Re: Drill press rim mod's with VP hubs This will be a mod you all will love so dig out those old AXIAL 2.2 rim.Hear is a few pics i will have the how to photos up later today so i hope you did'nt throw out your old rims. http://i609.photobucket.com/albums/t...g?t=1334591246 http://i609.photobucket.com/albums/t...g?t=1334591270 http://i609.photobucket.com/albums/t...g?t=1334591296 |
Re: Drill press rim mod's with VP hubs very good idea. So drill out the stock back ring for 3mm and make a new front face correct? and add in the spacers for the width you want too. |
Re: Drill press rim mod's with VP hubs Quote:
Yep thats it,heading over there now to make up a few sets."thumbsup" |
Re: Drill press rim mod's with VP hubs All right here we go first drill out the old holes to 1/8 http://i609.photobucket.com/albums/t...g?t=1334597061 Then cut out the center. http://i609.photobucket.com/albums/t...g?t=1334597058 http://i609.photobucket.com/albums/t...g?t=1334597054 Next i use a cut off wheel for a dremal you can get at the hardware store. http://i609.photobucket.com/albums/t...g?t=1334597051 http://i609.photobucket.com/albums/t...g?t=1334597047 |
Re: Drill press rim mod's with VP hubs So fare so good. http://i609.photobucket.com/albums/t...g?t=1334597043 To make sure it's flat i use a milling bet. http://i609.photobucket.com/albums/t...g?t=1334597039 The next step you'll need a 2 5/8 hole saw. http://i609.photobucket.com/albums/t...g?t=1334597036 Make sure your drill is at low speed . http://i609.photobucket.com/albums/t...g?t=1334597032 Then take your old rings clap it to the new ring and use a 1/8 drill ,drill them out at the same time after you drill one hole use a old 3mm to keep it lined up. http://i609.photobucket.com/albums/t...g?t=1334597029 http://i609.photobucket.com/albums/t...g?t=1334597025 http://i609.photobucket.com/albums/t...g?t=1334597021 http://i609.photobucket.com/albums/t...g?t=1334597018 |
Re: Drill press rim mod's with VP hubs For the next step mount your new ring to a piece of wood.Then you need a 15/32 drill bet to drill out the new ring to fet the slw hub.dhttp://i609.photobucket.com/albums/t...g?t=1334597014 http://i609.photobucket.com/albums/t...g?t=1334597011 http://i609.photobucket.com/albums/t...g?t=1334597007 Now take your body reemer just to make it fet just right. http://i609.photobucket.com/albums/t...g?t=1334597003 http://i609.photobucket.com/albums/t...g?t=1334596999 http://i609.photobucket.com/albums/t...g?t=1334596996 |
Re: Drill press rim mod's with VP hubs I have a doner hub for this,drill it out to 1/8. http://i609.photobucket.com/albums/t...g?t=1334596992 http://i609.photobucket.com/albums/t...g?t=1334596988 Now you have all the part you need you can use axial spacers of cut out some delrin or aluminum. http://i609.photobucket.com/albums/t...g?t=1334596982 http://i609.photobucket.com/albums/t...g?t=1334546484 http://i609.photobucket.com/albums/t...g?t=1334546457 http://i609.photobucket.com/albums/t...g?t=1334546457 http://i609.photobucket.com/albums/t...g?t=1334546431 And there you have it . |
Re: Drill press rim mod's with VP hubs What kinda knuckles are these??? Quote:
|
Re: Drill press rim mod's with VP hubs I beleave those are called portols. Got a full set done today. http://i609.photobucket.com/albums/t...g?t=1334631080 |
Re: Drill press rim mod's with VP hubs |
Re: Drill press rim mod's with VP hubs Those came out killer!"thumbsup" |
Re: Drill press rim mod's with VP hubs This is a really awesome Tech thread! Thanks for making it! P.S. You sure its a 2-5/8" hole saw and not a 2-3/8" hole saw?? 2-5/8" seems awfully big for a 2.2 disk. |
Re: Drill press rim mod's with VP hubs Quote:
Turbo... hole saw's are measured outside to outside of the teeth... and take about 3/16" cut out of the material, so you are left with less than the hole saw's outer measurement......... that would be my guess why that size...... |
Re: Drill press rim mod's with VP hubs Thanx Mike your right on the money"thumbsup" |
Re: Drill press rim mod's with VP hubs Those are very cool man. Nice work |
Re: Drill press rim mod's with VP hubs those look just like D_lux wheels now :shock: ........bob .... |
Re: Drill press rim mod's with VP hubs Nah, I knew they were measured for O.D., I just didnt realize they took off that much material between I.D and O.D. Thanks for the clarification. |
Re: Drill press rim mod's with VP hubs Quote:
|
Re: Drill press rim mod's with VP hubs Sweet! 1.9 rims would be pretty dope"thumbsup" |
Did I miss it? What material and how thick are you using for the hub face/outer beadlock? |
All times are GMT -6. The time now is 01:23 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com