Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs holy smokes! im so sorry!:oops: i didnt even read! i didnt realize there was a vendor doing this. i thought this was a group thread of people moding there own wheels for personal use! im so sorry:oops:, i would never jab at a fellow RCC vendor:oops: link promtly removed! sorry for the troubles, i should have taken the time to read:oops: i PMed appologies to you both! |
Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs Hi could u tell me wot size hub to use with the b44 wheel with a burg as I have loads of b44 rims at least by doing that mod they will not go to waste as they all have rounded of from racing thanks |
Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs i was using 225 hubs on my b44 wheels on my bully axles that had dlux berg width tubes. i can get a measurement of outside tire to outside tire if you want. |
Re: Drill press rim mod's with VP hubs wow what agreat thread here for hand made wheels i will be saving this one to further my skills ....great job thanks |
Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs Mr. V!!! Torchedcycle just showed me this tread and Im blown away!! "thumbsup""thumbsup" Im such a DIY guy and you have enabled my "Tinkering" addiction!! I saw you had posted about trying some SUPER wheels too! Im subscribed and looking forward to your write up on those! I just bought JeepSoHigh's SUPER Juice Bully at ECC this April and I LOVE THAT CLASS!! For the meantime im going to go buy some hole saw bits and get to tinkering!! Have a great Christmas and New Years!! Cheers, James T. |
Re: Drill press rim mod's with VP hubs Welp.... Im ready to start tinkering!!!!! I still have a few things to get; spacers, rear beadlock rings, and some VP hubs but for now I'm just gonna practice making the rings! Thanks again Mr. Vertical for this HowTo!!! http://i1192.photobucket.com/albums/...ps875c02fd.jpg |
Re: Drill press rim mod's with VP hubs just wondering if anyone is using these wheels with losi boss claws? I am have some difficulties with mounting them up, I think i need to cut down the webbing in the tire but i dont want to screw anything up. |
Quote:
Sent from my DROID RAZR using Tapatalk 2 |
Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs Boss Claws are really hard to mount up here are some tips that will help you. You will need some soap & water just a little soap and some Q-tip i'll let the pics do the talken. P.S bolt the face on then do the back side. http://i609.photobucket.com/albums/t...g?t=1359693486 http://i609.photobucket.com/albums/t...g?t=1359693390 http://i609.photobucket.com/albums/t...g?t=1359693360 http://i609.photobucket.com/albums/t...g?t=1359693324 |
Re: Drill press rim mod's with VP hubs will the drill press mod and vp hubs work with a stock xr10 wheel ? |
Re: Drill press rim mod's with VP hubs Quote:
I'm tryna run XR10 wheels on a set of TLT axles, and it DOES work (with wideners), but I need just a hair more width up front to clear my links/servo/battery. Any ideas? |
Re: Drill press rim mod's with VP hubs Mr V, Great thread. I was wondering what size the hole saws are needed for super wheels? It's the same process as 2.2, just BIGGER. Yes?"thumbsup" |
Re: Drill press rim mod's with VP hubs Great work thanks for sharing the infor |
Re: Drill press rim mod's with VP hubs I see you use a 15/32 drill bit and ream it out a little. Have you tried a 31/64 bit or is it too large. I'm using plastic wheels. Thanks Matt |
Re: Drill press rim mod's with VP hubs have anybody use this mod on 3s lipo on basher or crawlers rigs? scalers, crawlers or go-fast rigs? how will hold the power of a 13.5 BL combo? |
All times are GMT -6. The time now is 02:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com