Re: LaaLaa's skinny rovers
 

I'm using crawler innovations products, custom modified dual/triple stages

Re: LaaLaa's skinny rovers
 

Sounds like it's going to take some tuning and a big pile of foam... You did such a clean job on these, do you have any suggestions or tips for getting them to come out that nice? Also, did you use exactly 1 1/2 of the 1.9's per tire? Just checking to see how many I should order. Thanks!

Re: LaaLaa's skinny rovers
 

Yeah you need exactly 1 1/2 per tire... So you'll need 6 1.9's total... The sidewalls need to have an OD of 4.25" before you glue them to the tread


Sent from my iPod touch using Tapatalk

Re: LaaLaa's skinny rovers
 

You mean if you have a 4.25" OD side wall and just glue the 1.9 on it at the bead? And this will use exactly 1.5 tyre per tire?

Re: LaaLaa's skinny rovers
 

You first need to cut the bead out of the 1.9... There's a line that goes all the way around the tire and just cut all the way around along that line... I'll post some pics later


Sent from my iPod touch using Tapatalk

Re: LaaLaa's skinny rovers
 

Here's the pics of it... First pic is where you need to cut and 2nd is when the sidewall has been cut out

http://img.tapatalk.com/d/14/09/17/8a9y7asu.jpg
http://img.tapatalk.com/d/14/09/17/e3e7umyh.jpg


Sent from my iPod touch using Tapatalk

Re: LaaLaa's skinny rovers
 

Thank you again for all the help! I would never expect a vendor to go out of their way to help potential customers do it themselves. You will definitely get my business on a set of narrowed voodoos!

Do you have any suggestions on foam setups for these tires on a 4 lb 2.2s?

Re: LaaLaa's skinny rovers
 

Thanks appreciate it."thumbsup"

Re: LaaLaa's skinny rovers
 

you wont make anymore skinny rovers??