08-22-2016, 07:18 PM | #1 |
Pebble Pounder Join Date: Mar 2014 Location: brainerd
Posts: 157
| cant find hex hubs
so i bought some rc4wd ones and there to small so here is pics of the rim and size to the outside of the holes i want some 12mm hex hubs for it over the pin style hub i have |
Sponsored Links | |
08-22-2016, 07:33 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: cant find hex hubs
After the hex drive hubs come loose on you for the 5th time in the last 2 batteries you'll wish you still had pin drive hubs.
|
08-22-2016, 08:40 PM | #3 |
Pebble Pounder Join Date: Mar 2014 Location: brainerd
Posts: 157
| Re: cant find hex hubs |
08-22-2016, 09:34 PM | #4 |
RCC Addict Join Date: May 2011 Location: at home
Posts: 1,099
| Re: cant find hex hubs
don't agree??? very descriptive unfortunately rc4wd bolt pattern does not match anything else find out what the disagreement is between them or get new wheels if it is a question of offset rc4wd has deeper hubs |
08-23-2016, 07:38 PM | #5 |
Pebble Pounder Join Date: Mar 2014 Location: brainerd
Posts: 157
| Re: cant find hex hubs
rc4wd hubs are to small for this bolt pattern and been awile since i put em on i think the pins arnt far enough away from the tubes and the wheels bind on the tubes |
08-23-2016, 08:24 PM | #6 |
RCC Addict Join Date: May 2011 Location: at home
Posts: 1,099
| Re: cant find hex hubs
is something keeping the outer knuckle bearing from seating all the way in? or the inner knuckle bearing from seating in well? do all 4 wheels do the same? |
08-23-2016, 08:45 PM | #7 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: cant find hex hubs
You can drill those wheel bolt holes out with a 1/8" drill bit and use VP SLW hubs. At least I did on some Pro10's years ago. Edit for link. Szczerba's IFS SCX Build .... Last edited by Szczerba; 08-23-2016 at 08:48 PM. |
08-23-2016, 11:06 PM | #8 | |
Pebble Pounder Join Date: Mar 2014 Location: brainerd
Posts: 157
| Re: cant find hex hubs Quote:
| |
08-24-2016, 11:25 AM | #9 | |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: cant find hex hubs Quote:
| |
08-24-2016, 06:20 PM | #10 | |
Pebble Pounder Join Date: Mar 2014 Location: brainerd
Posts: 157
| Re: cant find hex hubs Quote:
oh ok yea these are a bit bigger then them put one bolt in and the bolt on the other side is in the big center hole | |
09-25-2016, 05:51 AM | #11 |
Quarry Creeper Join Date: Jan 2013 Location: LP, LA
Posts: 401
| Re: cant find hex hubs
Am using the RC4wd pin hub Wagons on an Ascender and had to put 2 thin 5mm washers between the pin and the bearing to get them to snug up without end-play. Working fine so far without any rubbing.
|
cant find hex hubs - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where do I find gmade 12mm to 14mm hex adaptors? | scoobyblue | G-Made Crawlers | 4 | 04-14-2012 11:40 PM |
N E 1 where I can find a 1.3mm ground or machined hex driver ? | Joat | Tools, and Procedures | 1 | 02-22-2009 07:30 AM |
help me find wheel 2.2 17mm hex 1/2 offset | buju | Tires and Wheels | 6 | 10-09-2008 02:20 PM |
| |