|
| LinkBack | Thread Tools | Display Modes |
11-06-2010, 08:23 AM | #41 |
Rock Stacker Join Date: Sep 2007 Location: east mich
Posts: 49
| try this www.eastwood.com pt#12582zp
|
Sponsored Links | |
11-06-2010, 11:54 AM | #42 |
Quarry Creeper Join Date: Sep 2010 Location: Central MN H-Town
Posts: 291
|
So after reading this post I've decided to ditch my xr10's orange bead locks. I ran over to Menard's and picked up a gallon of grease lightning for 8 bucks and now in the process of deanodizing. Within 20 seconds you can see the reaction starting and after 10 minutes about half the orange is gone already. when done I'll polish them up and post a pic. |
11-06-2010, 12:39 PM | #43 |
Quarry Creeper Join Date: Sep 2010 Location: Central MN H-Town
Posts: 291
|
left is straight out of the grease lightning and right is after a quick polish |
11-06-2010, 01:42 PM | #44 |
Rock Crawler Join Date: Jun 2010 Location: Yelm,WA
Posts: 695
|
i took my bead lock rings to work and blasted them with our Trinco blast cabinet, we use a plastic media & it works like a charm
|
11-08-2010, 10:24 AM | #45 |
Pebble Pounder Join Date: May 2010 Location: Indianapolis
Posts: 149
| + 1 on greased lightning. quick and relatively safe to handle. thanks for the tip, sry no pics. |
11-09-2010, 03:32 PM | #46 |
Rock Stacker Join Date: Sep 2007 Location: Lambertville
Posts: 83
|
If you guys get your hands on caustic soda, be sure to wear gloves and safety glasses. That stuff can be real nasty.
|
11-10-2010, 04:16 PM | #47 |
Rock Crawler Join Date: Mar 2009 Location: Frisco, Texas
Posts: 721
|
GOSH PEOPLE ARE SO COMPLICATED!!! i used a wire brush on a grinder, trust me lol
|
11-10-2010, 05:53 PM | #48 | |
www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville
Posts: 4,506
| Quote:
So you go on with your bad self and enoy the wire wheel method. | |
12-11-2010, 07:40 PM | #49 |
Rock Crawler Join Date: Apr 2006 Location: Folsom, CA
Posts: 620
| |
01-02-2011, 01:16 PM | #50 |
Newbie Join Date: Sep 2010 Location: citrus heights
Posts: 11
|
great idea i have been using overcleaner i hate it thanks |
04-20-2011, 07:35 AM | #51 |
I wanna be Dave Join Date: Aug 2008 Location: Austin, TX, USA
Posts: 4,273
|
I appreciate everyone's comments and input on this topic. I've used the Drano method and the parts are left with a pretty nasty, dark coating. It come off relatively easily, but it's still a bit of a hassle. No pitting, though. So I'm going to pick up some Greased Lightning today since it appears to leave a much nicer finish. I've got a question about polishing since I've never really polished unfinished aluminum before. What kind of polish seems to work well and what method(s) are you using? If using a Dremel, what kind of polishing attachment works best? I've got some aluminum links I've taken a flapper wheel to in order to remove the anodize. It works okay, but the surface is pretty rough afterward. Now I'm going to have to chuck them into my drill press and use some sandpaper to smooth them out again. Boo! So I'd like to try the Greased Lightning method to save a step. |
05-02-2011, 09:01 AM | #52 |
Quarry Creeper Join Date: May 2009 Location: melbourne/palm bay
Posts: 203
|
bit off topic, but i hear every1 talking about mothers polish.... WENOL if u can find it blows away ANY polish ive ever used... Excelent for fine aluminum or any precious metal.."more like jewelers rouge than polish" |
05-02-2011, 10:00 AM | #53 |
Rock Crawler Join Date: Jun 2009 Location: Colorado Springs
Posts: 738
|
I use dran-o but dont leave it in there very long
|
05-02-2011, 09:17 PM | #54 |
Rock Stacker Join Date: Mar 2011 Location: coos bay, Oregon
Posts: 55
|
I use Greased Lightning on all my deanodizing projects. I went to the Goodwill and picked up a little stainless cooking bowl and a small hotplate for like 6 bucks and that cut my time down to 10-15 minutes. Just enough in the bowl to cover the parts and medium heat on the hotplate work great! |
05-02-2011, 09:51 PM | #55 | |
Pebble Pounder Join Date: Sep 2008 Location: n.e.pa
Posts: 156
| Quote:
i trust it and it works great | |
05-03-2011, 10:25 AM | #56 |
Rock Crawler Join Date: Oct 2009 Location: Wasilla, Alaska
Posts: 852
|
I used greased lightning in all the links and rings I de-anodized and then mothers billet polish (out performs regular mothers by far) I usually just put the links in a drill and polish, for the wheels and rings I use one of the small mothers power balls.
Last edited by AkFordfan; 05-03-2011 at 10:27 AM. |
07-21-2011, 08:23 PM | #57 |
Rock Stacker Join Date: Mar 2011 Location: RI
Posts: 69
|
I read through this thread today. When I got home I checked the garage. I had a full bottle of purple power,it has the same chemical make up as greased lightning. So I tried it. Works great! Now no more ugly axial green. It took about half hour to remove the annodizing.
|
07-21-2011, 09:41 PM | #58 |
Newbie Join Date: Jul 2010 Location: Minnesota, USA
Posts: 30
|
I will certainly be using this information for some bicycle parts before the summer is over! (I like my couple ano crawler parts. ) Thanks so much for the info. Over cleaner was always to messy and stinks! |
07-22-2011, 07:22 AM | #59 |
I wanna be Dave Join Date: Nov 2009 Location: Houston
Posts: 2,004
|
Greased lightning is an awesome product! I have two bottles. One is a 50/50 mix with water and I use it to clean off dirt and mud off my all my rc tires and gets them squeaky clean with a fat brush of course. Haven't tried Greased Lightning on deanodizing...awesome tip btw! I did get a bad chemical burn from Goof Off cleaning some stuff a while back. Should have worn gloves lol. Cleaning muddy parts off a 5th scale is a PITA. |
07-24-2011, 09:48 AM | #60 |
Pebble Pounder Join Date: Aug 2009 Location: taiwan
Posts: 146
|
can't find greased lightning here, can I use Mr.Muscle Multi-Task Kitchen instead?thanx!
|
| |