Drill press rim mod's with VP hubs

[4xFord]

Originally Posted by STANG KILLA SS

no more modding needed!
TSS new "Chameleon" 1.9 beadlocks use VP hubs!
http://www.rccrawler.com/forum/vendo...2n1-looks.html

Dude, dont advertise in Mr. V's thread. He is a vendor and sells the wheels he puts in this thread. Also, there have been plenty of wheels that take vp hubs available for a while, this is more for guys that want a DIY method.

[STANG KILLA SS]

holy smokes! im so sorry! i didnt even read! i didnt realize there was a vendor doing this. i thought this was a group thread of people moding there own wheels for personal use! im so sorry, i would never jab at a fellow RCC vendor

link promtly removed!
sorry for the troubles, i should have taken the time to read

i PMed appologies to you both!

[4xFord]

Originally Posted by STANG KILLA SS

holy smokes! im so sorry! i didnt even read! i didnt realize there was a vendor doing this. i thought this was a group thread of people moding there own wheels for personal use! im so sorry, i would never jab at a fellow RCC vendor

link promtly removed!
sorry for the troubles, i should have taken the time to read

i PMed appologies to you both!

No need to apologize to me man. Even if he wasn't selling them a scale wheel that takes a vp hub isn't really what this thread is about.

[Welsh wizad]

Hi could u tell me wot size hub to use with the b44 wheel with a burg as I have loads of b44 rims at least by doing that mod they will not go to waste as they all have rounded of from racing thanks

[MR.VERTICAL]

Originally Posted by Welsh wizad

Hi could u tell me wot size hub to use with the b44 wheel with a burg as I have loads of b44 rims at least by doing that mod they will not go to waste as they all have rounded of from racing thanks

They need 700 VP hubs you could use smaller hubs with some of the spacers i sell,pm me for price on spacers.

[ohh EPiC FAiL]

i was using 225 hubs on my b44 wheels on my bully axles that had dlux berg width tubes. i can get a measurement of outside tire to outside tire if you want.

[scorpion_ax]

wow what agreat thread here for hand made wheels i will be saving this one to further my skills ....great job thanks

[MR.VERTICAL]

Originally Posted by scorpion_ax

wow what agreat thread here for hand made wheels i will be saving this one to further my skills ....great job thanks

Glad i could help post up when when you get some done

[JimmyJam]

Mr. V!!! Torchedcycle just showed me this tread and Im blown away!! Im such a DIY guy and you have enabled my "Tinkering" addiction!! I saw you had posted about trying some SUPER wheels too! Im subscribed and looking forward to your write up on those! I just bought JeepSoHigh's SUPER Juice Bully at ECC this April and I LOVE THAT CLASS!! For the meantime im going to go buy some hole saw bits and get to tinkering!! Have a great Christmas and New Years!!

Cheers,
James T.

[JimmyJam]

Welp.... Im ready to start tinkering!!!!! I still have a few things to get; spacers, rear beadlock rings, and some VP hubs but for now I'm just gonna practice making the rings! Thanks again Mr. Vertical for this HowTo!!!

[grunt95]

just wondering if anyone is using these wheels with losi boss claws? I am have some difficulties with mounting them up, I think i need to cut down the webbing in the tire but i dont want to screw anything up.

[mikro383]

Originally Posted by grunt95

just wondering if anyone is using these wheels with losi boss claws? I am have some difficulties with mounting them up, I think i need to cut down the webbing in the tire but i dont want to screw anything up.

O man don't tell me that I've got rovers and they hold awesome but was wanting to try boss claws

Sent from my DROID RAZR using Tapatalk 2

[CodyCrawler]

Originally Posted by JimmyJam

Welp.... Im ready to start tinkering!!!!! I still have a few things to get; spacers, rear beadlock rings, and some VP hubs but for now I'm just gonna practice making the rings! Thanks again Mr. Vertical for this HowTo!!!

How much did this stuff cost you. I'm trying to decide if I buy a set from Mr. V or make my own

[MR.VERTICAL]

Boss Claws are really hard to mount up here are some tips that will help you. You will need some soap & water just a little soap and some Q-tip i'll let the pics do the talken.
P.S bolt the face on then do the back side.

[CrazyCrawler316]

will the drill press mod and vp hubs work with a stock xr10 wheel ?

[grob23]

Originally Posted by CrazyCrawler316

will the drill press mod and vp hubs work with a stock xr10 wheel ?

I too am curious. Looking at my XR10 wheels, it looks like there wouldn't be enough material to drill. I think one could grind down where the hex goes and make an even surface. I don't have a drill press (or any fancy bits. or any hubs. or anything really...) or I'd give it a go.

I'm tryna run XR10 wheels on a set of TLT axles, and it DOES work (with wideners), but I need just a hair more width up front to clear my links/servo/battery. Any ideas?

[lead lobber]

Mr V, Great thread. I was wondering what size the hole saws are needed for super wheels? It's the same process as 2.2, just BIGGER. Yes?

[bdth9447]

Great work thanks for sharing the infor

[SDheavymetal]

I see you use a 15/32 drill bit and ream it out a little. Have you tried a 31/64 bit or is it too large. I'm using plastic wheels.
Thanks Matt

[Steelfish]

have anybody use this mod on 3s lipo on basher or crawlers rigs?
scalers, crawlers or go-fast rigs?

how will hold the power of a 13.5 BL combo?