07-19-2012, 10:34 PM | #161 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
A few more. |
Sponsored Links | |
07-19-2012, 10:36 PM | #162 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: Drill press rim mod's with VP hubs
Very nice work |
07-20-2012, 05:59 PM | #163 |
MFDesigns Join Date: Feb 2009 Location: ValleHOE
Posts: 672
| Re: Drill press rim mod's with VP hubs
nice work mr. vert, where is my 1.9 wheels? |
07-20-2012, 09:40 PM | #164 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs Here you go Mike all you need is some 1/4in material then follow the pics this is for 1.9 inner ring and spacers. First you need 15/32 drill.AFTER you drill the hole slide the table up lock it in place then take the bit out from the bottom. that way everthing stay lined up. Then put in a 1 1/8 hole saw. one spacer. then the 1 1/2 remember all you have to do is unscrew one put on one. Then the 2 1/8 set at 5mm for the bead ring. Then the 2 1/2 for the end cut. Then i mill off 2.5mm off the out side. And there you have it one spacer and one 1.9 inner ring. Last edited by MR.VERTICAL; 07-20-2012 at 11:05 PM. |
07-20-2012, 09:44 PM | #165 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs |
07-22-2012, 11:50 AM | #166 |
Rock Crawler Join Date: Mar 2011 Location: sebastopol
Posts: 910
| Re: Drill press rim mod's with VP hubs
Nice work Tim! looks like you've been busy as usual.We need to get Jerry onboard with some orange 2.2's for his build I'm doing for him. |
07-22-2012, 07:11 PM | #167 |
Pebble Pounder Join Date: Sep 2011 Location: Albuquerque
Posts: 153
| Re: Drill press rim mod's with VP hubs
How do you color them? Noob question Im sure but THinking about making some of these...
|
07-23-2012, 08:30 AM | #168 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs |
07-26-2012, 08:53 AM | #169 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
MR. Frikenwoodro you could use any tamiya or pactra colors to paint the inside of the faces |
07-27-2012, 11:11 AM | #170 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
Here is a set of white open air rims |
07-29-2012, 10:29 PM | #171 |
Status...ADDICTED! Join Date: Jun 2011 Location: Cardboard Box
Posts: 497
| Re: Drill press rim mod's with VP hubs
Decided to play around with the wheels that came on the New Bright toy grade I bought. I drilled a 1/2" hole in the center and then removed the raised portion with a Forstner bit on the drill press. Kinda cool but a little large at 2.8" they prob won't make it onto a crawler anytime soon. RC4WD 6 lug steelie hubs. Still have to drill the holes for the hub screws and nuts. Last edited by ceedawwg; 07-29-2012 at 10:52 PM. |
07-29-2012, 10:36 PM | #172 |
RCC Addict Join Date: Jun 2010 Location: Australia NSW
Posts: 1,266
| Re: Drill press rim mod's with VP hubs
superclass FTW!!! ^^^ just for my info, could you stretch on a 2.2 tire ?? |
07-29-2012, 10:51 PM | #173 |
Status...ADDICTED! Join Date: Jun 2011 Location: Cardboard Box
Posts: 497
| Re: Drill press rim mod's with VP hubs
^^^Yup! 2.2 Moab is pretty happy on them |
07-30-2012, 08:29 AM | #174 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
Those look cool and that bit is a little scary looken .
|
07-30-2012, 08:31 AM | #175 |
RCC Addict Join Date: Jun 2010 Location: Australia NSW
Posts: 1,266
| Re: Drill press rim mod's with VP hubs
wow, that does look good me want a set! what did ya say they came off?
|
07-30-2012, 02:06 PM | #176 |
Status...ADDICTED! Join Date: Jun 2011 Location: Cardboard Box
Posts: 497
| Re: Drill press rim mod's with VP hubs
I think it may have been a Maisto truck. I thought at first they were from my New Bright LR3 but pics confirmed otherwise. I'm gonna look and see if took any pics of it...stby. Found It... http://www.hobbytron.com/MaistoFordS...TRRCTruck.html Out of stock unfortunately Last edited by ceedawwg; 07-30-2012 at 03:27 PM. |
08-02-2012, 10:40 AM | #177 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
I have over stock |
08-02-2012, 10:53 AM | #178 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Drill press rim mod's with VP hubs
Wanna send them to me?
|
08-04-2012, 11:10 PM | #179 |
I wanna be Dave Join Date: Nov 2008 Location: Too old to care
Posts: 2,446
| Re: Drill press rim mod's with VP hubs
Some time next week i'll be doing up some wheel for you super rigs |
08-09-2012, 07:25 AM | #180 |
Quarry Creeper Join Date: Nov 2008 Location: grand junction
Posts: 309
| Sent from my DROID RAZR using Tapatalk 2 |
LinkBacks (?)
LinkBack to this Thread: http://www.rccrawler.com/forum/tires-wheels/355148-drill-press-rim-mods-vp-hubs.html | ||||
Posted By | For | Type | Date | |
Recent Posts | This thread | Refback | 02-19-2013 01:48 AM | |
Pisen säfti "Eric's son, the Ridge" | This thread | Refback | 02-19-2013 12:24 AM |
Drill press rim mod's with VP hubs - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
anyone have tips on a drill press | j-bird | Tools, and Procedures | 11 | 09-20-2011 07:16 PM |
Milling with a drill press? | Pete from Houston | Tools, and Procedures | 24 | 08-04-2009 09:14 AM |
Drill Press Chuck | Racefan1115 | Tools, and Procedures | 6 | 07-27-2006 07:41 AM |
Help With Drill Press | onefstsnake | Tools, and Procedures | 9 | 09-14-2005 07:24 PM |
Thread Tools | |
Display Modes | |
| |