New SSD 2.2 Proline Rings for SSD wheels
 

http://www.ssd-rc.com/images/pl%20rings%20main.jpg

Allow Proline 2.2 tires to be fitted to SSD 2.2 steel wheels (SSD00019& SSD00025) and SSD 2.2 Assassin wheels (SSD00029 & SSD00045)

2.2 Proline Tire Compatibility Rings

Re: New SSD 2.2 Proline Rings for SSD wheels
 

YAY! I was hoping these would become a thing!!!

Re: New SSD 2.2 Proline Rings for SSD wheels
 

wow! Will there be a 1.9 version as well?

Sent from my Nexus 10 using Tapatalk

Re: New SSD 2.2 Proline Rings for SSD wheels
 

SSD is no doubt becoming my go to, favorite RC parts mfg'er. You guys make great products. Every single thing I own of yours is perfect.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

All of our 1.9 wheels are already Proline tire compatible so no need for rings.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I see. Thanks for the info. I found prolines harder to mount, but I blame the tires and not the wheels. I have been exceptionally happy with all my SSD purchases :)

Sent from my Nexus 10 using Tapatalk

Re: New SSD 2.2 Proline Rings for SSD wheels
 

is this going to happen for the rock racers too? I'd rather not modify them if I can help it. What's the difference between these and the stock ring.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I've got a set on my 2.2 10-holes. Tires mounted up sooo easy. "thumbsup"

http://i.imgur.com/fvMuuiJ.jpg

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Yes we plan to make some for the SSD Rock Racer wheels also.

Proline tire beads are just different dimensions from all other brands.
So these rings are designed to hold Proline beads. So the width and OD are different.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Hey do u like the ssd 10 holes I'm looking st the same wheels for my wraith

Re: New SSD 2.2 Proline Rings for SSD wheels
 

LOVE them... just be sure to pick up a nice 2mm nut driver from Locked-Up RC to tighten up all the scale hardware. "thumbsup"

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I like mine. "thumbsup"

X2 "thumbsup"

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I have some steel Trail 1.9's and a set of 1.9 Proline tires and it's impossible for me to mount them on this wheels, is there a special procedure for doing this?

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Are they XL tires? If so they are not the same as other PL tires beads.
There is no special procedure. a few longer screws help to get started though. Then you can switch them out for the shorter screws after thou have a few installed.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Hey I just got a set of the 10 holes and putting a set of pit bulls on them and do I need the black ring or should I take it out thanks

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Absolutely loving my SSD steelies; just mounted up some proline tsl xl's tonight with the SSD Proline Compatibility ring. No problems at all! This is my 2nd set of ssd wheels and I plan on getting a third soon. "thumbsup"

http://i67.tinypic.com/npkjtf.jpg

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I'm just having a hard time putting them together and getting the bead to stay

Re: New SSD 2.2 Proline Rings for SSD wheels
 

Couple of questions. Are these wider than standard internal rings? Also curious if they theoretically should work with any 2.2 3 piece wheel.


Sent from my iPhone using Tapatalk

Re: New SSD 2.2 Proline Rings for SSD wheels
 

I wish you'd offer a Proline setup that way we don't have to buy the set of wheels and rings only to not use the standard rings.

Re: New SSD 2.2 Proline Rings for SSD wheels
 

It's funny you should say that...