Low cost aluminum 1.9's Just wanted to share this find for those looking for a nice, low cost 1.9 aluminum beadlock. I got these off ebay. I bought a set of 4 for $45 shipped, and then a single one for the spare tire for $13.50 shipped. The wheel alone is 7/8" wide. I just couldn't get myself to spend $150 + for a set of wheels knowing that they are going to get destroyed. http://i883.photobucket.com/albums/a...ps8dd09499.jpg http://i883.photobucket.com/albums/a...ps4222ff1a.jpg http://i883.photobucket.com/albums/a...ps958cc785.jpg |
I bought the same rims for my dingo so far I like them just make sure u keep an eye in the bead lock screws Sent from my SGH-I337M using Tapatalk 2 |
Re: Low cost aluminum 1.9's They are pretty small. Do you think they're not strong enough? |
Re: Low cost aluminum 1.9's you have them mounted up yet? how do they hold the bead and what tire are you using, I am waiting on a response because I am at this moment buying new wheels. |
Like the wheels a lot. Like the price even better! Post up a pic with the beadlocks and tire mounted. Sent From This Old Droid of Mine using tapatalk 2 |
Re: Low cost aluminum 1.9's How do they perform??? |
Re: Low cost aluminum 1.9's I don't have them mounted yet. I'm still gathering parts for a new build. Think i'm gonna go with P-L tsl's on these. I will post up when everything is up and running. |
Re: Low cost aluminum 1.9's I have PB Rock beasts mounted on these as a spare set with different wheel weights for my comp rig. The few times I have used them there has been no issues. Two of the small screws have stripped the hex in the head, so if you planned on mounting and remounting multiple times, invest is some better quality screws. Cheers H2Micr0 |
Re: Low cost aluminum 1.9's I might just use the trepadors that came with my kit, so i'll mount one up and post a pic sometime this morning. |
Re: Low cost aluminum 1.9's Quote:
|
Re: Low cost aluminum 1.9's Ok, here's a trep mounted up. The contact patch is nice and square. These tires are 1.5" wide. I wonder if I went with 1.75" wide tires, if it would crown? http://i883.photobucket.com/albums/a...psedea1a90.jpg http://i883.photobucket.com/albums/a...ps4cd51857.jpg http://i883.photobucket.com/albums/a...psdef5eeef.jpg |
Re: Low cost aluminum 1.9's hows that bead hold ? did you pull test it? |
Re: Low cost aluminum 1.9's I'm waiting on this exact answer cause if they hold great then I'm getting the cepek knock-off's from them. |
Re: Low cost aluminum 1.9's Yes, I did do a tug test and they hold great!! |
Re: Low cost aluminum 1.9's Now I cant wait to see how they're gonna look with the PL '73 Bronco body! |
Re: Low cost aluminum 1.9's what is the name of the seller or sellers shop for these ? i am needing a couple sets of cheap aluminum wheels |
Re: Low cost aluminum 1.9's |
Re: Low cost aluminum 1.9's I am now in the middle of mounting up some of the new Proline XL TSL Swampers on these rings. A bit fiddly but going on nicely. Cheers H2Micr0 |
Re: Low cost aluminum 1.9's Quote:
|
Re: Low cost aluminum 1.9's After I got them mounted, and stripped one thread (inside edge thankfully - bit of threadlock will hopefully hold it in place), I spent about 30mins crawling on my pile of rocks. Was able to do a climb I couldn't with the Pit Bulls on several times, and really put it in some awkward positions. No pulled beads etc. Quite happy. Cheers H2Micr0 |
All times are GMT -6. The time now is 10:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com