Go Back   RCCrawler Forums > RCCrawler General Tech > Tires and Wheels
Loading

Notices

Thread: 7mm to 12mm hub adaptor

Reply
 
LinkBack Thread Tools Display Modes
Old 10-14-2018, 04:58 PM   #1
Pebble Pounder
 
Join Date: Nov 2015
Location: anna bay
Posts: 146
Default 7mm to 12mm hub adaptor

Hey guys,
So iv brought a Kmart rock crawler for a family member so they can come crawling with me when iv got my bully 2 finished.
It has 7mm hex hubs, I'm wanting to buy hex hub adaptors so I can fit 12mm hex hubs to fit proper crawling wheels/tires.
Do they make these at all? Or am I stuck with the stock wheels?
Thanks guys
Snyds
snydas1987 is offline   Reply With Quote
Sponsored Links
Old 10-14-2018, 05:31 PM   #2
RCC Addict
 
Join Date: Nov 2014
Location: Nowhere
Posts: 1,326
Default Re: 7mm to 12mm hub adaptor

Are the hubs molded to the axles or does it use a pin like a standard RC axle?
Sneetches is offline   Reply With Quote
Old 10-14-2018, 05:42 PM   #3
Pebble Pounder
 
Join Date: Dec 2007
Location: canada edmonton alberta
Posts: 188
Default Re: 7mm to 12mm hub adaptor

What I have heard is the thickness of the some? adapters leaves not enough thread for the wheel nuts.
chbronco is offline   Reply With Quote
Old 10-14-2018, 08:55 PM   #4
RCC Addict
 
Join Date: Feb 2016
Location: Santa Maria, CA
Posts: 1,751
Default Re: 7mm to 12mm hub adaptor

Dromida DIDC1144 might do the trick. My son used some on his Dromida 4.18 that has the 7mm hex molded into the end of the stub shaft and they've never given any trouble. I'd guess they added 1.5mm per side at the most.

https://www.amazon.com/Dromida-Alumi.../dp/B00P9IJV2Q
TheLetterJ is offline   Reply With Quote
Old 10-15-2018, 01:16 AM   #5
Pebble Pounder
 
Join Date: Nov 2015
Location: anna bay
Posts: 146
Default Re: 7mm to 12mm hub adaptor

Yeah there molded into the axle stubs.
Thanks I'll check em out.
snydas1987 is offline   Reply With Quote
Reply



7mm to 12mm hub adaptor - Similar Threads
Thread Thread Starter Forum Replies Last Post
Thin 7mm socket for hub/wheel nut? GTSLOW Tools, and Procedures 19 09-25-2015 08:04 PM
Hex Hub Adaptor Size ???????????? RC Crawler Boyz General Crawlers 4 01-14-2006 05:21 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 04:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com