SSD assassin wheels, dueces wild, pro line super swampers a no go

[Motorider]

Well I learned a tough lesson tonight. I tried to mount up a new set of pro line TSL super swampers to a set of SSD assassin wheels with dueces wild foams. 3 of 4 had the bead poo out when finished. Upon disassembly I found 3 of 4 beads cut by the wheels. Not happy.

What wheels work with these huge proline beads?


What glue are you all using to do cut and shuts? I need to glue the beads back onto my tires.

Sent from my SM-N920V using Tapatalk

[durok]

SSD makes Pro-Line versions of all 2.2 versions of their wheels specifically because of the bead differences.


2.2 WHEELS

(FYI)

[SSD]

Also the Proline compatible rings for our wide wheels will be available soon.

[mikemcE]

I use medium CA for gluing


Hang up and Drive

[Motorider]

Originally Posted by mikemcE

I use medium CA for gluing


Hang up and Drive

Thank you mike.

Sent from my SM-N920V using Tapatalk

[Motorider]

Originally Posted by SSD

Also the Proline compatible rings for our wide wheels will be available soon.

How soon?

Wide wheels? These came with a wraith I purchased. Not sure if they are wide or normal. Guess I'll have to measure.

I hated the tires he had on them so I bought the super swampers to find out I destroyed the beads with the wheels. Ugghhhh.

Sent from my SM-N920V using Tapatalk

[Motorider]

Originally Posted by SSD

Also the Proline compatible rings for our wide wheels will be available soon.

Looking at your page, all I could find was assassin wheels in wide. Did you used to sell a narrow version?

Sent from my SM-N920V using Tapatalk

[SSD]

Yes we used to make narrow wheels last year. We also use to make narrow Proline compatibility rings (SSD00114) but I doubt you will be able to find them now.

RC4WD 2.2 Proline compatibilty rings will work on those (and any of our old narrow) wheels: 2.2 Proline Tire Compatible Internal Beadlock Rings

[Yeti.stealth]

Is this problem the same when fitting 1.9 proline tyres to SSD 1.9 wheels too?

[SSD]

Originally Posted by Yeti.stealth

Is this problem the same when fitting 1.9 proline tyres to SSD 1.9 wheels too?

No.

1.9 Proline tires are not so different to others that a separate ring is needed.

[Yeti.stealth]

Good to know, thanks for the info.

[Motorider]

Originally Posted by SSD

Yes we used to make narrow wheels last year. We also use to make narrow Proline compatibility rings (SSD00114) but I doubt you will be able to find them now.

RC4WD 2.2 Proline compatibilty rings will work on those (and any of our old narrow) wheels: 2.2 Proline Tire Compatible Internal Beadlock Rings

Thanks for the info

Sent from my SM-N920V using Tapatalk

[Motorider]

Another question, would these proline tsl super swampers tires perform better on the narrow wheels or the wide wheels?

Sent from my SM-N920V using Tapatalk