Wheel Pics - No talking

[bagged86]

Ok here's my new set for the micro BWD wheels and one off (for now) from Don

[AxialJeepster]

oh i should have checked on this post b4 i posted them wheels up.. also I know you an wheels..my bad...

I think they alsmost look like a 1:1 indwheels or some kind of racing car wheel.

Im getting a couple more sets and going to have MThead make me some bad azz rings for them!! send him the wheels.


and moree.... SORRY SOME ARE ON THE RIGS









CUSTOM MADE 2 SIDED 1.9 STEEL. THESE HAVE VP SLW .425 HUBS AND SS HARDWARE.

[pmadrid13]

Hi every one,

I see all kinds of awesome wheel here but I was wondering if any one knows of an aluminum wheel that has the same looks as the Axial Rockster, I like the deep offset and the arrangement of the spokes.



I tried asking this in a separate thread but I have had very little feed back, so I figure some one here might have seen a set.

[AsILayDying]

Here is some pics of my 2.2 Vanquish SSZ-Stars mounted with 1.9 FlatIrons. Love the look on my SCX10 , actually looks like a set of 20's with lower profile tire.






Sent from my Samsung Galaxy Note (Phablet)

[1tuff40]

Few pics of some of my favourite wheel/tyre combos i have

Some 2.2 RC4WD rims with TSL/SX's

1.55 Voids with Iroks

1" SLW's with 6.25" Rovers

2.2 Mayhem monsters with 2.2 Roklox

And some Trailgear creeperlocks and 37" Treps for my 1.1 FJ40

[australiancrawler]

40 Series Mickey Thompson Classic II internal beadlocks w/ Mickey Thompson Baja Claw TTC 3.8" Tyres from RC4WD

[Tommy R]

Locked Up RC Iconic beadlocks with (for now) Rogue Elements hubs, front and rear. Tires are 1.9 RC4WD MTZs that are becoming well used.

[rangercat23]

Damn Tommy when I think I have something cool you go and step it up a notch! I need to get some scale bolts...

I have always liked LockedUp's wheels, I have a set of Trail 1.9 (special edition) they are the prototypes he had made with 6 lug instead of 8. I saw them when I picked up my TF2 from him and just had to have the 6 lug to stay correct for the Yota axles. Don't have any photos of those yet though...

[doc.hamilton]

Here's my recent acquisition...

VP's for my Ridgecrest! Just mounted, prior to any run-ins with rocks!

[SHOtime]

Not quite as high grade of porn as most of the wheels in this thread but i figured for $65 id give these Integy alloys a try. Didnt have any problems mounting the rovers to them and they hold the bead extremely well. I know people are always asking about cheap aluminum locks, so here's an option.

[australiancrawler]

Twister 4.0 / Mickey Thompson Baja Claw TTC 3.8's (again)

[jcsaxial]

Axial Rocksters w Proline TSLS Soon to be new Baja Claws





And with the 2xss claws!!

[taco08jk]

TSL's on VP SLW V5's 1" wide raw finish with orange rings.

[BC-Brian]

Some Custom Polycarb wheels I designed and fab'ed. Mimic of SLW V3's that I run on the front.

[Hittman]

I received these beauties from vp today

[kaneohecrawler]

a little mayhem engineering goodness!!

2.2 licensed trail ready beadlocks wrapped in 2.2 mickey thompson mtz's

[doc.hamilton]

More VP deliciousness!!!

This is the first wheel/tire set for my mud grubbing wraith project...

[Dready]

Get your Tissues at the Ready
Patrick from Locked Up Rc's Fabulous Rock Cutter Wheels (6 Lug Specials)
Rc4wd Scale Bolts
Rogue Elements Scale Hubs
Proline 2.2 Tsl's
Scale Brake Disc Behind as well
AWESOME

[AddictedtoRC1]

So I don't recall seeing a set of these in here yet. I picked them up used from a member on here. They are JFab (pre Motoworx) wheels and let me say they are very good quality. I recommend his wheels any time.

[blakeski]

just got these built up and LOVE THEM!!