Go Back   RCCrawler Forums > RCCrawler General Tech > Tires and Wheels
Loading

Notices

Thread: Testing some low cost tyres...

Reply
 
LinkBack Thread Tools Display Modes
Old 01-19-2020, 08:27 AM   #1
Pebble Pounder
 
Join Date: Sep 2019
Location: Sweden
Posts: 113
Default Testing some low cost tyres...

Highly unscientific as usual but the test gave me some insight into which of my cheap tyres works the best on smooth wooden surfaces.

All the tyres were wiped clean between the runs with a cloth that I sprayed some WD40 on to ensure optimal and consistent grip.

Cheers and thanks for watching!


The first video shows my four sets of tyres on my Redcat Gen 7 chassis with Portal Axles.

https://youtu.be/CnvMyJ3U_sg




The second video shows our FTX Fury Xtreme chassis with some tweaks.

https://youtu.be/9O8zDDiNFEs


Last edited by Esseaux; 01-19-2020 at 09:00 AM.
Esseaux is offline   Reply With Quote
Sponsored Links
Old 01-23-2020, 09:24 AM   #2
Quarry Creeper
 
Join Date: Sep 2018
Location: Simcoe Ontario Canada
Posts: 291
Default Re: Testing some low cost tyres...

I found wood to be a very deceiving materials when testing tire/ rubber compounds. I had cheap hard rubber getting better traction than the top line tires...,


Sent from my iPhone using Tapatalk
lkvisser is offline   Reply With Quote
Old 01-23-2020, 10:47 AM   #3
Pebble Pounder
 
Join Date: Sep 2019
Location: Sweden
Posts: 113
Default Re: Testing some low cost tyres...

That is True what you say. My wooden board is just one way of conducting tests like this. I feel it's a pretty controlled and consistent way of doing such a test compared to doing a test on a pile of rocks where the line you drive for each test slightly differs.

This test proved at least a couple of theories that I had before doing the test. One was that the larger the contact area of the tyre was, the better the grip on a flat polished surface. The FTX has the largest contact area and second was the Louise (Duratrax) and they also performed best on that board.

Once the car hits the trail or rockpile these results will not matter much ��

Thanks for the comment
Esseaux is offline   Reply With Quote
Old 01-23-2020, 11:17 AM   #4
Quarry Creeper
 
Join Date: Nov 2015
Location: US
Posts: 456
Default Re: Testing some low cost tyres...

Every time I see one of these tests I cant help but think how of how many times I have driven on a inclined wooden surface....none

That being said I don’t know of a better way to test functionality of a compound or tread design that isn’t somewhat anecdotal
odomandr is offline   Reply With Quote
Old 01-23-2020, 02:19 PM   #5
Pebble Pounder
 
Join Date: Sep 2019
Location: Sweden
Posts: 113
Default Re: Testing some low cost tyres...

This is probably the first time I've driven on such a surface too. Wooden obstacles do appear now and then on some tracks and is usually raw untreated pieces of planks which probably has more grip than my board from a bookshelf which is very smooth and polished.

As we have no big rocks in my neck of the woods, bookshelves are a good substitute
Esseaux is offline   Reply With Quote
Old 01-23-2020, 02:47 PM   #6
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,935
Default Re: Testing some low cost tyres...

Quote:
Originally Posted by Esseaux View Post
As we have no big rocks in my neck of the woods, bookshelves are a good substitute
That's a bummer that you don't have any good crawling spots near you! But I'm glad you improvise and still crawl on what you have.
JatoTheRipper is offline   Reply With Quote
Old 01-23-2020, 10:41 PM   #7
Pebble Pounder
 
Join Date: Sep 2019
Location: Sweden
Posts: 113
Default Re: Testing some low cost tyres...

Improvisation is my middle name
Esseaux is offline   Reply With Quote
Old 02-04-2020, 01:28 AM   #8
Newbie
 
Join Date: Jan 2020
Location: Duarte, CA
Posts: 6
Default Re: Testing some low cost tyres...

Not bad at all. Awesome work.
mindseye is offline   Reply With Quote
Reply



Testing some low cost tyres... - Similar Threads
Thread Thread Starter Forum Replies Last Post
Low Cost, Reliable Micro Brushed ESC? ajsmcs Losi Micro-Rock Crawler 13 10-14-2015 09:28 AM
Low cost aluminum 1.9's Johnnysplits Tires and Wheels 83 05-25-2015 01:46 PM
Low cost new look ke6geu Axial AX-10 Scorpion 22 01-03-2014 02:39 PM
Could this be used as a low cost power supply for charger? Larry62 Electronics 7 05-22-2008 04:10 PM
Hi Torque, low cost...too good to be true?? metomwhou Electronics 6 01-31-2006 04:39 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 09:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com