8 Hole Shooters With OMF Rings...

[ThatJeeper2017]

I was wondering if anyone has had any experience with vanquish rings on the Axial 1.9 8 hole shooters. Pictures welcomed.


Sent from my iPhone using Tapatalk

[svt923]

The hole pattern on the Vanquish rings doesn't line up on Axial wheels.

[ThatJeeper2017]

Originally Posted by svt923

The hole pattern on the Vanquish rings doesn't line up on Axial wheels.

Hmmm. Odd. I keep seeing 8 holes with aftermarket aluminum rings.


Sent from my iPhone using Tapatalk

[ElChupacabra]

Originally Posted by ThatJeeper2017

Hmmm. Odd. I keep seeing 8 holes with aftermarket aluminum rings.


Sent from my iPhone using Tapatalk

You're probably seeing either Chanquish wheels or Locked Up RC Iconics with different rings. Locked Up RC has a bunch of different rings that fit their Iconics which are 8 holes.... 1.9" Iconic SLWC Beadlock Wheel

The Chanquish wheels now also have a few different rings that fit their 8 hole design. I have a few sets.

[lonleycreeper]

Locked up advertises that their rings work with axial...

[AWraith build]

Originally Posted by lonleycreeper

Locked up advertises that their rings work with axial...

I've ran there rings on axial 8 hole. They do fit. They have a different bolt patten than vanquish wheels. I ran into that when I was trying to run there rings on methods. The do make a few for vanquish but most are there bolt pattern which is the same as axial. It's kinda a pain bc the super short bolts you have to use on axial that are not mounting bolts sometimes don't want to screw in so you have to try a few bolts. It's the way the bolts are made I think.

[ThatJeeper2017]

Originally Posted by ElChupacabra

You're probably seeing either Chanquish wheels or Locked Up RC Iconics with different rings. Locked Up RC has a bunch of different rings that fit their Iconics which are 8 holes.... 1.9" Iconic SLWC Beadlock Wheel

The Chanquish wheels now also have a few different rings that fit their 8 hole design. I have a few sets.

I’m positive that they are Axials because of the fake bolts around the wheel nut.


Sent from my iPhone using Tapatalk

[ElChupacabra]

Originally Posted by ThatJeeper2017

I’m positive that they are Axials because of the fake bolts around the wheel nut.


Sent from my iPhone using Tapatalk

Pictures would help identify things....

[OSRC]

Gearhead makes rings for Axial 1.9's. Not aluminum though, Delrin I believe. Not sure if that is helpful or even relevant, just throwing it out there.

[svt923]

Originally Posted by ThatJeeper2017

Hmmm. Odd. I keep seeing 8 holes with aftermarket aluminum rings

Locked up rings use the same bolt pattern as Axial wheels, there are a few others but I can't remember who makes them.

[aztitan]

Mthead makes all kinds of Delrin rings