Reply With Quote
Old 06-12-2019, 06:33 PM   #188
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Quote:
Originally Posted by mikro383 View Post
I know you made yours, but I miss my DMG topper should have never sold it but i dont think it was comp legal.

Sent from my SM-G930V using Tapatalk
I scraped the one I started it was steel and got real heavy. This is a DMG topper I just got off DMG a few weeks ago
Rattzo1 is offline   Reply With Quote
Old 06-13-2019, 06:38 PM   #189
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Idk if you saw it or not Tib but they had some 40t main gears for the comp crawler on eBay got mine from RC express http://www.ebay.com/itm/382656535709
Rattzo1 is offline   Reply With Quote
Old 06-13-2019, 07:02 PM   #190
Tib
Pebble Pounder
 
Join Date: Mar 2016
Location: Harrisburg/York
Posts: 128
Default Re: Where do I go from here?

Quote:
Originally Posted by Rattzo1 View Post
Idk if you saw it or not Tib but they had some 40t main gears for the comp crawler on eBay got mine from RC express http://www.ebay.com/itm/382656535709


I didn’t see that. Thanks for sharing.


Sent from my iPhone using Tapatalk
Tib is offline   Reply With Quote
Old 06-14-2019, 05:38 AM   #191
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Quote:
Originally Posted by Tib View Post
I didn’t see that. Thanks for sharing.


Sent from my iPhone using Tapatalk
Sure. I wasn’t 100% sure you were wanting that gear or not but I was pretty sure you mentioned it before
Rattzo1 is offline   Reply With Quote
Old 06-23-2019, 05:28 PM   #192
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Waiting sux ! Waiting for my front housing from Anthony. Have a few more things coming tomorrow for the CCR and still pondering electronics. I know worm axles like brushless but I’m not sure if I want that. I like the low speed control feel of brushed motors. That and HH already sells the smashed esc , but I like the reliability of brushless never have to breake them in and these newer cans you barely need to clean them . So I’m not really sure what way yet ! Guess we will see. Probably gonna go with the puller team 500 11t and the mini esc . Or the puller pro 3700 and don’t know what esc yet .
Rattzo1 is offline   Reply With Quote
Old 06-23-2019, 05:57 PM   #193
I wanna be Dave
 
Join Date: Feb 2009
Location: Detroit
Posts: 2,075
Default Re: Where do I go from here?

I just ordered a puller pro stubby 2700kv to try out on 4s and 6s. And yes, waiting does suck! But thankfully shapeways is quick.

Usually about a week and a half at the most for parts to show up at my door so i can get them packaged up and sent back out.

Sent from my LGMP260 using Tapatalk
CM9000 is offline   Reply With Quote
Old 06-24-2019, 10:38 PM   #194
Newbie
 
Join Date: Jul 2017
Location: Redding, CA USA
Posts: 14
Default Re: Where do I go from here?

I'm running a lower KV OutRunner with the Mamba x ESC. I've tried many different combos and settled on this one. Runs excellent and very good control. I love the startup sound these ESC's make, Castle did an excellent job on the hardware and software. Data logging and rock race/crawler mode is what sold me on my first one. I now run these in all my rigs.

Sent from my Lenovo YT3-850F using Tapatalk
roaoro is offline   Reply With Quote
Old 06-26-2019, 07:35 PM   #195
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

How heavy is your truck? I’m going for 4.5 lbs super lite then I can put all the weight where I need it .

Well I kinda finished the front housing so here’s a pic or two
Attached Images
   
Rattzo1 is offline   Reply With Quote
Old 06-30-2019, 01:46 PM   #196
Newbie
 
Join Date: Jul 2017
Location: Redding, CA USA
Posts: 14
Default Re: Where do I go from here?

4.5 # should be easy to hit. Mine, as seen, is @ 4#12oz. That's with all the extras and weighted wheels in front.
roaoro is offline   Reply With Quote
Old 07-01-2019, 04:05 PM   #197
I wanna be Dave
 
Join Date: Feb 2009
Location: Detroit
Posts: 2,075
Default Re: Where do I go from here?

The front axle you will receive, from chub to chub complete with shafts in, should weigh a little less than stock front chub to chub.
CM9000 is offline   Reply With Quote
Old 07-01-2019, 07:08 PM   #198
Quarry Creeper
 
Join Date: Jan 2018
Location: East brady
Posts: 222
Default Re: Where do I go from here?

Awsome ty Anthony
Rattzo1 is offline   Reply With Quote
Old 07-03-2019, 10:49 AM   #199
Newbie
 
Join Date: Jul 2017
Location: Redding, CA USA
Posts: 14
Default Re: Where do I go from here?

I've been wanting to get a bit more clearance, and notice a lot of people use the "bent" lower links. What size links would I look for? I'm assuming everyone's bending them themselves, and would need to be slightly longer then stock (using stock frame)?
roaoro is offline   Reply With Quote
Old 07-03-2019, 04:21 PM   #200
I wanna be Dave
 
Join Date: Feb 2009
Location: Detroit
Posts: 2,075
Default Re: Where do I go from here?

Quote:
Originally Posted by roaoro View Post
I've been wanting to get a bit more clearance, and notice a lot of people use the "bent" lower links. What size links would I look for? I'm assuming everyone's bending them themselves, and would need to be slightly longer then stock (using stock frame)?
On my latest "time only build" I used C.I. low clearance bent delrin links in the rear. But! I would however recommend Dlux losi comp crawler link kit as well. simply because you wouldn't have to make the uppers and they are a direct fit.

if you want to make your own, I would get some 4mm Ti for lowers and thread them for 8-32 thread. the uppers I would sleeve 3mm stainless with some thin wall aluminum.
CM9000 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com