Pro-Line How To: Cut-N-Shut 1.9's to 1.55's A Very Special Thanks to Sean Barrett for this awesome How-To Article: This is a little tutorial on how to cut-n-shut 1.9 tires to fit on 1.55 wheels you will need Pro-Line 1.9" tires of your choice and 1.55" Wheels of your choice.Pro-Line 1.9" TSL SX Super Swampers #1163-14 were used in this setup http://www.prolineracing.com/blog/wp...ds/SBCNS-9.jpg Then you will need a sharp pair of scissors to cut the tires and some fast set thin ca glue and some rubberized ca tire glue. http://www.prolineracing.com/blog/wp...ds/SBCNS-1.jpg Take the tire in your hand and find blank spots on the side of the tire to make sure your not cutting into the lettering. http://www.prolineracing.com/blog/wp...ds/SBCNS-2.jpg http://www.prolineracing.com/blog/wp...ds/SBCNS-4.jpg Hold the scissors perpendicular to the bead of the tire and cut next to one of the lugs on the tread of the tire. Cut as straight as possible, or follow tread pattern for interlocking fit. http://www.prolineracing.com/blog/wp...ds/SBCNS-3.jpg Place tire on the wheel as you would to mount it and check to see that the cut location is a proper fit, there should be a slight gap, this will ensure a nice tight fit after gluing. http://www.prolineracing.com/blog/wp...ds/SBCNS-5.jpg Once you are happy with the cut, its time to glue'em up. you will want to tack the tire back together with the quick set CA glue, such as Pro-Line Tire Glue. Once dry, you will want to add another layer of rubberized glue along the seam inside the tire. http://www.prolineracing.com/blog/wp...ds/SBCNS-6.jpg Once dry, mount normally. Congratulations, you are now the proud owner of Pro-Line 1.55" Tires! http://www.prolineracing.com/blog/wp...ds/SBCNS-7.jpg http://www.prolineracing.com/blog/wp...ds/SBCNS-8.jpg |
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Great How To, will be giving this a try! Thanks Sean and Pro-Line! |
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Great writeup. It's a shame that pro-line can't manage to make tires in a bead radius that fits correctly the vast majority of RC4WD, Locked up, Mayhem, TSS, Gearhead, and Vanquish wheels etc. Pro-line tires no matter how cool they are will always fit like a worn out pair of socks straight out of the bag. :roll: |
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Quote:
|
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Quote:
Quote:
|
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's I know this is an old thread but it is what come up in my search. Why doesn't Proline just make some 1.55 Swamper TSL/SX's in a standard and xl height. I am getting ready to build (read: try to build) a 1.55 scaler that will be easier to carry in my truck as I drive all over the country for work. I started building a 1.9 then wanted to go smaller. So sold the 1.9. I just don't see why Proline doesn't make any 1.55 tires. If anyone here knows someone at Proline please put a bug in their ear. Sorry for the rant. Wayne |
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Nice tutorial. What’s the final external diameter of the 1.55 tire? |
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's Quote:
|
Re: Pro-Line How To: Cut-N-Shut 1.9's to 1.55's I would for sure buy some 1.55 proline tires. 1.9 size wheels just don't look right on a Tf2, Imo. |
All times are GMT -6. The time now is 08:50 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com