Losi super night crawler This wont be the first super losi, but the first super sized losi night crawler. Since nearing completion of my superclass losi rig, I have decided to start on the centerpiece of this project. Started with a 1 piece wraith trans output gear from robinson racing. Ended up with this after a few hours on the lathe and some time on the drill press. This will be a slow build as well, but i have already accumulated 2 sets of wheels and tires for this rig. Going in between a krazed builds unstuck v1 rail set is this little do-hickey-spinner-teeth-shafty. .https://uploads.tapatalk-cdn.com/201...f9dcee07ac.jpg Sent from my LGMP260 using Tapatalk |
Re: Losi super night crawler Looks interesting and clean so far Live it love it crawl it |
Re: Losi super night crawler I guess ill watch lol cant wait to see what you come up with! |
Re: Losi super night crawler ** Watching :mrgreen: |
Re: Losi super night crawler I was going to pick between 3 idler gears, xr10 gear (not shown, does not need to be machined), a drive gear from the og ax10 trans, or the random idler gear on the bottom left.. I thought it was a metal axial idler.. But the bearing pocket after I spun it on the lathe, I found out was not metric. Drive gear is to small, plus the bearings would be about the same size, that would interfere with a 14t or smaller pinion. So.... Im going to go with a xr10 trans gear. I think its the 25t gear that is seperate of the shafts. Its going to work, I hope I can stick the gear low between the pinion and power gear. .https://uploads.tapatalk-cdn.com/201...b41c3ffa24.jpg Sent from my LGMP260 using Tapatalk |
Re: Losi super night crawler Interesting . watching "thumbsup" |
Re: Losi super night crawler changed my mind. doing portals instead. no trans. and this eflite motor is the right size for an external sensor board. cant wait to get my parts back. https://uploads.tapatalk-cdn.com/202...cf8a855f60.jpg https://uploads.tapatalk-cdn.com/202...34d654be44.jpg https://uploads.tapatalk-cdn.com/202...ebd5491ef5.jpg Sent from my LGMP260 using Tapatalk |
Re: Losi super night crawler Woo-hoo!!! |
Re: Losi super night crawler Looks cool so far! ... I kinda want a Losi night crawler. "thumbsup" |
Re: Losi super night crawler Whatever happened to this? |
Re: Losi super night crawler Quote:
i have tires for it right now and picked up some Kyosho 30:1 worm gears to pair with portals. axle housing design will be soon. |
Re: Losi super night crawler I'm not sure where you are going with this, but since I got into rock crawling I've wanted to build a shafty super. I forgot about it for a while but after buying an old super recently with worm drive axles I'm thinking about it again. idk if we are thinking anything alike but I'm interested in what you come up with. I need to figure out what 5mm shafts are fat enough on the ends to machine some tangs that fit the lockers, but that should not be too hard. I might end up going with Dlux shafts. |
Re: Losi super night crawler Quote:
kyosho worm gears dont use a locker. the spool uses a set screw to secure it to the shaft that holds the dogbone cups. whats this old super with worm drives look like? |
All times are GMT -6. The time now is 01:07 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com