RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Team Losi Comp Crawler (http://www.rccrawler.com/forum/team-losi-comp-crawler/)
-   -   Rebirth from the ashes of a beater (http://www.rccrawler.com/forum/team-losi-comp-crawler/615766-rebirth-ashes-beater.html)

jokers_toys 02-18-2020 05:39 PM

Rebirth from the ashes of a beater
 
This will be my slow build thread for my losi night crawler "parts" looking to make a scale-ish basher.

Step
1. Get hand full of Random parts. (Free)
2. Tear it apart
3. Start getting new parts
4. Now let's go to the local hobby shop and find more parts.

To be continued [emoji1787]https://uploads.tapatalk-cdn.com/202...632243b34d.jpghttps://uploads.tapatalk-cdn.com/202...dfc1ac643e.jpghttps://uploads.tapatalk-cdn.com/202...4078f53ed9.jpg

Sent from my moto g(7) supra using Tapatalk

jokers_toys 02-20-2020 05:39 PM

Re: Rebirth from the ashes of a beater
 
Anyone ever run a slightly dropped tranny and motor? Try to fit the losi trans best on that 10.2 frame. https://uploads.tapatalk-cdn.com/202...654a8867fd.jpg

Sent from my moto g(7) supra using Tapatalk

jokers_toys 02-22-2020 06:26 PM

Re: Rebirth from the ashes of a beater
 
One custom skid fitted. Now to trim up and make it look nice.

Moving on... Moving forward....https://uploads.tapatalk-cdn.com/202...1034bfb83d.jpghttps://uploads.tapatalk-cdn.com/202...afd4cab13d.jpg

Sent from my moto g(7) supra using Tapatalk

jokers_toys 02-22-2020 08:19 PM

Re: Rebirth from the ashes of a beater
 
Cleaned up and 12.5 wheel base https://uploads.tapatalk-cdn.com/202...96191307f0.jpghttps://uploads.tapatalk-cdn.com/202...c1065b0802.jpghttps://uploads.tapatalk-cdn.com/202...f523d9246b.jpghttps://uploads.tapatalk-cdn.com/202...74159f453c.jpg

Sent from my moto g(7) supra using Tapatalk

jokers_toys 02-23-2020 01:08 PM

Re: Rebirth from the ashes of a beater
 
So ran in to one small issue test fitting the front servo is there a easy fix? Spacer, longer arm, ect https://uploads.tapatalk-cdn.com/202...7422785248.jpghttps://uploads.tapatalk-cdn.com/202...68c619da23.jpg

Sent from my moto g(7) supra using Tapatalk

bbrigg 02-23-2020 05:51 PM

Re: Rebirth from the ashes of a beater
 
There are a lot of servo arms with different offsets. A quick browse on fleabay came up with these. Plenty more to choose from. You could also put spacers on the servo if that's how you want to go. https://uploads.tapatalk-cdn.com/202...a5015d6dd1.jpghttps://uploads.tapatalk-cdn.com/202...81eba600af.jpg

TheLetterJ 02-23-2020 09:59 PM

Re: Rebirth from the ashes of a beater
 
The servo horn meant for a Losi Baja Rey has a pretty good step in it too, though it may not have the total length you're after. Search for "offset servo horn", here's one example : https://www.amainhobbies.com/losi-ba...SABEgJbt_D_BwE


All times are GMT -6. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com